Re: [PATCH 2/2] efi: Add embedded peripheral firmware support

From: Luis R. Rodriguez
Date: Tue Apr 03 2018 - 14:47:46 EST


In your next patches please Cc the folks I added for future review as well.
We don't have a mailing list for the firmware API so I just tend to Cc
who I think should help review when needed.

On Tue, Apr 03, 2018 at 10:33:25AM +0200, Hans de Goede wrote:
> Hi Luis,
>
> Thank you for the review.
>
> On 03-04-18 01:23, Luis R. Rodriguez wrote:
> > On Sat, Mar 31, 2018 at 02:19:44PM +0200, Hans de Goede wrote:
> > > Just like with PCI options ROMs, which we save in the setup_efi_pci*
> > > functions from arch/x86/boot/compressed/eboot.c, the EFI code / ROM itself
> > > sometimes may contain data which is useful/necessary for peripheral drivers
> > > to have access to.
> > >
> > > Specifically the EFI code may contain an embedded copy of firmware which
> > > needs to be (re)loaded into the peripheral. Normally such firmware would be
> > > part of linux-firmware, but in some cases this is not feasible, for 2
> > > reasons:
> > >
> > > 1) The firmware is customized for a specific use-case of the chipset / use
> > > with a specific hardware model, so we cannot have a single firmware file
> > > for the chipset. E.g. touchscreen controller firmwares are compiled
> > > specifically for the hardware model they are used with, as they are
> > > calibrated for a specific model digitizer.
> >
> > Some devices have OTP and use this sort of calibration data,
>
> Right, I'm not sure it really is OTP and not flash, but many touchscreen
> controllers do come with their firmware embedded into the controller,

It varies, sometimes firmware has default fluff calibration data as well which
can be used if the device does not have specific calibration data.

> but not all unfortunately.

Indeed.

> > I was unaware of
> > the use of EFI to stash firmware. Good to know, but can you also provide
> > references to what part of what standard should be followed for it in
> > documentation?
>
> This is not part of the standard. There has been a long(ish) standing issue
> with us not being able to get re-distribute permission for the firmware for
> some touchscreen controllers found on cheap x86 devices. Which means that
> we cannot put it in Linux firmware.

BTW do these cheap x86 devices have hw signing support? Just curious thinking
long term here. Because of it is not-standard then perhaps wen can partner
later up with a vendor to this properly and actually support hw firmware
singing.

> Dave Olsthoorn (in the Cc) noticed that the touchscreen did work in the
> refind bootload UI, so the EFI code must have a copy of the firmware.

:)

> I asked Peter Jones for suggestions how to extract this during boot and
> he suggested seeing if there was a copy of the firmware in the
> EFI_BOOT_SERVICES_CODE memory segment, which it turns out there is.

Sneaky Pete, nice. So essentially we're reverse engineering support for this.

Anyway please mention that this is not part of standard in the documentation,
and we've just found out in practice some vendors are doing this. That would
avoid having people ask later.

> My patch to add support for this contains a table of device-model (dmi
> strings), firmware header (first 64 bits), length and crc32 and then if
> we boot on a device-model which is in the table the code scans the
> EFI_BOOT_SERVICES_CODE for the prefix, if found checks the crc and
> caches the firmware for later use by request-firmware.

Neat, best to add proper docs for this.

> So I just do a brute-force search for the firmware, this really is hack,
> nothing standard about it I'm afraid. But it works on 4 different x86
> tablets I have and makes the touchscreen work OOTB on them, so I believe
> it is a worthwhile hack to have.

Absolutely, just not to shove an entire fallback firmware path to all users.

