[PATCH v2 5/5] net: emaclite: Remove unnecessary spaces

From: Radhey Shyam Pandey
Date: Thu Jun 28 2018 - 03:40:15 EST


This patch fixes below checkpatch checks-

CHECK: spaces preferred around that '*' (ctx:VxV)
CHECK: No space is necessary after a cast

Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxxxxx>
---
Changes from v1:
- None
---
drivers/net/ethernet/xilinx/xilinx_emaclite.c | 27 +++++++++++++------------
1 files changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 59f4ab8..8b93940 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -95,11 +95,11 @@



-#define TX_TIMEOUT (60*HZ) /* Tx timeout is 60 seconds. */
+#define TX_TIMEOUT (60 * HZ) /* Tx timeout is 60 seconds. */
#define ALIGNMENT 4

/* BUFFER_ALIGN(adr) calculates the number of bytes to the next alignment. */
-#define BUFFER_ALIGN(adr) ((ALIGNMENT - ((u32) adr)) % ALIGNMENT)
+#define BUFFER_ALIGN(adr) ((ALIGNMENT - ((u32)adr)) % ALIGNMENT)

#ifdef __BIG_ENDIAN
#define xemaclite_readl ioread32be
@@ -239,8 +239,8 @@ static void xemaclite_aligned_write(void *src_ptr, u32 *dest_ptr,

/* Set up to output the remaining data */
align_buffer = 0;
- to_u8_ptr = (u8 *) &align_buffer;
- from_u8_ptr = (u8 *) from_u16_ptr;
+ to_u8_ptr = (u8 *)&align_buffer;
+ from_u8_ptr = (u8 *)from_u16_ptr;

/* Output the remaining data */
for (; length > 0; length--)
@@ -273,7 +273,7 @@ static void xemaclite_aligned_read(u32 *src_ptr, u8 *dest_ptr,
u32 align_buffer;

from_u32_ptr = src_ptr;
- to_u16_ptr = (u16 *) dest_ptr;
+ to_u16_ptr = (u16 *)dest_ptr;

for (; length > 3; length -= 4) {
/* Copy each word into the temporary buffer */
@@ -289,9 +289,9 @@ static void xemaclite_aligned_read(u32 *src_ptr, u8 *dest_ptr,
u8 *to_u8_ptr, *from_u8_ptr;

/* Set up to read the remaining data */
- to_u8_ptr = (u8 *) to_u16_ptr;
+ to_u8_ptr = (u8 *)to_u16_ptr;
align_buffer = *from_u32_ptr++;
- from_u8_ptr = (u8 *) &align_buffer;
+ from_u8_ptr = (u8 *)&align_buffer;

/* Read the remaining data */
for (; length > 0; length--)
@@ -351,7 +351,7 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
return -1; /* Buffer was full, return failure */

/* Write the frame to the buffer */
- xemaclite_aligned_write(data, (u32 __force *) addr, byte_count);
+ xemaclite_aligned_write(data, (u32 __force *)addr, byte_count);

xemaclite_writel((byte_count & XEL_TPLR_LENGTH_MASK),
addr + XEL_TPLR_OFFSET);
@@ -448,7 +448,7 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen)
length = maxlen;

/* Read from the EmacLite device */
- xemaclite_aligned_read((u32 __force *) (addr + XEL_RXBUFF_OFFSET),
+ xemaclite_aligned_read((u32 __force *)(addr + XEL_RXBUFF_OFFSET),
data, length);

/* Acknowledge the frame */
@@ -479,7 +479,7 @@ static void xemaclite_update_address(struct net_local *drvdata,
/* Determine the expected Tx buffer address */
addr = drvdata->base_addr + drvdata->next_tx_buf_to_use;

- xemaclite_aligned_write(address_ptr, (u32 __force *) addr, ETH_ALEN);
+ xemaclite_aligned_write(address_ptr, (u32 __force *)addr, ETH_ALEN);

xemaclite_writel(ETH_ALEN, addr + XEL_TPLR_OFFSET);

@@ -572,10 +572,11 @@ static void xemaclite_tx_handler(struct net_device *dev)
struct net_local *lp = netdev_priv(dev);

dev->stats.tx_packets++;
+
if (!lp->deferred_skb)
return;

- if (xemaclite_send_data(lp, (u8 *) lp->deferred_skb->data,
+ if (xemaclite_send_data(lp, (u8 *)lp->deferred_skb->data,
lp->deferred_skb->len))
return;

@@ -620,7 +621,7 @@ static void xemaclite_rx_handler(struct net_device *dev)

skb_reserve(skb, 2);

- len = xemaclite_recv_data(lp, (u8 *) skb->data, len);
+ len = xemaclite_recv_data(lp, (u8 *)skb->data, len);

if (!len) {
dev->stats.rx_errors++;
@@ -1033,7 +1034,7 @@ static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
new_skb = orig_skb;

spin_lock_irqsave(&lp->reset_lock, flags);
- if (xemaclite_send_data(lp, (u8 *) new_skb->data, len) != 0) {
+ if (xemaclite_send_data(lp, (u8 *)new_skb->data, len) != 0) {
/* If the Emaclite Tx buffer is busy, stop the Tx queue and
* defer the skb for transmission during the ISR, after the
* current transmission is complete
--
1.7.1