Re: [PATCH 3/4] PCI: mediatek: Add system pm support for MT2712 and MT7622

From: Andy Shevchenko
Date: Wed Jun 27 2018 - 12:45:43 EST


On Wed, Jun 27, 2018 at 12:21 PM, <honghui.zhang@xxxxxxxxxxxx> wrote:
> From: Honghui Zhang <honghui.zhang@xxxxxxxxxxxx>
>
> The MTCMOS of PCIe Host for MT2712 and MT7622 will be off when system
> suspend, and all the internal control register will be reset after system
> resume. The PCIe link should be re-established and the related control
> register values should be re-set after system resume.

> struct mtk_pcie_soc {
> bool need_fix_class_id;

> + bool pm_support;

Hmm... Do you really need this flag? Can't runtime PM API tell you this?

> struct pci_ops *ops;
> int (*startup)(struct mtk_pcie_port *port);
> int (*setup_irq)(struct mtk_pcie_port *port, struct device_node *node);
> @@ -1195,12 +1197,76 @@ static int mtk_pcie_probe(struct platform_device *pdev)
> return err;
> }
>
> +#ifdef CONFIG_PM_SLEEP
> +static int mtk_pcie_suspend_noirq(struct device *dev)

Perhaps __maybe_unused?

> +{
> + struct mtk_pcie *pcie = dev_get_drvdata(dev);
> + const struct mtk_pcie_soc *soc = pcie->soc;
> + struct mtk_pcie_port *port;
> +
> + if (!soc->pm_support)
> + return 0;
> +

> + if (list_empty(&pcie->ports))
> + return 0;

So, if the list is empty you are not suspending for the host?


> +
> + list_for_each_entry(port, &pcie->ports, list) {
> + clk_disable_unprepare(port->pipe_ck);
> + clk_disable_unprepare(port->obff_ck);
> + clk_disable_unprepare(port->axi_ck);
> + clk_disable_unprepare(port->aux_ck);
> + clk_disable_unprepare(port->ahb_ck);
> + clk_disable_unprepare(port->sys_ck);
> + phy_power_off(port->phy);
> + phy_exit(port->phy);
> + }
> +
> + mtk_pcie_subsys_powerdown(pcie);
> +
> + return 0;
> +}
> +
> +static int mtk_pcie_resume_noirq(struct device *dev)
> +{
> + struct mtk_pcie *pcie = dev_get_drvdata(dev);
> + const struct mtk_pcie_soc *soc = pcie->soc;
> + struct mtk_pcie_port *port;
> +
> + if (!soc->pm_support)
> + return 0;
> +

> + if (list_empty(&pcie->ports))
> + return 0;

No runtime PM for this case?
(It seems now I understand why in previous patch you have a similar check)

> +
> + if (dev->pm_domain) {
> + pm_runtime_enable(dev);
> + pm_runtime_get_sync(dev);
> + }
> +
> + clk_prepare_enable(pcie->free_ck);
> +
> + list_for_each_entry(port, &pcie->ports, list)
> + mtk_pcie_enable_port(port);
> +

> + if (list_empty(&pcie->ports))

Hmm... How it would be true if you already bailed out above on the
same condition?

> + mtk_pcie_subsys_powerdown(pcie);
> +
> + return 0;
> +}
> +#endif
> +
> +static const struct dev_pm_ops mtk_pcie_pm_ops = {
> + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mtk_pcie_suspend_noirq,
> + mtk_pcie_resume_noirq)
> +};
> +
> static const struct mtk_pcie_soc mtk_pcie_soc_v1 = {
> .ops = &mtk_pcie_ops,
> .startup = mtk_pcie_startup_port,
> };
>
> static const struct mtk_pcie_soc mtk_pcie_soc_mt2712 = {
> + .pm_support = true,
> .ops = &mtk_pcie_ops_v2,
> .startup = mtk_pcie_startup_port_v2,
> .setup_irq = mtk_pcie_setup_irq,

No update for .pm ?

> @@ -1208,6 +1274,7 @@ static const struct mtk_pcie_soc mtk_pcie_soc_mt2712 = {
>
> static const struct mtk_pcie_soc mtk_pcie_soc_mt7622 = {
> .need_fix_class_id = true,
> + .pm_support = true,
> .ops = &mtk_pcie_ops_v2,
> .startup = mtk_pcie_startup_port_v2,
> .setup_irq = mtk_pcie_setup_irq,
> @@ -1227,6 +1294,7 @@ static struct platform_driver mtk_pcie_driver = {
> .name = "mtk-pcie",
> .of_match_table = mtk_pcie_ids,
> .suppress_bind_attrs = true,
> + .pm = &mtk_pcie_pm_ops,
> },
> };
> builtin_platform_driver(mtk_pcie_driver);
> --
> 2.6.4
>



--
With Best Regards,
Andy Shevchenko