> > > 2) Despite repeated attempts we have failed to get permission to
> > > redistribute the firmware. This is especially a problem with customized
> > > firmwares, these get created by the chip vendor for a specific ODM and the
> > > copyright may partially belong with the ODM, so the chip vendor cannot
> > > give a blanket permission to distribute these.
> > >
> > > This commit adds support for finding peripheral firmware embedded in the
> > > EFI code and making this available to peripheral drivers through the
> > > standard firmware loading mechanism.
> >
> > Neat.
> >
> > > Note we check the EFI_BOOT_SERVICES_CODE for embedded firmware pretty
> > > late in the init sequence,
> >
> > This also creates a technical limitation on use for the API that users
> > should be aware of. Its important to document such limitation.
>
> I don't think this is a problem for any normal drivers, when I say pretty
> late I mean late in init/main.c: start_kernel(), so still before any normal
> drivers load.
>
> The first idea was to scan for the firmware at the same time we check for
> things as the ACPI BGRT logo stuff, but as mentioned that requires using
> early_mmap() which does not work for the amount of memory we want to map.

Either way its good we went down this rabbit hole so its clear.

> > Also if we can address the limitation that would be even better.
> >
> > For instance, on what part of the driver is the call to request firmware
> > being made? Note that we support async probe now, so if the call was done
> > on probe, it may be wise to use async probe, however, can we be *certain*
> > that the EFI firmware would have been parsed and ready by then? Please
> > check. It just may be the case.
> >
> > Or, if we use late_initcall() would that suffice on the driver, if they
> > used a request firmware call on init or probe?
>
> As said I think we still do it early enough for any driver use, when
> I wrote "late in the init sequence" I should have probably written something
> else, like "near the end of start_kernel() instead of from setup_arch()"

Alright.

> >
> > > this is on purpose because the typical
> > > EFI_BOOT_SERVICES_CODE memory-segment is too large for early_memremap().
> >
> > To be clear you neede to use memremap()
>
> Yes.
>
> > What mechanism would have in place to ensure that a driver which expects
> > firmware to be on EFI data to be already available prior to its driver's
> > call to initialize?
>
> See above, this still runs before start_kernel() calls rest_init() which is
> where any normal init calls (and driver probing) happens so still early
> enough for any users I can think of.

The firmware API is even used to load microcode, but that relies on built-in
firmware support. That code needs to be refactored to be a proper citizen of the
firmware API, right now its just a hack. Reason for asking all these details
was to ensure we document the restrictions correctly so that expecations are
set correctly for callers prior to rest_init(). Please be sure to document the
limitations.

> I think my poorly worded commit
> message is causing a bit of unnecessary confusion here, sorry about that.
>
> > You seem to say its this consumes about about 25 MiB now, and for now you
> > have made this a debug thing only? How have these size requirements changed
> > over time? Has EFI_BOOT_SERVICES_CODE grown over time? How much? Do we
> > expect it will blow up later?
>
> The debug only thing is only patch 1/2, which is mostly independent of this
> patch (which is 2/2), patch 1 exports the EFI_BOOT_SERVICES_* memory segments
> as blobs under /sys/kernel/debug/efi, which requires not freeing them
> (or making a copy) and this costs memory.

Ah got it.

> The purpose of this is to be
> able to easily check them for embedded firmwares when adding new entries
> to the table of known embedded firmwares used by this patch.
>
> This patch will work fine without the first patch even being present in
> the kernel and will also work fine without efi=debug.

Thanks for the clarification.

> > > This means we rely on the EFI_BOOT_SERVICES_CODE not being free-ed until
> > > efi_free_boot_services() is called, which means that this will only work
> > > on x86, if we ever want this on ARM we should make ARM delay the freeing
> > > of the EFI_BOOT_SERVICES_* memory-segments too.
> >
> > Why not do that as well with your patch?
>
> That requires making significant changes to the early bringup code on
> ARM, x86 keeps EFI_BOOT_SERVICES_* memory-segments around until near
> the end of start_kernel() because freeing them earlier triggers bugs
> in some x86 EFI implementations, ARM EFI implementations do not have
> these bugs, so they free them almost directly at boot.
>
> Changing this really falls outside the scope of this patch.

