Re: [PATCH net-next v3 0/7] Add support for QCA8334 switch

From: David Miller
Date: Wed May 23 2018 - 14:54:20 EST


From: "Michal Vokáč" <vokac.m@xxxxxxxxx>
Date: Wed, 23 May 2018 08:20:17 +0200

> This series basically adds support for a QCA8334 ethernet switch to the
> qca8k driver. It is a four-port variant of the already supported seven
> port QCA8337. Register map is the same for the whole familly and all chips
> have the same device ID.
>
> Major part of this series enhances the CPU port setting. Currently the CPU
> port is not set to any sensible defaults compatible with the xGMII
> interface. This series forces the CPU port to its maximum bandwidth and
> also allows to adjust the new defaults using fixed-link device tree
> sub-node.
>
> Alongside these changes I fixed two checkpatch warnings regarding SPDX and
> redundant parentheses.
>
> Changes in v3:
> - Rebased on latest net-next/master.
> - Corrected fixed-link documentation.

Series applied, thank you.