[PATCH v2 4/8] staging: rtl8192u: Truncate block comments to 80 character length - Style

From: John Whitmore
Date: Sun Jun 24 2018 - 05:59:38 EST


Where possible truncation of block comments to the 80 character length
preferred by the coding style.

In a previous version of this commit some of the comments were contentious so
those have not been touched in this version.

Signed-off-by: John Whitmore <johnfwhitmore@xxxxxxxxx>
---
.../rtl8192u/ieee80211/rtl819x_HTProc.c | 108 +++++++++++-------
1 file changed, 64 insertions(+), 44 deletions(-)

diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index bbac9d04c23e..604b393d856f 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -1,6 +1,9 @@
// SPDX-License-Identifier: GPL-2.0

-//As this function is mainly ported from Windows driver, so leave the name little changed. If any confusion caused, tell me. Created by WB. 2008.05.08
+/*
+ * As this function is mainly ported from Windows driver, so leave the name
+ * little changed. If any confusion caused, tell me. Created by WB. 2008.05.08
+ */
#include "ieee80211.h"
#include "rtl819x_HT.h"
u8 MCS_FILTER_ALL[16] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
@@ -42,8 +45,8 @@ static u8 AIRLINK_RALINK[3] = {0x00, 0x18, 0x02};
//static u8 DLINK_ATHEROS[3] = {0x00, 0x1c, 0xf0};
static u8 CISCO_BROADCOM[3] = {0x00, 0x17, 0x94};
/*
- * 2008/04/01 MH For Cisco G mode RX TP We need to change FW duration. Should we put the
- * code in other place??
+ * 2008/04/01 MH For Cisco G mode RX TP We need to change FW duration. Should we
+ * put the code in other place??
* static u8 WIFI_CISCO_G_AP[3] = {0x00, 0x40, 0x96};
*/
/*
@@ -117,7 +120,8 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
}

/*
- *function: This function print out each field on HT capability IE mainly from (Beacon/ProbeRsp/AssocReq)
+ *function: This function print out each field on HT capability
+ * IE mainly from (Beacon/ProbeRsp/AssocReq)
* input: u8* CapIE //Capability IE to be printed out
* u8* TitleString //mainly print out caller function
* output: none
@@ -151,7 +155,8 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString)
}

/*
- *function: This function print out each field on HT Information IE mainly from (Beacon/ProbeRsp)
+ *function: This function print out each field on HT Information
+ * IE mainly from (Beacon/ProbeRsp)
* input: u8* InfoIE //Capability IE to be printed out
* u8* TitleString //mainly print out caller function
* output: none
@@ -387,8 +392,9 @@ static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
}

/*
- *function: Check whether driver should declare received rate up to MCS13 only since some chipset is not good
- * at receiving MCS14~15 frame from some AP.
+ *function: Check whether driver should declare received rate up to MCS13
+ * only since some chipset is not good at receiving MCS14~15 frame
+ * from some AP.
* input: struct ieee80211_device* ieee
* u8 * PeerMacAddr
* output: none
@@ -402,7 +408,8 @@ static u8 HTIOTActIsDisableMCS14(struct ieee80211_device *ieee, u8 *PeerMacAddr)
/*
* Function: HTIOTActIsDisableMCS15
*
- * Overview: Check whether driver should declare capability of receiving MCS15
+ * Overview: Check whether driver should declare capability of receiving
+ * MCS15
*
* Input:
* PADAPTER Adapter,
@@ -439,7 +446,8 @@ static bool HTIOTActIsDisableMCS15(struct ieee80211_device *ieee)
/*
* Function: HTIOTActIsDisableMCSTwoSpatialStream
*
- * Overview: Check whether driver should declare capability of receiving All 2 ss packets
+ * Overview: Check whether driver should declare capability of receiving
+ * All 2 ss packets
*
* Input:
* PADAPTER Adapter,
@@ -462,7 +470,8 @@ static bool HTIOTActIsDisableMCSTwoSpatialStream(struct ieee80211_device *ieee,
* input: struct ieee80211_device* ieee
* u8* PeerMacAddr
* output: none
- * return: return 1 if driver should disable EDCA turbo mode(otherwise return 0)
+ * return: return 1 if driver should disable EDCA turbo mode
+ * (otherwise return 0)
*/
static u8 HTIOTActIsDisableEDCATurbo(struct ieee80211_device *ieee,
u8 *PeerMacAddr)
@@ -471,7 +480,8 @@ static u8 HTIOTActIsDisableEDCATurbo(struct ieee80211_device *ieee,
}