Sure but did you poke ARM folks about it? Maybe they can do it?
And if this becomes a common practice, perhaps they can do it with
actual firmware signing instead of a CRC.

Not sure how hard it is to exploit EFI_BOOT_SERVICES_CODE... but it
may help UEFI folks with a nice warm fuzzy to start doing this right
later instead of propagating what seems to be a cheap hack.

> > > Note this commit also modifies efi_mem_desc_lookup() to not skip
> > > EFI_BOOT_SERVICES_CODE memory-segments, so that efi_mem_reserve() works
> > > on such segments.
> > >
> > > Reported-by: Dave Olsthoorn <dave@xxxxxxxxx>
> > > Suggested-by: Peter Jones <pjones@xxxxxxxxxx>
> > > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> > > ---
> > > drivers/base/firmware_class.c | 29 +++
> > > drivers/firmware/efi/Makefile | 1 +
> > > drivers/firmware/efi/efi.c | 1 +
> > > drivers/firmware/efi/embedded-firmware.c | 232 +++++++++++++++++++++++
> > > include/linux/efi.h | 2 +
> > > init/main.c | 1 +
> > > 6 files changed, 266 insertions(+)
> > > create mode 100644 drivers/firmware/efi/embedded-firmware.c
> > >
> > > diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
> > > index 7dd36ace6152..b1e7b3de1975 100644
> > > --- a/drivers/base/firmware_class.c
> > > +++ b/drivers/base/firmware_class.c
> > > @@ -12,6 +12,7 @@
> > > #include <linux/capability.h>
> > > #include <linux/device.h>
> > > +#include <linux/efi.h>
> > > #include <linux/module.h>
> > > #include <linux/init.h>
> > > #include <linux/timer.h>
> > > @@ -1207,6 +1208,32 @@ static inline void unregister_sysfs_loader(void)
> > > #endif /* CONFIG_FW_LOADER_USER_HELPER */
> > > +#ifdef CONFIG_EFI
> > > +static int
> > > +fw_get_efi_embedded_fw(struct device *dev, struct fw_priv *fw_priv, int ret)
> > > +{
> > > + size_t size;
> > > + int rc;
> > > +
> > > + rc = efi_get_embedded_fw(fw_priv->fw_name, &fw_priv->data, &size,
> > > + fw_priv->data ? fw_priv->allocated_size : 0);
> > > + if (rc == 0) {
> > > + dev_dbg(dev, "using efi-embedded fw %s\n", fw_priv->fw_name);
> > > + fw_priv->size = size;
> > > + fw_state_done(fw_priv);
> > > + ret = 0;
> > > + }
> > > +
> > > + return ret;
> > > +}
> > > +#else
> > > +static inline int
> > > +fw_get_efi_embedded_fw(struct device *dev, struct fw_priv *fw_priv, int ret)
> > > +{
> > > + return ret;
> > > +}
> > > +#endif
> > > +
> > > /* prepare firmware and firmware_buf structs;
> > > * return 0 if a firmware is already assigned, 1 if need to load one,
> > > * or a negative error code
> > > @@ -1296,6 +1323,8 @@ _request_firmware(const struct firmware **firmware_p, const char *name,
> > > goto out;
> > > ret = fw_get_filesystem_firmware(device, fw->priv);
> > > + if (ret)
> > > + ret = fw_get_efi_embedded_fw(device, fw->priv, ret);
> >
> > This EFI firmware lookup is being used as a fallback mechanism, for *all*
> > requests. That's pretty aggressive and I'd like a bit more justification
> > for that approach.
>
> The fw_get_efi_embedded_fw() call is not that expensive, it walks the
> list of found firmwares, does a strcmp on the name and that is all it does,
> so I did not really see this as a problem, but if you want me to change this
> that is certainly possible.

