[PATCH 1/3] ARM: dts: imx51-zii-common: create common include dtsi

From: Andrey Gusakov
Date: Thu Jun 21 2018 - 13:42:35 EST

Make shared include file. Move common stuff from rdu1 dts file to
dtsi for future reuse by other imx51 based boards from ZII.

Signed-off-by: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/imx51-zii-common.dtsi | 317 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/imx51-zii-rdu1.dts | 330 +++-----------------------------
2 files changed, 347 insertions(+), 300 deletions(-)
create mode 100644 arch/arm/boot/dts/imx51-zii-common.dtsi

diff --git a/arch/arm/boot/dts/imx51-zii-common.dtsi b/arch/arm/boot/dts/imx51-zii-common.dtsi
new file mode 100644
index 0000000..b0f0643
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-zii-common.dtsi
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) 2018 Zodiac Inflight Innovations
+
+#include "imx51.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ /* Will be filled by the bootloader */
+ memory@90000000 {
+ reg = <0x90000000 0>;
+ };
+
+ i2c_gpio: i2c-gpio {
+ compatible = "i2c-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_swi2c>;
+ i2c-gpio,delay-us = <50>;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&cpu {
+ cpu-supply = <&sw1_reg>;
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+ <&gpio4 25 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ pmic@0 {
+ compatible = "fsl,mc13892";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ spi-max-frequency = <6000000>;
+ spi-cs-high;
+ reg = <0>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,mc13xxx-uses-adc;
+
+ regulators {
+ sw1_reg: sw1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: sw3 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vpll_reg: vpll {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdig_reg: vdig {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ };
+
+ vsd_reg: vsd {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3150000>;
+ };
+
+ vusb_reg: vusb {
+ regulator-always-on;
+ };
+
+ vusb2_reg: vusb2 {
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vvideo_reg: vvideo {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ };
+
+ vaudio_reg: vaudio {
+ regulator-min-microvolt = <2300000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vcam_reg: vcam {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-always-on;
+ };
+ };
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ led-control = <0x0 0x0 0x3f83f8 0x0>;
+
+ sysled3: led3@3 {
+ reg = <3>;
+ label = "system:red:power";
+ linux,default-trigger = "default-on";
+ };
+
+ sysled4: led4@4 {
+ reg = <4>;
+ label = "system:green:act";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+ };
+
+ flash@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+ };
+};
+
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
+ <&gpio3 28 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&esdhc1 {
+ non-removable;
+ no-1-8-v;
+ no-sdio;
+ no-sd;
+ status = "okay";
+};
+
+&esdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc4>;
+ bus-width = <4>;
+ no-1-8-v;
+ no-sdio;
+ cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "mii";
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c04";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "host";
+ disable-over-current;
+ phy_type = "utmi_wide";
+ vbus-supply = <&usb_vbus>;
+ status = "okay";
+};
+
+&usbphy0 {
+ vcc-supply = <&vusb2_reg>;
+};
+
+&iomuxc {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
+ MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
+ MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
+ MX51_PAD_CSPI1_SS0__GPIO4_24 0x85
+ MX51_PAD_CSPI1_SS1__GPIO4_25 0x85
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185
+ MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185
+ MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185
+ MX51_PAD_NANDF_RDY_INT__GPIO3_24 0x85
+ MX51_PAD_NANDF_D12__GPIO3_28 0x85
+ >;
+ };
+
+ pinctrl_esdhc1_4bit: esdhc1grp_4bit {
+ fsl,pins = <
+ MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
+ MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
+ MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
+ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
+ MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
+ MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
+ >;
+ };
+
+ pinctrl_esdhc1_8bit: esdhc1grp_8bit {
+ fsl,pins = <
+ MX51_PAD_SD2_DATA0__SD1_DAT4 0x20d5
+ MX51_PAD_SD2_DATA1__SD1_DAT5 0x20d5
+ MX51_PAD_SD2_DATA2__SD1_DAT6 0x20d5
+ MX51_PAD_SD2_DATA3__SD1_DAT7 0x20d5
+ >;
+ };
+
+ pinctrl_esdhc4: esdhc4grp {
+ fsl,pins = <
+ MX51_PAD_NANDF_RB1__SD4_CMD 0x400020d5
+ MX51_PAD_NANDF_CS2__SD4_CLK 0x20d5
+ MX51_PAD_NANDF_CS3__SD4_DAT0 0x20d5
+ MX51_PAD_NANDF_CS4__SD4_DAT1 0x20d5
+ MX51_PAD_NANDF_CS5__SD4_DAT2 0x20d5
+ MX51_PAD_NANDF_CS6__SD4_DAT3 0x20d5
+ MX51_PAD_NANDF_D0__GPIO4_8 0x100
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
+ MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX51_PAD_GPIO1_4__GPIO1_4 0x85
+ MX51_PAD_GPIO1_8__GPIO1_8 0xe5
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index df9eca9..59a80da 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -1,61 +1,14 @@
-/*
- * Copyright (C) 2017 Zodiac Inflight Innovations
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) 2018 Zodiac Inflight Innovations

