Re: [PATCH V1 1/3] scsi: ufs: set the device reference clock setting

From: Adrian Hunter
Date: Fri Jun 01 2018 - 08:30:54 EST


On 01/06/18 13:42, Sayali Lokhande wrote:
> From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
>
> UFS host supplies the reference clock to UFS device and UFS device
> specification allows host to provide one of the 4 frequencies (19.2 MHz,
> 26 MHz, 38.4 MHz, 52 MHz) for reference clock. Host should set the
> device reference clock frequency setting in the device based on what
> frequency it is supplying to UFS device.
>
> Signed-off-by: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
> [cang@xxxxxxxxxxxxxx: Resolved trivial merge conflicts]
> Signed-off-by: Can Guo <cang@xxxxxxxxxxxxxx>
> Signed-off-by: Sayali Lokhande <sayalil@xxxxxxxxxxxxxx>
> ---
> drivers/scsi/ufs/ufs.h | 9 +++++++
> drivers/scsi/ufs/ufshcd.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++
> drivers/scsi/ufs/ufshcd.h | 1 +
> 3 files changed, 72 insertions(+)
>
> diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
> index 14e5bf7..e15deb0 100644
> --- a/drivers/scsi/ufs/ufs.h
> +++ b/drivers/scsi/ufs/ufs.h
> @@ -378,6 +378,15 @@ enum query_opcode {
> UPIU_QUERY_OPCODE_TOGGLE_FLAG = 0x8,
> };
>
> +/* bRefClkFreq attribute values */
> +enum ref_clk_freq {
> + REF_CLK_FREQ_19_2_MHZ = 0x0,
> + REF_CLK_FREQ_26_MHZ = 0x1,
> + REF_CLK_FREQ_38_4_MHZ = 0x2,
> + REF_CLK_FREQ_52_MHZ = 0x3,
> + REF_CLK_FREQ_MAX = REF_CLK_FREQ_52_MHZ,
> +};
> +
> /* Query response result code */
> enum {
> QUERY_RESULT_SUCCESS = 0x00,
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index c5b1bf1..3669bc4 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -6297,6 +6297,63 @@ static void ufshcd_def_desc_sizes(struct ufs_hba *hba)
> }
>
> /**
> + * ufshcd_set_dev_ref_clk - set the device bRefClkFreq
> + * @hba: per-adapter instance
> + * @ref_clk_freq: refrerence clock frequency to be set
> + *
> + * Read the current value of the bRefClkFreq attribute from device and update it
> + * if host is supplying different reference clock frequency than one mentioned
> + * in bRefClkFreq attribute.
> + *
> + * Returns zero on success, non-zero error value on failure.
> + */
> +static int ufshcd_set_dev_ref_clk(struct ufs_hba *hba, u32 ref_clk_freq)
> +{
> + int err = 0;
> + int ref_clk = -1;
> + static const char * const ref_clk_freqs[] = {"19.2 MHz", "26 MHz",
> + "38.4 MHz", "52 MHz"};
> +
> + hba->dev_ref_clk_freq = ref_clk_freq;
> + err = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
> + QUERY_ATTR_IDN_REF_CLK_FREQ, 0, 0, &ref_clk);
> +
> + if (err) {
> + dev_err(hba->dev, "%s: failed reading bRefClkFreq. err = %d\n",
> + __func__, err);
> + goto out;
> + }
> +
> + if ((ref_clk < 0) || (ref_clk > REF_CLK_FREQ_52_MHZ)) {

If you used u32 ref_clk then you wouldn't have to check < 0, also you should
use REF_CLK_FREQ_MAX not REF_CLK_FREQ_52_MHZ, but really why is this check
needed anyway?

> + dev_err(hba->dev, "%s: invalid ref_clk setting = %d\n",
> + __func__, ref_clk);
> + err = -EINVAL;
> + goto out;
> + }
> +
> + if (ref_clk == hba->dev_ref_clk_freq)
> + goto out; /* nothing to update */
> +
> + err = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR,
> + QUERY_ATTR_IDN_REF_CLK_FREQ, 0, 0,
> + &hba->dev_ref_clk_freq);
> +
> + if (err)
> + dev_err(hba->dev, "%s: bRefClkFreq setting to %s failed\n",
> + __func__, ref_clk_freqs[hba->dev_ref_clk_freq]);
> + else
> + /*
> + * It is good to print this out here to debug any later failures
> + * related to gear switch.
> + */
> + dev_info(hba->dev, "%s: bRefClkFreq setting to %s succeeded\n",
> + __func__, ref_clk_freqs[hba->dev_ref_clk_freq]);

Why not make this dev_dbg and print always even when there is no update.

> +
> +out:
> + return err;
> +}
> +
> +/**
> * ufshcd_probe_hba - probe hba to detect device and initialize
> * @hba: per-adapter instance
> *
> @@ -6361,6 +6418,11 @@ static int ufshcd_probe_hba(struct ufs_hba *hba)
> "%s: Failed getting max supported power mode\n",
> __func__);
> } else {
> + /*
> + * Set the right value to bRefClkFreq before attempting to
> + * switch to HS gears.
> + */
> + ufshcd_set_dev_ref_clk(hba, REF_CLK_FREQ_19_2_MHZ);
> ret = ufshcd_config_pwr_mode(hba, &hba->max_pwr_info.info);
> if (ret) {
> dev_err(hba->dev, "%s: Failed setting power mode, err = %d\n",
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index 8110dcd..b026ad8 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -548,6 +548,7 @@ struct ufs_hba {
> void *priv;
> unsigned int irq;
> bool is_irq_enabled;
> + u32 dev_ref_clk_freq;
>
> /* Interrupt aggregation support is broken */
> #define UFSHCD_QUIRK_BROKEN_INTR_AGGR 0x1
>