The fallback mechanism / code has been a maintainer irritation for a long time now,
to verify its functionality, document it, and ensure folks understand how things
work. Best to be clear and simple about this functionality, adding more extensions
without any need just makes things more complex.

Another big reason is the amount of code implicated to support this which brings
me to the next request: please use a new kconfig to wrap this code into its own
kconfig entry.

The fallback mechanism code with CONFIG_FW_LOADER_USER_HELPER eats up
13436 bytes for instance and Josh has told me that even if Android
does enable it, there are still embedded devices out there that do not
want it and do want to reduce the size of their kernels by these
13436 bytes when possible.

How much code does enabling your code have to the kernel? Please add
that to the kconfig entry.

Oping in for a new mechanism via a kconfig is clearer to understand and
maintain, less code for folks, and specially since only a coupe of drivers
would be using this, its otherwise insane to enable by default.

In fact I'm now thinking this new fallback mechanism may be an
alternative to CONFIG_FW_LOADER_USER_HELPER but it very likely
can only work well for small firmware. How big are the currently
known firmwares BTW?

[0] https://lkml.kernel.org/r/20180301021956.GA12202@localhost

> > For instance, if its just a few drivers that really can use this, can't we just
> > add anew API call, say firmware_request_efi(), then add an internal flag for
> > this type of lookup and then this fallback mechanism would *only* be used for
> > those drivers.
>
> Yes that is certainly possible, currently there are 2 touchscreen drivers which
> can use this drivers/input/touchscreen/silead.c and
> drivers/input/touchscreen/chipone_icn8505.c, with the latter being a driver I just
> finished this weekend and which I will submit upstream soon.

OK, so only *one* upstream driver... Yeah with even more reason to never
consider this seriously by default upstream. It should be an opt-in
mechanism by drivers explicitly. In fact, it makes then wonder if we want
to even allow for the default fallback mechanism on the new call. I'm inclined
to suggest to *not* use it, given the intent and goal is clear by the
driver: first look for the file, if not found look for the firmware stashed
on on the EFI EFI_BOOT_SERVICES_CODE.

> > BTW please use linux-next to base your changes as a lot of things have changed
> > on the firmware API code, on queue on its way for v4.17-rc1.
>
> Ok, I usually prefer to only merge the relevant subsys-next into my personal
> tree rather then consuming the entirety of -next,

I just track linux-next separately on a different directory for this reason and
have it just --follow Linus' tree

[1] https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git/

> which subsys tree has
> the firmware bits ?

You can also rely on just Greg's driver-core tree and use the driver-core-next
branch [1], you can look at the new firmware_request_cache() for an example of
a new call but note that you want something more like
request_firmware_direct(). Note that this will soon be renamed to
firmware_request_direct() to follow the convention of API name prefix first, so
be sure to use the firmware_ prefix for your new call as with
firmware_request_cache().