/*
- *function: Check whether we need to use OFDM to sned MGNT frame for broadcom AP
+ *function: Check whether we need to use OFDM to sned MGNT frame for
+ * broadcom AP
* input: struct ieee80211_network *network //current network we live
* output: none
* return: return 1 if true
@@ -510,9 +520,9 @@ void HTResetIOTSetting(PRT_HIGH_THROUGHPUT pHTInfo)
/*
*function: Construct Capablility Element in Beacon... if HTEnable is turned on
* input: struct ieee80211_device* ieee
- * u8* posHTCap //pointer to store Capability Ele
- * u8* len //store length of CE
- * u8 IsEncrypt //whether encrypt, needed further
+ * u8* posHTCap //pointer to store Capability Ele
+ * u8* len //store length of CE
+ * u8 IsEncrypt //whether encrypt, needed further
* output: none
* return: none
* notice: posHTCap can't be null and should be initialized before.
@@ -551,7 +561,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
pCapELE->ShortGI20Mhz = 1; // We can receive Short GI!!
pCapELE->ShortGI40Mhz = 1; // We can receive Short GI!!
//DbgPrint("TX HT cap/info ele BW=%d SG20=%d SG40=%d\n\r",
- //pCapELE->ChlWidth, pCapELE->ShortGI20Mhz, pCapELE->ShortGI40Mhz);
+ //pCapELE->ChlWidth, pCapELE->ShortGI20Mhz, pCapELE->ShortGI40Mhz);
pCapELE->TxSTBC = 1;
pCapELE->RxSTBC = 0;
pCapELE->DelayBA = 0; // Do not support now!!
@@ -612,19 +622,23 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u

// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_HT, posHTCap, *len -2);

- //Print each field in detail. Driver should not print out this message by default
+ /*
+ * Print each field in detail. Driver should not print out this message
+ * by default
+ */
// HTDebugHTCapability(posHTCap, (u8*)"HTConstructCapability()");
}

/*
- *function: Construct Information Element in Beacon... if HTEnable is turned on
+ *function: Construct Information Element in Beacon... if HTEnable is turned on
* input: struct ieee80211_device* ieee
- * u8* posHTCap //pointer to store Information Ele
- * u8* len //store len of
- * u8 IsEncrypt //whether encrypt, needed further
+ * u8* posHTCap //pointer to store Information Ele
+ * u8* len //store len of
+ * u8 IsEncrypt //whether encrypt, needed further
* output: none
* return: none
- * notice: posHTCap can't be null and be initialized before. only AP and IBSS sta should do this
+ * notice: posHTCap can't be null and be initialized before.
+ * only AP and IBSS sta should do this
*/
void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *len, u8 IsEncrypt)
{
@@ -666,16 +680,17 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
}

/*
- * According to experiment, Realtek AP to STA (based on rtl8190) may achieve best performance
- * if both STA and AP set limitation of aggregation size to 32K, that is, set AMPDU density to 2
- * (Ref: IEEE 11n specification). However, if Realtek STA associates to other AP, STA should set
- * limitation of aggregation size to 8K, otherwise, performance of traffic stream from STA to AP
- * will be much less than the traffic stream from AP to STA if both of the stream runs concurrently
- * at the same time.
+ * According to experiment, Realtek AP to STA (based on rtl8190) may achieve
+ * best performance if both STA and AP set limitation of aggregation size to
+ * 32K, that is, set AMPDU density to 2 (Ref: IEEE 11n specification).
+ * However, if Realtek STA associates to other AP, STA should set limitation of
+ * aggregation size to 8K, otherwise, performance of traffic stream from STA to
+ * AP will be much less than the traffic stream from AP to STA if both of the
+ * stream runs concurrently at the same time.
*
* Frame Format
- * Element ID Length OUI Type1 Reserved
- * 1 byte 1 byte 3 bytes 1 byte 1 byte
+ * Element ID Length OUI Type1 Reserved
+ * 1 byte 1 byte 3 bytes 1 byte 1 byte
*
* OUI = 0x00, 0xe0, 0x4c,
* Type = 0x02
@@ -686,8 +701,8 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
/*
*function: Construct Information Element in Beacon... in RT2RT condition
* input: struct ieee80211_device* ieee
- * u8* posRT2RTAgg //pointer to store Information Ele
- * u8* len //store len
+ * u8* posRT2RTAgg //pointer to store Information Ele
+ * u8* len //store len
* output: none
* return: none
* notice:
@@ -735,8 +750,8 @@ void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,

