[PATCH v2] docs: kernel-parameters.txt: Fix whitespace

From: Thymo van Beers
Date: Mon Apr 16 2018 - 17:49:51 EST


Some lines used spaces instead of tabs at line start.
This can cause mangled lines in editors due to inconsistency.

Replace spaces for tabs where appropriate.

Signed-off-by: Thymo van Beers <thymovanbeers@xxxxxxxxx>
---
Changes in v2:
- Rebase against docs-next
- Fix indentation modifications

Documentation/admin-guide/kernel-parameters.txt | 136 ++++++++++++------------
1 file changed, 68 insertions(+), 68 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 3487be79847c..f625f65c286f 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -106,11 +106,11 @@
use by PCI
Format: <irq>,<irq>...

- acpi_mask_gpe= [HW,ACPI]
+ acpi_mask_gpe= [HW,ACPI]
Due to the existence of _Lxx/_Exx, some GPEs triggered
by unsupported hardware/firmware features can result in
- GPE floodings that cannot be automatically disabled by
- the GPE dispatcher.
+ GPE floodings that cannot be automatically disabled by
+ the GPE dispatcher.
This facility can be used to prevent such uncontrolled
GPE floodings.
Format: <int>
@@ -472,10 +472,10 @@
for platform specific values (SB1, Loongson3 and
others).

- ccw_timeout_log [S390]
+ ccw_timeout_log [S390]
See Documentation/s390/CommonIO for details.

- cgroup_disable= [KNL] Disable a particular controller
+ cgroup_disable= [KNL] Disable a particular controller
Format: {name of the controller(s) to disable}
The effects of cgroup_disable=foo are:
- foo isn't auto-mounted if you mount all cgroups in
@@ -641,8 +641,8 @@
hvc<n> Use the hypervisor console device <n>. This is for
both Xen and PowerPC hypervisors.

- If the device connected to the port is not a TTY but a braille
- device, prepend "brl," before the device type, for instance
+ If the device connected to the port is not a TTY but a braille
+ device, prepend "brl," before the device type, for instance
console=brl,ttyS0
For now, only VisioBraille is supported.

@@ -662,7 +662,7 @@

consoleblank= [KNL] The console blank (screen saver) timeout in
seconds. A value of 0 disables the blank timer.
- Defaults to 0.
+ Defaults to 0.

coredump_filter=
[KNL] Change the default value for
@@ -730,7 +730,7 @@
or memory reserved is below 4G.

cryptomgr.notests
- [KNL] Disable crypto self-tests
+ [KNL] Disable crypto self-tests

cs89x0_dma= [HW,NET]
Format: <dma>
@@ -746,7 +746,7 @@
Format: <port#>,<type>
See also Documentation/input/devices/joystick-parport.rst

- ddebug_query= [KNL,DYNAMIC_DEBUG] Enable debug messages at early boot
+ ddebug_query= [KNL,DYNAMIC_DEBUG] Enable debug messages at early boot
time. See
Documentation/admin-guide/dynamic-debug-howto.rst for
details. Deprecated, see dyndbg.
@@ -833,7 +833,7 @@
causing system reset or hang due to sending
INIT from AP to BSP.

- disable_ddw [PPC/PSERIES]
+ disable_ddw [PPC/PSERIES]
Disable Dynamic DMA Window support. Use this if
to workaround buggy firmware.

@@ -1188,7 +1188,7 @@
parameter will force ia64_sal_cache_flush to call
ia64_pal_cache_flush instead of SAL_CACHE_FLUSH.

- forcepae [X86-32]
+ forcepae [X86-32]
Forcefully enable Physical Address Extension (PAE).
Many Pentium M systems disable PAE but may have a
functionally usable PAE implementation.
@@ -1247,7 +1247,7 @@

gamma= [HW,DRM]

- gart_fix_e820= [X86_64] disable the fix e820 for K8 GART
+ gart_fix_e820= [X86_64] disable the fix e820 for K8 GART
Format: off | on
default: on

@@ -1341,11 +1341,11 @@
x86-64 are 2M (when the CPU supports "pse") and 1G
(when the CPU supports the "pdpe1gb" cpuinfo flag).

