Re: [PATCH 1/3] iio: hx711: add data-ready-delay-ns property in DT

[Jonathan Cameron]

On Sat, 23 Jun 2018 20:54:21 +0200
Andreas Klinger <ak@xxxxxxxxxxxxx> wrote:

> add data-ready-delay-ns property for hx711 ADC
> this is the delay after rising PD_SCK until DOUT is read and assumed to be
> ready
> 
> Signed-off-by: Andreas Klinger <ak@xxxxxxxxxxxxx>

One unconnected change.  I'm not sure it's wrong as such but it should not
be in this patch.

> ---
>  Documentation/devicetree/bindings/iio/adc/avia-hx711.txt | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt b/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
> index b3629405f568..8c9bcaa4d750 100644
> --- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
> +++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
> @@ -8,11 +8,18 @@ Required properties:
>  		See Documentation/devicetree/bindings/gpio/gpio.txt
>   - avdd-supply:	Definition of the regulator used as analog supply
>  
> +Optional properties:
> + - data-ready-delay-ns:	additional delay in nanoseconds between rising of
> +			PD_SCK until DOUT is ready
> +			should be less then maximum PD_SCK high time which
> +			is 50000 in the datasheet
> +
>  Example:
> -weight@0 {
> +weight {

Change has nothing to do with this patch...

>  	compatible = "avia,hx711";
>  	sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
>  	dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
>  	avdd-suppy = <&avdd>;
> +	data-ready-delay-ns = <1000>;
>  };
>