Re: [PATCH v5 3/4] clk: bd71837: Devicetree bindings for ROHM BD71837 PMIC

[Matti Vaittinen]

On Tue, Jun 05, 2018 at 09:49:32AM -0600, Rob Herring wrote:
> On Mon, Jun 04, 2018 at 04:18:53PM +0300, Matti Vaittinen wrote:
> > Document devicetree bindings for ROHM BD71837 PMIC clock output.
> > 
> > Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
> > ---
> >  .../bindings/clock/rohm,bd71837-clock.txt          | 38 ++++++++++++++++++++++
> >  1 file changed, 38 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/clock/rohm,bd71837-clock.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/clock/rohm,bd71837-clock.txt b/Documentation/devicetree/bindings/clock/rohm,bd71837-clock.txt
> > new file mode 100644
> > index 000000000000..771acfe34114
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/rohm,bd71837-clock.txt
> > @@ -0,0 +1,38 @@
> > +ROHM BD71837 Power Management Integrated Circuit clock bindings
> 
> This needs to be added to the MFD doc. One node should be covered by at 
> most 1 document.

I was thinking of that too. But then I asked why? I also thought that if
one knows there is clock block in the chip - where does he look for
binding document? From clock folder. Then I saw how bindings for
MAX77686 chip were written and thought that this is beneficial for all.
MFD document directs to clock and regulator docs and on othe other hand,
clock document clearly states that properties it describes must be
present "in main device node of the MFD chip".

Don't you think on searching for clock bindings should find something
from clock folder? I can follow your instruction here but I think
the user might be happy if he found something under bindings/clock for
clock related properties.

Br,
	Matti Vaittinen