[PATCH v1 1/2] spi: bcm-qspi: Avoid setting MSPI_CDRAM_PCS for spi-nor master

From: Kamal Dasu
Date: Wed Apr 25 2018 - 14:28:47 EST


Added fix for probing of spi-nor device non-zero chip selects. Set
MSPI_CDRAM_PCS (peripheral chip select) with spi master for MSPI
controller and not for MSPI/BSPI spi-nor master controller. Ensure
setting of cs bit in chip select register on chip select change.

Signed-off-by: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
---
drivers/spi/spi-bcm-qspi.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index 1596d35..2946989 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -519,16 +519,19 @@ static void bcm_qspi_disable_bspi(struct bcm_qspi *qspi)

static void bcm_qspi_chip_select(struct bcm_qspi *qspi, int cs)
{
- u32 data = 0;
+ u32 rd = 0;
+ u32 wr = 0;

- if (qspi->curr_cs == cs)
- return;
if (qspi->base[CHIP_SELECT]) {
- data = bcm_qspi_read(qspi, CHIP_SELECT, 0);
- data = (data & ~0xff) | (1 << cs);
- bcm_qspi_write(qspi, CHIP_SELECT, 0, data);
+ rd = bcm_qspi_read(qspi, CHIP_SELECT, 0);
+ wr = (rd & ~0xff) | (1 << cs);
+ if (rd == wr)
+ return;
+ bcm_qspi_write(qspi, CHIP_SELECT, 0, wr);
usleep_range(10, 20);
}
+
+ dev_dbg(&qspi->pdev->dev, "using cs:%d\n", cs);
qspi->curr_cs = cs;
}

@@ -755,8 +758,13 @@ static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi)
dev_dbg(&qspi->pdev->dev, "WR %04x\n", val);
}
mspi_cdram = MSPI_CDRAM_CONT_BIT;
- mspi_cdram |= (~(1 << spi->chip_select) &
- MSPI_CDRAM_PCS);
+
+ if (has_bspi(qspi))
+ mspi_cdram &= ~1;
+ else
+ mspi_cdram |= (~(1 << spi->chip_select) &
+ MSPI_CDRAM_PCS);
+
mspi_cdram |= ((tp.trans->bits_per_word <= 8) ? 0 :
MSPI_CDRAM_BITSE_BIT);

--
2.7.4