Re: [PATCH tip/core/rcu 16/27] rcu: Add comment documenting how rcu_seq_snap works

From: Paul E. McKenney
Date: Tue Jun 26 2018 - 14:08:31 EST


On Tue, Jun 26, 2018 at 07:30:55PM +0200, Peter Zijlstra wrote:
> On Mon, Jun 25, 2018 at 05:35:02PM -0700, Paul E. McKenney wrote:
> > +/*
> > + * rcu_seq_snap - Take a snapshot of the update side's sequence number.
> > + *
> > + * This function returns the earliest value of the grace-period sequence number
> > + * that will indicate that a full grace period has elapsed since the current
> > + * time. Once the grace-period sequence number has reached this value, it will
> > + * be safe to invoke all callbacks that have been registered prior to the
> > + * current time. This value is the current grace-period number plus two to the
> > + * power of the number of low-order bits reserved for state, then rounded up to
> > + * the next value in which the state bits are all zero.
>
> If you complete that by saying _why_ you need to round up there, then
> the below verbiage is completely redundant.

I will leave this between you, Joel, and whoever else is interested.
The initial state worked for me. ;-)

> > + * In the current design, RCU_SEQ_STATE_MASK=3 and the least significant bit of
> > + * the seq is used to track if a GP is in progress or not. Given this, it is
> > + * sufficient if we add (6+1) and mask with ~3 to get the next GP. Let's see
> > + * why with an example:
> > + *
> > + * Say the current seq is 12 which is 0b1100 (GP is 3 and state bits are 0b00).
> > + * To get to the next GP number of 4, we have to add 0b100 to this (0x1 << 2)
> > + * to account for the shift due to 2 state bits. Now, if the current seq is
> > + * 13 (GP is 3 and state bits are 0b01), then it means the current grace period
> > + * is already in progress so the next GP that a future call back will be queued
> > + * to run at is GP+2 = 5, not 4. To account for the extra +1, we just overflow
> > + * the 2 lower bits by adding 0b11. In case the lower bit was set, the overflow
> > + * will cause the extra +1 to the GP, along with the usual +1 explained before.
> > + * This gives us GP+2. Finally we mask the lower to bits by ~0x3 in case the
> > + * overflow didn't occur. This masking is needed because in case RCU was idle
> > + * (no GP in progress so lower 2 bits are 0b00), then the overflow of the lower
> > + * 2 state bits wouldn't occur, so we mask to zero out those lower 2 bits.
> > + *
> > + * In other words, the next seq can be obtained by (0b11 + 0b100) & (~0b11)
> > + * which can be generalized to:
> > + * seq + (RCU_SEQ_STATE_MASK + (RCU_SEQ_STATE_MASK + 1)) & (~RCU_SEQ_STATE_MASK)
> > + */
>
> Is the below not much simpler:
>
> > static inline unsigned long rcu_seq_snap(unsigned long *sp)
> > {
> > unsigned long s;
>
> s = smp_load_aquire(sp);
>
> /* Add one GP */
> s += 1 << RCU_SEQ_CTR_SHIFT;
>
> /* Complete any pending state by rounding up */
> s = __ALIGN_MASK(s, RCU_SEQ_STATE_MASK);
>
> return s;
> }

Seems equivalent to me, but with more lines. To say nothing of more
levels of lookup of macro definitions. ;-)

Thanx, Paul