- hvc_iucv= [S390] Number of z/VM IUCV hypervisor console (HVC)
- terminal devices. Valid values: 0..8
- hvc_iucv_allow= [S390] Comma-separated list of z/VM user IDs.
- If specified, z/VM IUCV HVC accepts connections
- from listed z/VM user IDs only.
+ hvc_iucv= [S390] Number of z/VM IUCV hypervisor console (HVC)
+ terminal devices. Valid values: 0..8
+ hvc_iucv_allow= [S390] Comma-separated list of z/VM user IDs.
+ If specified, z/VM IUCV HVC accepts connections
+ from listed z/VM user IDs only.

keep_bootcon [KNL]
Do not unregister boot console at start. This is only
@@ -1353,11 +1353,11 @@
between unregistering the boot console and initializing
the real console.

- i2c_bus= [HW] Override the default board specific I2C bus speed
- or register an additional I2C bus that is not
- registered from board initialization code.
- Format:
- <bus_id>,<clkrate>
+ i2c_bus= [HW] Override the default board specific I2C bus speed
+ or register an additional I2C bus that is not
+ registered from board initialization code.
+ Format:
+ <bus_id>,<clkrate>

i8042.debug [HW] Toggle i8042 debug mode
i8042.unmask_kbd_data
@@ -1386,7 +1386,7 @@
Default: only on s2r transitions on x86; most other
architectures force reset to be always executed
i8042.unlock [HW] Unlock (ignore) the keylock
- i8042.kbdreset [HW] Reset device connected to KBD port
+ i8042.kbdreset [HW] Reset device connected to KBD port

i810= [HW,DRM]

@@ -1548,13 +1548,13 @@
programs exec'd, files mmap'd for exec, and all files
opened for read by uid=0.

- ima_template= [IMA]
+ ima_template= [IMA]
Select one of defined IMA measurements template formats.
Formats: { "ima" | "ima-ng" | "ima-sig" }
Default: "ima-ng"

ima_template_fmt=
- [IMA] Define a custom template format.
+ [IMA] Define a custom template format.
Format: { "field1|...|fieldN" }

ima.ahash_minsize= [IMA] Minimum file size for asynchronous hash usage
@@ -1597,7 +1597,7 @@
inport.irq= [HW] Inport (ATI XL and Microsoft) busmouse driver
Format: <irq>

- int_pln_enable [x86] Enable power limit notification interrupt
+ int_pln_enable [x86] Enable power limit notification interrupt

integrity_audit=[IMA]
Format: { "0" | "1" }
@@ -1650,39 +1650,39 @@
0 disables intel_idle and fall back on acpi_idle.
1 to 9 specify maximum depth of C-state.

- intel_pstate= [X86]
- disable
- Do not enable intel_pstate as the default
- scaling driver for the supported processors
- passive
- Use intel_pstate as a scaling driver, but configure it
- to work with generic cpufreq governors (instead of
- enabling its internal governor). This mode cannot be
- used along with the hardware-managed P-states (HWP)
- feature.
- force
- Enable intel_pstate on systems that prohibit it by default
- in favor of acpi-cpufreq. Forcing the intel_pstate driver
- instead of acpi-cpufreq may disable platform features, such
- as thermal controls and power capping, that rely on ACPI
- P-States information being indicated to OSPM and therefore
- should be used with caution. This option does not work with
- processors that aren't supported by the intel_pstate driver
- or on platforms that use pcc-cpufreq instead of acpi-cpufreq.
- no_hwp
- Do not enable hardware P state control (HWP)
- if available.
- hwp_only
- Only load intel_pstate on systems which support
- hardware P state control (HWP) if available.
- support_acpi_ppc
- Enforce ACPI _PPC performance limits. If the Fixed ACPI
- Description Table, specifies preferred power management
- profile as "Enterprise Server" or "Performance Server",
- then this feature is turned on by default.
- per_cpu_perf_limits
- Allow per-logical-CPU P-State performance control limits using
- cpufreq sysfs interface
+ intel_pstate= [X86]
+ disable
+ Do not enable intel_pstate as the default
+ scaling driver for the supported processors
+ passive
+ Use intel_pstate as a scaling driver, but configure it
+ to work with generic cpufreq governors (instead of
+ enabling its internal governor). This mode cannot be
+ used along with the hardware-managed P-states (HWP)
+ feature.
+ force
+ Enable intel_pstate on systems that prohibit it by default
+ in favor of acpi-cpufreq. Forcing the intel_pstate driver
+ instead of acpi-cpufreq may disable platform features, such
+ as thermal controls and power capping, that rely on ACPI
+ P-States information being indicated to OSPM and therefore
+ should be used with caution. This option does not work with
+ processors that aren't supported by the intel_pstate driver
+ or on platforms that use pcc-cpufreq instead of acpi-cpufreq.
+ no_hwp
+ Do not enable hardware P state control (HWP)
+ if available.
+ hwp_only
+ Only load intel_pstate on systems which support
+ hardware P state control (HWP) if available.
+ support_acpi_ppc
+ Enforce ACPI _PPC performance limits. If the Fixed ACPI
+ Description Table, specifies preferred power management
+ profile as "Enterprise Server" or "Performance Server",
+ then this feature is turned on by default.
+ per_cpu_perf_limits
+ Allow per-logical-CPU P-State performance control limits using
+ cpufreq sysfs interface

