[PATCH v3 5/6] ARM: dts: Add generic interconnect target module node for MCAN

[Faiz Abbas]

The ti-sysc driver provides support for manipulating the idle modes
and interconnect level resets.

Add the generic interconnect target module node for MCAN to support
the same.

CC: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx>
---
 arch/arm/boot/dts/dra76x.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
index bfc82636999c..5157cc431574 100644
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ b/arch/arm/boot/dts/dra76x.dtsi
@@ -11,6 +11,24 @@
 / {
 	compatible = "ti,dra762", "ti,dra7";
 
+	ocp {
+		target-module@42c01900 {
+			compatible = "ti,sysc-dra7-mcan", "ti,sysc";
+			ranges = <0x0 0x42c00000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x42c01900 0x4>,
+			      <0x42c01904 0x4>,
+			      <0x42c01908 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET |
+					 SYSC_DRA7_MCAN_ENAWAKEUP)>;
+			ti,syss-mask = <1>;
+			clocks = <&wkupaon_clkctrl DRA7_ADC_CLKCTRL 0>;
+			clock-names = "fck";
+		};
+	};
+
 };
 
 /* MCAN interrupts are hard-wired to irqs 67, 68 */
-- 
2.17.0