> > Please be sure
> > to also extend the documentation on Documentation/driver-api/firmware/
> > respectively.
>
> Ok.
>
> > > if (ret) {
> > > if (!(opt_flags & FW_OPT_NO_WARN))
> > > dev_warn(device,
> > > diff --git a/drivers/firmware/efi/Makefile b/drivers/firmware/efi/Makefile
> > > index cb805374f4bc..cb946f7d0181 100644
> > > --- a/drivers/firmware/efi/Makefile
> > > +++ b/drivers/firmware/efi/Makefile
> > > @@ -13,6 +13,7 @@ KASAN_SANITIZE_runtime-wrappers.o := n
> > > obj-$(CONFIG_ACPI_BGRT) += efi-bgrt.o
> > > obj-$(CONFIG_EFI) += efi.o vars.o reboot.o memattr.o tpm.o
> > > obj-$(CONFIG_EFI) += capsule.o memmap.o
> > > +obj-$(CONFIG_EFI) += embedded-firmware.o
> > > obj-$(CONFIG_EFI_VARS) += efivars.o
> > > obj-$(CONFIG_EFI_ESRT) += esrt.o
> > > obj-$(CONFIG_EFI_VARS_PSTORE) += efi-pstore.o
> > > diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
> > > index fddc5f706fd2..1a5ea950f58f 100644
> > > --- a/drivers/firmware/efi/efi.c
> > > +++ b/drivers/firmware/efi/efi.c
> > > @@ -455,6 +455,7 @@ int __init efi_mem_desc_lookup(u64 phys_addr, efi_memory_desc_t *out_md)
> > > u64 end;
> > > if (!(md->attribute & EFI_MEMORY_RUNTIME) &&
> > > + md->type != EFI_BOOT_SERVICES_CODE &&
> > > md->type != EFI_BOOT_SERVICES_DATA &&
> > > md->type != EFI_RUNTIME_SERVICES_DATA) {
> > > continue;
> > > diff --git a/drivers/firmware/efi/embedded-firmware.c b/drivers/firmware/efi/embedded-firmware.c
> > > new file mode 100644
> > > index 000000000000..80848f332b22
> > > --- /dev/null
> > > +++ b/drivers/firmware/efi/embedded-firmware.c
> > > @@ -0,0 +1,232 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * Support for extracting embedded firmware for peripherals from EFI code,
> > > + *
> > > + * Copyright (c) 2018 Hans de Goede <hdegoede@xxxxxxxxxx>
> > > + */
> > > +
> > > +#include <linux/crc32.h>
> > > +#include <linux/dmi.h>
> > > +#include <linux/efi.h>
> > > +#include <linux/types.h>
> > > +
> > > +/* Sofar there are no machines with more then 1 interesting embedded firmware */
> > > +#define MAX_EMBEDDED_FIRMWARES 1
> > > +
> > > +struct embedded_fw_desc {
> > > + const char *name;
> > > + u8 prefix[8];
> > > + u32 length;
> > > + u32 crc;
> > > +};
> > > +
> > > +struct embedded_fw {
> > > + const char *name;
> > > + void *data;
> > > + size_t length;
> > > +};
> > > +
> > > +static struct embedded_fw found_fw[MAX_EMBEDDED_FIRMWARES];
> >
> > This is just saving a few bytes, and is still pretty inflexible.
> > If were going to support this, this is a rather inflexible way to
> > support this. I'd prefer we link list this. This way if we support,
> > its an empty list and grows depending on what we find.
> >
> > I don't see the benefit of a static array here in any way.
>
> It is not like we are ever going to have more then 2-3 embedded
> firmwares in the foreseeable future and having a static array
> saves the need to kmalloc the struct embedded_fw and the additional
> error handling for when this fails, so the array leads to simpler
> code.

Yes but you are not maintaining this code, I am and I have no faith a drive-by
patch author will come back and extend this later when needed. As such, yes
please use a linked list to enable us to easily grow this now.


> But if you really want me to change this over to a linked
> list I can change it.

If a linked list is *really* an issue, I'd like to know how. For instance, if
its a lot of bytes of code its worth considering then, specially if this is for
embedded. The inability to easily support growth is just concerning here.