intremap= [X86-64, Intel-IOMMU]
on enable Interrupt Remapping (default)
@@ -2027,7 +2027,7 @@
* [no]ncqtrim: Turn off queued DSM TRIM.

* nohrst, nosrst, norst: suppress hard, soft
- and both resets.
+ and both resets.

* rstonce: only attempt one reset during
hot-unplug link recovery
@@ -2215,7 +2215,7 @@
[KNL,SH] Allow user to override the default size for
per-device physically contiguous DMA buffers.

- memhp_default_state=online/offline
+ memhp_default_state=online/offline
[KNL] Set the initial state for the memory hotplug
onlining policy. If not specified, the default value is
set according to the
@@ -2762,7 +2762,7 @@
[X86,PV_OPS] Disable paravirtualized VMware scheduler
clock and use the default one.

- no-steal-acc [X86,KVM] Disable paravirtualized steal time accounting.
+ no-steal-acc [X86,KVM] Disable paravirtualized steal time accounting.
steal time is computed, but won't influence scheduler
behaviour

@@ -2823,7 +2823,7 @@
notsc [BUGS=X86-32] Disable Time Stamp Counter

nowatchdog [KNL] Disable both lockup detectors, i.e.
- soft-lockup and NMI watchdog (hard-lockup).
+ soft-lockup and NMI watchdog (hard-lockup).

nowb [ARM]

@@ -2843,7 +2843,7 @@
If the dependencies are under your control, you can
turn on cpu0_hotplug.

- nps_mtm_hs_ctr= [KNL,ARC]
+ nps_mtm_hs_ctr= [KNL,ARC]
This parameter sets the maximum duration, in
cycles, each HW thread of the CTOP can run
without interruptions, before HW switches it.
@@ -2984,7 +2984,7 @@

pci=option[,option...] [PCI] various PCI subsystem options:
earlydump [X86] dump PCI config space before the kernel
- changes anything
+ changes anything
off [X86] don't probe for the PCI bus
bios [X86-32] force use of PCI BIOS, don't access
the hardware directly. Use this if your machine
@@ -3072,7 +3072,7 @@
is enabled by default. If you need to use this,
please report a bug.
nocrs [X86] Ignore PCI host bridge windows from ACPI.
- If you need to use this, please report a bug.
+ If you need to use this, please report a bug.
routeirq Do IRQ routing for all PCI devices.
This is normally done in pci_enable_device(),
so this option is a temporary workaround
@@ -4391,7 +4391,7 @@

usbcore.initial_descriptor_timeout=
[USB] Specifies timeout for the initial 64-byte
- USB_REQ_GET_DESCRIPTOR request in milliseconds
+ USB_REQ_GET_DESCRIPTOR request in milliseconds
(default 5000 = 5.0 seconds).

usbcore.nousb [USB] Disable the USB subsystem
--
2.16.1