/dts-v1/;
-#include "imx51.dtsi"
+#include "imx51-zii-common.dtsi"
#include <dt-bindings/sound/fsl-imx-audmux.h>

/ {
model = "ZII RDU1 Board";
compatible = "zii,imx51-rdu1", "fsl,imx51";

- chosen {
- stdout-path = &uart1;
- };
-
- /* Will be filled by the bootloader */
- memory@90000000 {
- reg = <0x90000000 0>;
- };
-
aliases {
mdio-gpio0 = &mdio_gpio;
rtc0 = &ds1341;
@@ -94,14 +47,6 @@
enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
};

- reg_5p0v_main: regulator-5p0v-main {
- compatible = "regulator-fixed";
- regulator-name = "5V_MAIN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3.3V";
@@ -150,28 +95,6 @@
};
};

- i2c_gpio: i2c-gpio {
- compatible = "i2c-gpio";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_swi2c>;
- gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>, /* sda */
- <&gpio3 4 GPIO_ACTIVE_HIGH>; /* scl */
- i2c-gpio,delay-us = <50>;
- status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- sgtl5000: codec@a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- clocks = <&clk_26M_snd>;
- VDDA-supply = <&vdig_reg>;
- VDDIO-supply = <&vvideo_reg>;
- #sound-dai-cells = <0>;
- };
- };
-
spi_gpio: spi-gpio {
compatible = "spi-gpio";
#address-cells = <1>;
@@ -315,178 +238,30 @@
};
};

-&cpu {
- cpu-supply = <&sw1_reg>;
+&usb_vbus {
+ regulator-always-on;
};

-&ecspi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1>;
- cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
- <&gpio4 25 GPIO_ACTIVE_LOW>;
- status = "okay";
-
- pmic@0 {
- compatible = "fsl,mc13892";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pmic>;
- spi-max-frequency = <6000000>;
- spi-cs-high;
- reg = <0>;
- interrupt-parent = <&gpio1>;
- interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
- fsl,mc13xxx-uses-adc;
-
- regulators {
- sw1_reg: sw1 {
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1375000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw2_reg: sw2 {
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1850000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw3_reg: sw3 {
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1850000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw4_reg: sw4 {
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1850000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vpll_reg: vpll {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vdig_reg: vdig {
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <1650000>;
- regulator-boot-on;
- };
-
- vsd_reg: vsd {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3150000>;
- };
-
- vusb_reg: vusb {
- regulator-always-on;
- };
-
- vusb2_reg: vusb2 {
- regulator-min-microvolt = <2400000>;
- regulator-max-microvolt = <2775000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vvideo_reg: vvideo {
- regulator-min-microvolt = <2775000>;
- regulator-max-microvolt = <2775000>;
- };
-
- vaudio_reg: vaudio {
- regulator-min-microvolt = <2300000>;
- regulator-max-microvolt = <3000000>;
- };
-
- vcam_reg: vcam {
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3000000>;
- };
-
- vgen1_reg: vgen1 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- vgen2_reg: vgen2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3150000>;
- regulator-always-on;
- };
-
- vgen3_reg: vgen3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2900000>;
- regulator-always-on;
- };
- };
-
- leds {
- #address-cells = <1>;
- #size-cells = <0>;
- led-control = <0x0 0x0 0x3f83f8 0x0>;
-
- sysled0@3 {
- reg = <3>;
- label = "system:green:status";
- linux,default-trigger = "default-on";
- };
-
- sysled1@4 {
- reg = <4>;
- label = "system:green:act";
- linux,default-trigger = "heartbeat";
- };
- };
- };
-
- flash@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "atmel,at45db642d", "atmel,at45", "atmel,dataflash";
- spi-max-frequency = <25000000>;
- reg = <1>;
- };
+&ecspi2 {
+ status = "disabled";
};

