[PATCH v2 4/4] ARM: dts: i.MX6: imx6dl-mamoj: Add usb host and device support

From: Jagan Teki
Date: Thu Jun 07 2018 - 09:48:38 EST


From: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>

Add USB host and device support for BTicino i.MX6DL Mamoj board.

Signed-off-by: Simone CIANNI <simone.cianni@xxxxxxxxxx>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@xxxxxxxxxx>
Signed-off-by: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Fabio Estevam <fabio.estevam@xxxxxxx>
---
Changes for v2:
- collect Fabio r-w-b tag

arch/arm/boot/dts/imx6dl-mamoj.dts | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts
index 5034b086035f..a727e1471006 100644
--- a/arch/arm/boot/dts/imx6dl-mamoj.dts
+++ b/arch/arm/boot/dts/imx6dl-mamoj.dts
@@ -134,6 +134,17 @@
vin-supply = <&reg_lcd_vgl>;
};

+ reg_usb_host: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usbhost-vbus";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbhost>;
+ regulator-min-microvolt = <50000000>;
+ regulator-max-microvolt = <50000000>;
+ gpio = <&gpio6 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_wl18xx_vmmc: regulator-wl18xx-vmcc {
compatible = "regulator-fixed";
regulator-name = "vwl1807";
@@ -297,6 +308,16 @@
status = "okay";
};

+&usbh1 {
+ vbus-supply = <&reg_usb_host>;
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
@@ -428,6 +449,12 @@
>;
};

+ pinctrl_usbhost: usbhost {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0
+ >;
+ };
+
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17069
--
2.14.3