RE: [PATCH V2 2/2] ARM: dts: imx6ul: add GPIO clocks

From: Anson Huang
Date: Sun Jun 24 2018 - 23:14:56 EST


Gentle Ping...

Anson Huang
Best Regards!


> -----Original Message-----
> From: Anson Huang
> Sent: Sunday, June 3, 2018 9:44 AM
> To: shawnguo@xxxxxxxxxx; kernel@xxxxxxxxxxxxxx; Fabio Estevam
> <fabio.estevam@xxxxxxx>; robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx;
> mturquette@xxxxxxxxxxxx; sboyd@xxxxxxxxxx;
> michael@xxxxxxxxxxxxxxxxxxxx; matteo.lisi@xxxxxxxxxxx
> Cc: dl-linux-imx <linux-imx@xxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> linux-clk@xxxxxxxxxxxxxxx
> Subject: [PATCH V2 2/2] ARM: dts: imx6ul: add GPIO clocks
>
> i.MX6UL has GPIO clock gates in CCM CCGR, add clock property for GPIO driver
> to make sure all GPIO banks work as expected.
>
> Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> ---
> no changes since V1.
> arch/arm/boot/dts/imx6ul.dtsi | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
> index 1241972..405e068 100644
> --- a/arch/arm/boot/dts/imx6ul.dtsi
> +++ b/arch/arm/boot/dts/imx6ul.dtsi
> @@ -437,6 +437,7 @@
> reg = <0x0209c000 0x4000>;
> interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6UL_CLK_GPIO1>;
> gpio-controller;
> #gpio-cells = <2>;
> interrupt-controller;
> @@ -450,6 +451,7 @@
> reg = <0x020a0000 0x4000>;
> interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6UL_CLK_GPIO2>;
> gpio-controller;
> #gpio-cells = <2>;
> interrupt-controller;
> @@ -462,6 +464,7 @@
> reg = <0x020a4000 0x4000>;
> interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6UL_CLK_GPIO3>;
> gpio-controller;
> #gpio-cells = <2>;
> interrupt-controller;
> @@ -474,6 +477,7 @@
> reg = <0x020a8000 0x4000>;
> interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6UL_CLK_GPIO4>;
> gpio-controller;
> #gpio-cells = <2>;
> interrupt-controller;
> @@ -486,6 +490,7 @@
> reg = <0x020ac000 0x4000>;
> interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6UL_CLK_GPIO5>;
> gpio-controller;
> #gpio-cells = <2>;
> interrupt-controller;
> --
> 2.7.4