RE: [PATCH v2 1/4] pwm: fsl-ftm: Added a dedicated IP interface clock

From: Shenwei Wang
Date: Mon Jul 09 2018 - 15:00:45 EST


Thank you, Thierry.
Have you also reviewed and accepted the other 3 patches in this serial?

Regards,
Shenwei

-----Original Message-----
From: Thierry Reding [mailto:thierry.reding@xxxxxxxxx]
Sent: Monday, July 9, 2018 12:09 PM
To: Shenwei Wang <shenwei.wang@xxxxxxx>
Cc: linux-pwm@xxxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx
Subject: Re: [PATCH v2 1/4] pwm: fsl-ftm: Added a dedicated IP interface clock

On Fri, Jun 08, 2018 at 02:22:34PM -0500, shenwei.wang@xxxxxxx wrote:
> The current driver assumes that the ftm_sys clock works as one of the
> clock sources for the IP block as well as the IP interface clock. This
> assumption does not apply any more on the latest i.MX8x SoC family. On
> i.MX8x SoCs, a dedicated IP interface clock is introduced and it must
> be enabled before accessing any FTM registers. Moreover, the clock can
> not be used as the source clock for the FTM IP block. This patch
> introduces the ipg_clk as the dedicated IP interface clock and by
> default it is the same as the ftm_sys clock if not specified.
>
> Signed-off-by: Shenwei Wang <shenwei.wang@xxxxxxx>
> ---
> drivers/pwm/pwm-fsl-ftm.c | 22 ++++++++++++++++------
> 1 file changed, 16 insertions(+), 6 deletions(-)

Applied, thanks.

Thierry