Re: [PATCH 1/4] serial: 8250: Copy em485 from port to real port.

[Andy Shevchenko]

On Wed, 2018-06-06 at 14:15 +0200, Giulio Benetti wrote:
> Il 06/06/2018 13:56, Andy Shevchenko ha scritto:
> > On Wed, 2018-06-06 at 11:49 +0200, Giulio Benetti wrote:
> > > em485 gets lost during
> > > 
> > > Copy em485 to final uart port.
> > > 
> > 
> > Is it needed at all?
> > 
> > The individual driver decides either to use software emulation (and
> > calls explicitly serial8250_em485_init() for that) or do HW assisted
> > stuff.
> 
> In 8250_dw.c, during probe(), I need to call dw8250_rs485_config() 
> against local struct uart_8250_port uart = {};
> Inside serial8250_register_8250_port() not all uart fields are 
> copied(em485 too).
> So after probe, em485 is NULL.
> 
> Another way could be to call dw8250_rs485_config() against real uart 
> port, after calling serial8250_register_8250_port(),
> would it make sense?

Look at OMAP case closely. They have a callback to configure RS485 which
is called in uart_set_rs485_config()  which is called whenever user
space does TIOCGRS485 IOCTL.

So, it's completely driven by user space which makes sense by my
opinion.

-- 
Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Intel Finland Oy