[PATCH v3 0/2] hwmon: Add NPCM7xx PWM and Fan driver support

From: Tomer Maimon
Date: Thu Jun 21 2018 - 18:11:54 EST


This patch set adds Pulse Width Modulation (PWM) and Fan tacho
support for the Nuvoton NPCM7xx Baseboard Management Controller (BMC).

The Nuvoton BMC NPCM7xx has two identical PWM controller modules,
each module has four PWM controller outputs and eight identical Fan
controller modules, each module has two Fan controller inputs.

The hwmon driver provides sysfs entries through which the user can
configure and get the duty cycle between 0 (disable the specific PWM)
to 255 of particular PWM output port.

The driver support cooling device creation, that could be bound
to a thermal zone for the thermal control.

The NPCM7xx PWM and Fan driver tested on NPCM750 evaluation board.

Addressed comments from:.
- Guenter Roeck: https://www.spinics.net/lists/kernel/msg2834515.html
https://www.spinics.net/lists/kernel/msg2835363.html

Changes since version 2:
- Adding hwmon documentation
- Using dev_function instead pr_function
- Removing all typecast
- Removing unused definitions
- Adding () in macros parameters.
- dt-binding documentation haven't changed

Changes since version 1:
- Rename driver name
- Adding Fan Controller support
- Adding cooling device support
- Modifying dt-binding documentation for Fan and cooling binding

Tomer Maimon (2):
dt-binding: hwmon: Add NPCM7xx PWM and Fan controller documentation
hwmon: npcm750: add NPCM7xx PWM and Fan driver

.../devicetree/bindings/hwmon/npcm750-pwm-fan.txt | 84 ++
Documentation/hwmon/npcm750-pwm-fan | 22 +
drivers/hwmon/Kconfig | 7 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/npcm750-pwm-fan.c | 1073 ++++++++++++++++++++
5 files changed, 1187 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt
create mode 100644 Documentation/hwmon/npcm750-pwm-fan
create mode 100644 drivers/hwmon/npcm750-pwm-fan.c

--
2.14.1