Re: [PATCH v4 5/5] rtc: isl1219: add device tree docu

From: Rob Herring
Date: Wed Jul 11 2018 - 11:16:25 EST


On Tue, Jul 10, 2018 at 09:44:15AM +0000, Denis OSTERLAND wrote:
> From: Denis Osterland <Denis.Osterland@xxxxxxxxx>
>
> The devicetree documentation for the ISL1219 device tree
> binding is added with an short example. It is not a trivial
> device, because it supports two interrupt souces.

s/souces/sources/

>
> Signed-off-by: Denis Osterland <Denis.Osterland@xxxxxxxxx>
> ---
> .../devicetree/bindings/rtc/isil,isl1219.txt | 29 +++++++++++++++++++
> 1 file changed, 29 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/rtc/isil,isl1219.txt
>
> diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1219.txt b/Documentation/devicetree/bindings/rtc/isil,isl1219.txt
> new file mode 100644
> index 000000000000..f26f1e9d4bde
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/isil,isl1219.txt
> @@ -0,0 +1,29 @@
> +Intersil ISL1219 I2C RTC/Alarm chip with event in
> +
> +ISL1219 has additional pins EVIN and #EVDET for tamper detection.
> +
> +Required properties supported by the device:
> +
> + - "compatible": must be "isil,isl1219"
> + - "reg": I2C bus address of the device
> +
> +Optional properties:
> +
> + - "interrupt-names": list which may contains "irq" and "evdet"
> + - "interrupt-parent", "interrupts", "interrupts-extended":
> + for passing the interrupt line of the SoC connected to #IRQ pin
> + and #EVDET pin of the RTC chip.

Just list 'interrupts' and how many there are. interrupt-parent is
implied and may be in a parent node. interrupts-extended is also
implicitly allowed as needed.

> + - "isil,ev-evienb": if present bit can be set to disable event input pull-up
> +
> +
> +Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12
> + and #EVDET pin connected to SoC gpio2 pin 24:
> +
> + isl1219: rtc@68 {
> + compatible = "isil,isl1219";
> + reg = <0x68>;
> + interrupt-names = "irq", "evdet";
> + interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>,
> + <&gpio2 24 IRQ_TYPE_EDGE_FALLING>;
> + };
> +
> --
> 2.18.0
>
>
>
> Diehl Connectivity Solutions GmbH
> Geschäftsführung: Horst Leonberger
> Sitz der Gesellschaft: Nürnberg - Registergericht: Amtsgericht
> Nürnberg: HRB 32315
> ___________________________________________________________________________________________________
>
> Der Inhalt der vorstehenden E-Mail ist nicht rechtlich bindend. Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen.
> Informieren Sie uns bitte, wenn Sie diese E-Mail faelschlicherweise erhalten haben. Bitte loeschen Sie in diesem Fall die Nachricht.
> Jede unerlaubte Form der Reproduktion, Bekanntgabe, Aenderung, Verteilung und/oder Publikation dieser E-Mail ist strengstens untersagt.
> The contents of the above mentioned e-mail is not legally binding. This e-mail contains confidential and/or legally protected information. Please inform us if you have received this e-mail by
> mistake and delete it in such a case. Each unauthorized reproduction, disclosure, alteration, distribution and/or publication of this e-mail is strictly prohibited.