> > > +static int found_fw_count;
> > > +
> > > +static struct embedded_fw_desc chuwi_vi8_plus_fw[] __initdata = {
> > > + {
> > > + .name = "chipone/icn8318-HAMP0002.fw",
> > > + .prefix = { 0xb0, 0x07, 0x00, 0x00, 0xe4, 0x07, 0x00, 0x00 },
> > > + .length = 35012,
> > > + .crc = 0x74dfd3fc,
> > > + },
> > > + {}
> > > +};
> > > +
> > > +static struct embedded_fw_desc chuwi_hi8_pro_fw[] __initdata = {
> > > + {
> > > + .name = "silead/gsl3680-chuwi-hi8-pro.fw",
> > > + .prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 },
> > > + .length = 39864,
> > > + .crc = 0xfe2bedba,
> > > + },
> > > + {}
> > > +};
> > > +
> > > +static struct embedded_fw_desc cube_iwork8_air_fw[] __initdata = {
> > > + {
> > > + .name = "silead/gsl3670-cube-iwork8-air.fw",
> > > + .prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 },
> > > + .length = 38808,
> > > + .crc = 0xfecde51f,
> > > + },
> > > + {}
> > > +};
> > > +
> > > +static struct embedded_fw_desc pipo_w2s_fw[] __initdata = {
> > > + {
> > > + .name = "silead/gsl1680-pipo-w2s.fw",
> > > + .prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 },
> > > + .length = 39072,
> > > + .crc = 0x28d5dc6c,
> > > + },
> > > + {}
> > > +};
> > > +
> > > +static struct dmi_system_id embedded_fw_table[] __initdata = {
> > > + {
> > > + /* Chuwi Vi8 Plus (CWI506) */
> > > + .driver_data = (void *)chuwi_vi8_plus_fw,
> > > + .matches = {
> > > + DMI_MATCH(DMI_SYS_VENDOR, "Hampoo"),
> > > + DMI_MATCH(DMI_PRODUCT_NAME, "D2D3_Vi8A1"),
> > > + DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
> > > + },
> > > + },
> > > + {
> > > + /* Chuwi Hi8 Pro (CWI513) */
> > > + .driver_data = (void *)chuwi_hi8_pro_fw,
> > > + .matches = {
> > > + DMI_MATCH(DMI_SYS_VENDOR, "Hampoo"),
> > > + DMI_MATCH(DMI_PRODUCT_NAME, "X1D3_C806N"),
> > > + },
> > > + },
> > > + {
> > > + /* Cube iWork8 Air */
> > > + .driver_data = (void *)cube_iwork8_air_fw,
> > > + .matches = {
> > > + DMI_MATCH(DMI_SYS_VENDOR, "cube"),
> > > + DMI_MATCH(DMI_PRODUCT_NAME, "i1-TF"),
> > > + DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
> > > + },
> > > + },
> > > + {
> > > + /* Pipo W2s */
> > > + .driver_data = (void *)pipo_w2s_fw,
> > > + .matches = {
> > > + DMI_MATCH(DMI_SYS_VENDOR, "PIPO"),
> > > + DMI_MATCH(DMI_PRODUCT_NAME, "W2S"),
> > > + },
> > > + },
> > > + {}
> > > +};
> >
> > Maintaining these on a separate file might be easier to maintain.
>
> Sure, I can move these to say:
>
> drivers/firmware/efi/embedded-firmware-table.c ?

Sure. So to be clear without the above mapping we won't be able to find
the firmware. Also, the above should imply we have a respective upstream
driver per entry ? If so can you annotate some how which driver?

Or better yet... maintaining the above seems rather painful. Why not just let
the driver list this on its own with a macro, this way we don't have such a
list? I think there are parsers for example of MODULE_FIRMWARE() and if a
driver lists it, and the driver requires the firmware on boot I think some
tools include the driver's firmware on initramfs. Could something similar be
done to construct such a table automatically given the drivers enabled only
with their respective macro issued?

This way also if no driver is enabled that needs this, the code can just be
disabled and we save some more bytes on the kernel.

> > > +
> > > +/*
> > > + * Note the efi_check_for_embedded_firmwares() code currently makes the
> > > + * following 2 assumptions. This may needs to be revisited if embedded firmware
> > > + * is found where this is not true:
> > > + * 1) The firmware is only found in EFI_BOOT_SERVICES_CODE memory segments
> > > + * 2) The firmware always starts at an offset which is a multiple of 8 bytes
> >
> > Who's defining this? Is this an agreed upon thing between a few companies, or
> > is this written as part of a standard which we can refer to in documentation.
>
> Definitely not part of the standard, this is just observed behavior on
> devices which have (interesting) peripheral firmware embedded in their EFI
> code.

