[next, PATCH 1/6] usb: mtu3: re-enable controller to accept LPM request after LPM resume

From: Chunfeng Yun
Date: Wed May 23 2018 - 04:05:15 EST


After the controller receives a LPM request, it will reject the LPM
request, and need software to re-enable it after LPM resume if the
controller doesn't remote wakeup from L1 automatically

Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
drivers/usb/mtu3/mtu3_core.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index b1b99a8..65ff53a 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -176,7 +176,7 @@ static void mtu3_intr_enable(struct mtu3 *mtu)
mtu3_writel(mbase, U3D_LV1IESR, value);

/* Enable U2 common USB interrupts */
- value = SUSPEND_INTR | RESUME_INTR | RESET_INTR;
+ value = SUSPEND_INTR | RESUME_INTR | RESET_INTR | LPM_RESUME_INTR;
mtu3_writel(mbase, U3D_COMMON_USB_INTR_ENABLE, value);

if (mtu->is_u3_ip) {
@@ -692,6 +692,12 @@ static irqreturn_t mtu3_u2_common_isr(struct mtu3 *mtu)
if (u2comm & RESET_INTR)
mtu3_gadget_reset(mtu);

+ if (u2comm & LPM_RESUME_INTR) {
+ if (!(mtu3_readl(mbase, U3D_POWER_MANAGEMENT) & LPM_HRWE))
+ mtu3_setbits(mbase, U3D_USB20_MISC_CONTROL,
+ LPM_U3_ACK_EN);
+ }
+
return IRQ_HANDLED;
}

--
1.9.1