[PATCH v6 3/7] remoteproc/davinci: add the missing retval check for clk_enable()

From: Bartosz Golaszewski
Date: Tue Apr 17 2018 - 13:32:23 EST


From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>

The davinci platform is being switched to using the common clock
framework, where clk_enable() can fail. Add the return value check.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
Acked-by: Suman Anna <s-anna@xxxxxx>
Reviewed-by: David Lechner <david@xxxxxxxxxxxxxx>
---
drivers/remoteproc/da8xx_remoteproc.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
index bf3b9034c319..2b24291337b7 100644
--- a/drivers/remoteproc/da8xx_remoteproc.c
+++ b/drivers/remoteproc/da8xx_remoteproc.c
@@ -138,6 +138,7 @@ static int da8xx_rproc_start(struct rproc *rproc)
struct device *dev = rproc->dev.parent;
struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
struct clk *dsp_clk = drproc->dsp_clk;
+ int ret;

/* hw requires the start (boot) address be on 1KB boundary */
if (rproc->bootaddr & 0x3ff) {
@@ -148,7 +149,12 @@ static int da8xx_rproc_start(struct rproc *rproc)

writel(rproc->bootaddr, drproc->bootreg);

- clk_enable(dsp_clk);
+ ret = clk_enable(dsp_clk);
+ if (ret) {
+ dev_err(dev, "clk_enable() failed: %d\n", ret);
+ return ret;
+ }
+
davinci_clk_reset_deassert(dsp_clk);

return 0;
--
2.17.0