[PATCH v2 07/13] ARM: davinci: da850-evm: use aemif platform driver in legacy mode

From: Bartosz Golaszewski
Date: Tue Jun 26 2018 - 05:26:39 EST


From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>

We now support board files in the aemif driver. Register a platform
device instead of using the handcrafted API in da850-evm.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
---
arch/arm/mach-davinci/board-da850-evm.c | 93 ++++++++++++++-----------
1 file changed, 51 insertions(+), 42 deletions(-)

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 442c16773f09..ace66f368f8d 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -33,6 +33,7 @@
#include <linux/platform_data/gpio-davinci.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/ti-aemif.h>
#include <linux/platform_data/spi-davinci.h>
#include <linux/platform_data/uio_pruss.h>
#include <linux/regulator/machine.h>
@@ -185,16 +186,6 @@ static struct resource da850_evm_norflash_resource[] = {
},
};

-static struct platform_device da850_evm_norflash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &da850_evm_norflash_data,
- },
- .num_resources = 1,
- .resource = da850_evm_norflash_resource,
-};
-
/* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
* (128K blocks). It may be used instead of the (default) SPI flash
* to boot, using TI's tools to install the secondary boot loader
@@ -266,37 +257,58 @@ static struct resource da850_evm_nandflash_resource[] = {
},
};

-static struct platform_device da850_evm_nandflash_device = {
- .name = "davinci_nand",
- .id = 1,
- .dev = {
- .platform_data = &da850_evm_nandflash_data,
- },
- .num_resources = ARRAY_SIZE(da850_evm_nandflash_resource),
- .resource = da850_evm_nandflash_resource,
+static struct resource da850_evm_aemif_resource[] = {
+ {
+ .start = DA8XX_AEMIF_CTL_BASE,
+ .end = DA8XX_AEMIF_CTL_BASE + SZ_32K,
+ .flags = IORESOURCE_MEM,
+ }
};

-static struct platform_device *da850_evm_devices[] = {
- &da850_evm_nandflash_device,
- &da850_evm_norflash_device,
+static struct aemif_abus_data da850_evm_aemif_abus_data[] = {
+ {
+ .cs = 3,
+ }
};

-#define DA8XX_AEMIF_CE2CFG_OFFSET 0x10
-#define DA8XX_AEMIF_ASIZE_16BIT 0x1
-
-static void __init da850_evm_init_nor(void)
-{
- void __iomem *aemif_addr;
-
- aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
+static struct platform_device da850_evm_aemif_devices[] = {
+ {
+ .name = "davinci_nand",
+ .id = 1,
+ .dev = {
+ .platform_data = &da850_evm_nandflash_data,
+ },
+ .num_resources = ARRAY_SIZE(da850_evm_nandflash_resource),
+ .resource = da850_evm_nandflash_resource,
+ },
+ {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &da850_evm_norflash_data,
+ },
+ .num_resources = 1,
+ .resource = da850_evm_norflash_resource,
+ }
+};

- /* Configure data bus width of CS2 to 16 bit */
- writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
- DA8XX_AEMIF_ASIZE_16BIT,
- aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
+static struct aemif_platform_data da850_evm_aemif_pdata = {
+ .cs_offset = 2,
+ .abus_data = da850_evm_aemif_abus_data,
+ .num_abus_data = ARRAY_SIZE(da850_evm_aemif_abus_data),
+ .sub_devices = da850_evm_aemif_devices,
+ .num_sub_devices = ARRAY_SIZE(da850_evm_aemif_devices),
+};

- iounmap(aemif_addr);
-}
+static struct platform_device da850_evm_aemif_device = {
+ .name = "ti-aemif",
+ .id = -1,
+ .dev = {
+ .platform_data = &da850_evm_aemif_pdata,
+ },
+ .resource = da850_evm_aemif_resource,
+ .num_resources = ARRAY_SIZE(da850_evm_aemif_resource),
+};

static const short da850_evm_nand_pins[] = {
DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3,
@@ -339,13 +351,10 @@ static inline void da850_evm_setup_nor_nand(void)
pr_warn("%s: NOR mux setup failed: %d\n",
__func__, ret);

- da850_evm_init_nor();
-
- platform_add_devices(da850_evm_devices,
- ARRAY_SIZE(da850_evm_devices));
-
- if (davinci_aemif_setup(&da850_evm_nandflash_device))
- pr_warn("%s: Cannot configure AEMIF.\n", __func__);
+ ret = platform_device_register(&da850_evm_aemif_device);
+ if (ret)
+ pr_warn("%s: registering aemif failed: %d\n",
+ __func__, ret);
}
}

--
2.17.1