Re: [PATCH 0/3] Add STM32 SPI support on stm32mp157c

[Alexandre Torgue]

Hi AmÃlie,

On 05/17/2018 04:21 PM, Amelie Delaunay wrote:
> This patch adds STM32 SPI support on stm32mp157c SoC.
> SPI1, available on GPIO expansion connector, is kept disabled, so these
> pins can be used as GPIOs by default.
>
> Amelie Delaunay (3):
>    ARM: dts: stm32: add STM32 SPI support on stm32mp157c
>    ARM: dts: stm32: add SPI1 support on stm32mp157c-ev1
>    ARM: multi_v7_defconfig: enable STM32 SPI
>
>   arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 16 +++++-
>   arch/arm/boot/dts/stm32mp157c-ev1.dts     |  6 +++
>   arch/arm/boot/dts/stm32mp157c.dtsi        | 84 +++++++++++++++++++++++++++++++
>   arch/arm/configs/multi_v7_defconfig       |  1 +
>   4 files changed, 106 insertions(+), 1 deletion(-)

DT patches applied on stm32-next.

Thanks
Alex