&esdhc1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1>;
+ pinctrl-0 = <&pinctrl_esdhc1_4bit>;
bus-width = <4>;
- no-1-8-v;
- non-removable;
- no-sdio;
- no-sd;
- status = "okay";
+};
+
+&esdhc4 {
+ status = "disabled";
};

&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec>;
- phy-mode = "mii";
phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
phy-supply = <&vgen3_reg>;
- status = "okay";
};

&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- status = "okay";
-
- eeprom@50 {
- compatible = "atmel,24c04";
- pagesize = <16>;
- reg = <0x50>;
- };
-
hpa1: amp@60 {
compatible = "ti,tpa6130a2";
reg = <0x60>;
@@ -550,31 +325,29 @@

};

-&ipu_di0_disp1 {
- remote-endpoint = <&display_in>;
-};
+&i2c_gpio {
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>, /* sda */
+ <&gpio3 4 GPIO_ACTIVE_HIGH>; /* scl */

-&ssi2 {
- status = "okay";
+ sgtl5000: codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clk_26M_snd>;
+ VDDA-supply = <&vdig_reg>;
+ VDDIO-supply = <&vvideo_reg>;
+ #sound-dai-cells = <0>;
+ };
};

-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- status = "okay";
+&ipu_di0_disp1 {
+ remote-endpoint = <&display_in>;
};

-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
+&ssi2 {
status = "okay";
};

&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- status = "okay";
-
rave-sp {
compatible = "zii,rave-sp-rdu1";
current-speed = <38400>;
@@ -593,7 +366,7 @@
fsl,usbphy = <&usbh1phy>;
disable-over-current;
maximum-speed = "full-speed";
- vbus-supply = <&reg_5p0v_main>;
+ vbus-supply = <&usb_vbus>;
status = "okay";
};

@@ -604,20 +377,12 @@
phy_type = "ulpi";
fsl,usbphy = <&usbh2phy>;
disable-over-current;
- vbus-supply = <&reg_5p0v_main>;
+ vbus-supply = <&usb_vbus>;
status = "okay";
};

-&usbphy0 {
- vcc-supply = <&vusb_reg>;
-};
-
-&usbotg {
- dr_mode = "host";
- disable-over-current;
- phy_type = "utmi_wide";
- vbus-supply = <&reg_5p0v_main>;
- status = "okay";
+&sysled3 {
+ label = "system:green:status";
};

&iomuxc {
@@ -642,27 +407,6 @@
>;
};

- pinctrl_ecspi1: ecspi1grp {
- fsl,pins = <
- MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
- MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
- MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
- MX51_PAD_CSPI1_SS0__GPIO4_24 0x85
- MX51_PAD_CSPI1_SS1__GPIO4_25 0x85
- >;
- };
-
- pinctrl_esdhc1: esdhc1grp {
- fsl,pins = <
- MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
- MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
- MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
- MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
- MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
- MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
- >;
- };
-
pinctrl_fec: fecgrp {
fsl,pins = <
MX51_PAD_EIM_EB2__FEC_MDIO 0x1f5
@@ -696,13 +440,6 @@
>;
};

- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
- MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
- >;
- };
-
pinctrl_ipu_disp1: ipudisp1grp {
fsl,pins = <
MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5
@@ -741,13 +478,6 @@
>;
};

- pinctrl_pmic: pmicgrp {
- fsl,pins = <
- MX51_PAD_GPIO1_4__GPIO1_4 0x1e0
- MX51_PAD_GPIO1_8__GPIO1_8 0x21e2
- >;
- };
-
pinctrl_sndgate26mhz: sndgate26mhzgrp {
fsl,pins = <
MX51_PAD_CSPI1_RDY__GPIO4_26 0x85
--
1.9.1