Re: [PATCH] mtd: spi-nor: cadence-quadspi: Fix direct mode write timeouts

From: Marek Vasut
Date: Sat Jun 30 2018 - 13:55:09 EST


On 06/30/2018 12:54 PM, Vignesh R wrote:
> Sometimes when writing large size files to flash in direct/memory mapped
> mode, it is seen that flash write enable command times out with error:
> [ 503.146293] cadence-qspi 47040000.ospi: Flash command execution timed out.
>
> This is because, we need to make sure previous direct write operation
> is complete by polling for IDLE bit in CONFIG_REG before starting the
> next operation.
>
> Fix this by polling for IDLE bit after memory mapped write.
>
> Fixes: a27f2eaf2b27 ("mtd: spi-nor: cadence-quadspi: Add support for direct access mode")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Vignesh R <vigneshr@xxxxxx>

Reviewed-by: Marek Vasut <marek.vasut@xxxxxxxxx>

> ---
> drivers/mtd/spi-nor/cadence-quadspi.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
> index c3f7aaa5d18f..d7e10b36a0b9 100644
> --- a/drivers/mtd/spi-nor/cadence-quadspi.c
> +++ b/drivers/mtd/spi-nor/cadence-quadspi.c
> @@ -926,10 +926,12 @@ static ssize_t cqspi_write(struct spi_nor *nor, loff_t to,
> if (ret)
> return ret;
>
> - if (f_pdata->use_direct_mode)
> + if (f_pdata->use_direct_mode) {
> memcpy_toio(cqspi->ahb_base + to, buf, len);
> - else
> + ret = cqspi_wait_idle(cqspi);
> + } else {
> ret = cqspi_indirect_write_execute(nor, to, buf, len);
> + }
> if (ret)
> return ret;
>
>


--
Best regards,
Marek Vasut