/*
*function: Pick the right Rate Adaptive table to use
- * input: struct ieee80211_device* ieee
- * u8* pOperateMCS //A pointer to MCS rate bitmap
+ * input: struct ieee80211_device* ieee
+ * u8* pOperateMCS //A pointer to MCS rate bitmap
* return: always we return true
* notice:
*/
@@ -853,8 +868,9 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
// TODO: adjust our operational rate set according to our channel bandwidth, STBC and Antenna number

/*
- * TODO: fill suggested rate adaptive rate index and give firmware info using Tx command packet
- * we also shall suggested the first start rate set according to our singal strength
+ * TODO: fill suggested rate adaptive rate index and give firmware info
+ * using Tx command packet we also shall suggested the first start rate
+ * set according to our singal strength
*/
HT_PickMCSRate(ieee, pOperateMCS);

@@ -1013,7 +1029,8 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
/*
* Filter out unsupported HT rate for this AP
* Update RATR table
- * This is only for 8190 ,8192 or later product which using firmware to handle rate adaptive mechanism.
+ * This is only for 8190 ,8192 or later product which using firmware to
+ * handle rate adaptive mechanism.
*/

/*
@@ -1050,7 +1067,9 @@ void HTSetConnectBwModeCallback(struct ieee80211_device *ieee);
* input: struct ieee80211_device* ieee
* output: none
* return: none
- * notice: This function is called when * (1) MPInitialization Phase * (2) Receiving of Deauthentication from AP
+ * notice: This function is called when
+ * * (1) MPInitialization Phase
+ * * (2) Receiving of Deauthentication from AP
*/
// TODO: Should this funciton be called when receiving of Disassociation?
void HTInitializeHTInfo(struct ieee80211_device *ieee)
@@ -1075,8 +1094,8 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
/*
* CCK rate support
* This flag is set to true to support CCK rate by default.
- * It will be affected by "pHTInfo->bRegSuppCCK" and AP capabilities only when associate to
- * 11N BSS.
+ * It will be affected by "pHTInfo->bRegSuppCCK" and AP capabilities
+ * only when associate to 11N BSS.
*/
pHTInfo->bCurSuppCCK = true;

@@ -1140,7 +1159,8 @@ void HTInitializeBssDesc(PBSS_HT pBssHT)
/*
*function: initialize Bss HT structure(struct PBSS_HT)
* input: struct ieee80211_device *ieee
- * struct ieee80211_network *pNetwork //usually current network we are live in
+ * struct ieee80211_network *pNetwork //usually current network
+ * we are live in
* output: none
* return: none
* notice: This function should ONLY be called before association
@@ -1300,10 +1320,10 @@ void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH Bandwidt
pHTInfo->bSwBwInProgress = true;

/*
- * TODO: 2007.7.13 by Emily Wait 2000ms in order to guarantee that switching
- * bandwidth is executed after scan is finished. It is a temporal solution
- * because software should ganrantee the last operation of switching bandwidth
- * is executed properlly.
+ * TODO: 2007.7.13 by Emily Wait 2000ms in order to guarantee that
+ * switching bandwidth is executed after scan is finished. It is a
+ * temporal solution because software should ganrantee the last
+ * operation of switching bandwidth is executed properlly.
*/
HTSetConnectBwModeCallback(ieee);

--
2.17.1