Re: [PATCH v2 0/4] sun8i: r40: add AHCI

[LABBE Corentin]

On Mon, Jul 09, 2018 at 11:44:20PM +0800, Icenowy Zheng wrote:
> 
> 
> ä 2018å7æ9æ GMT+08:00 äå11:20:54, Corentin Labbe <clabbe@xxxxxxxxxxxx> åå:
> >Hello
> >
> >With Moeicenowy's agreement, I have take leadership ot this patchset.
> >
> >There are no really changes appart renaming struct quirck to variant.
> >
> >Since the last serie is really old, I will answer comment here.
> >The two regulator (1.2 and 2.5V) are not for the PHY since:
> >- nothing in the schematic said that they are for the PHY, they seems
> >  only for controller
> >- all other AHCI driver use 5V for the target/PHY (vs 1.2/2.5 which
> >  cannot be used for target)
> 
> Target is not equal to PHY. Target means the supply
> of the disk, which can be usually 5v (for 2.5" HDD) or
> 12v (3.5" HDD).
> 
> By reading Wikipedia articles  about SATA and LVDS, I assume
> 2.5V is for PHY and 1.2V is for internal digital logic (VDD-SYS
> is commonly 1.2V on 40nm Allwinner SoCs; 2.5V VDD can be
> used to efficiently deliver ~1.2V LVDS.)
> 
> P.S. VDD-SATA and VDD25-SATA also exist on A20, and by checking
> Banana Pi M1 (the original Banana Pi) schematics, VDD-SATA
> is connected to common VDD-SYS (called INTVDD on the
> schematics) and VDD25-SATA is connected to an always-on
> fixed LDO, maybe due to the lack of power outputs on AXP209.
> 

So we still need to add a regulator on the controller and add an optionnal "phy" regulator for AHCI port.