Then best document very well.

> > > + */
> > > +static int __init efi_check_md_for_embedded_firmware(
> > > + efi_memory_desc_t *md, const struct embedded_fw_desc *desc)
> > > +{
> > > + u64 i, size;
> > > + u32 crc;
> > > + u8 *mem;
> > > +
> > > + size = md->num_pages << EFI_PAGE_SHIFT;
> > > + mem = memremap(md->phys_addr, size, MEMREMAP_WB);
> > > + if (!mem) {
> > > + pr_err("Error mapping EFI mem at %#llx\n", md->phys_addr);
> > > + return -ENOMEM;
> > > + }
> > > +
> > > + size -= desc->length;
> > > + for (i = 0; i < size; i += 8) {
> > > + if (*((u64 *)(mem + i)) != *((u64 *)desc->prefix))
> > > + continue;
> > > +
> > > + /* Seed with ~0, invert to match crc32 userspace utility */
> > > + crc = ~crc32(~0, mem + i, desc->length);
> > > + if (crc == desc->crc)
> > > + break;
> > > + }
> > > +
> > > + memunmap(mem);
> > > +
> > > + if (i >= size)
> > > + return -ENOENT;
> > > +
> > > + pr_info("Found EFI embedded fw '%s' crc %08x\n", desc->name, desc->crc);
> > > +
> > > + if (found_fw_count >= MAX_EMBEDDED_FIRMWARES) {
> > > + pr_err("Error already have %d embedded firmwares\n",
> > > + MAX_EMBEDDED_FIRMWARES);
> > > + return -ENOSPC;
> > > + }
> > > +
> > > + found_fw[found_fw_count].data =
> > > + memremap(md->phys_addr + i, desc->length, MEMREMAP_WB);
> >
> > I've heard of some firmware bing over hundreds of MB these days. Once
> > the can of worms is open its just a matter of time before someone
> > tries to abuse, so do we have any limitation size? How about spec
> > wise? Are there any limitations implied by it?
> >
> > If there are rather small, do we stand to gain instead to just kzalloc()
> > and memcpy the found firmware? If done this way, wouldn't you be able
> > to run this earlier?
>
> Using kmalloc still requires memory-management to be setup, just as
> using memremap does. The whole "needs to be run late" comment is
> about this needing to run after mm_init(). Anyways as said I think
> the whole when to run this discussion is a red herring based on my
> poor choice of words in the commit message.
>
> But doing a kmemdup on found firmware instead would avoid
> the need for efi_mem_reserve()...

Yay.

>
> > > + if (!found_fw[found_fw_count].data) {
> > > + pr_err("Error mapping embedded firmware\n");
> > > + return -ENOMEM;
> > > + }
> > > +
> > > + found_fw[found_fw_count].name = desc->name;
> > > + found_fw[found_fw_count].length = desc->length;
> > > + found_fw_count++;
> > > +
> > > + /* Note md points to *unmapped* memory after this!!! */
> > > + efi_mem_reserve(md->phys_addr + i, desc->length);
> >
> > Do you need a for_each_efi_memory_desc_safe() perhaps?
>
> See below.
>
> > > + return 0;
> > > +}
> > > +
> > > +void __init efi_check_for_embedded_firmwares(void)
> > > +{
> > > + const struct embedded_fw_desc *fw_desc;
> > > + const struct dmi_system_id *dmi_id;
> > > + efi_memory_desc_t *md;
> > > + int i, r;
> > > +
> > > + dmi_id = dmi_first_match(embedded_fw_table);
> > > + if (!dmi_id)
> > > + return;
> > > +
> > > + fw_desc = dmi_id->driver_data;
> > > + for (i = 0; fw_desc[i].length; i++) {
> > > + for_each_efi_memory_desc(md) {
> > > + if (md->type != EFI_BOOT_SERVICES_CODE)
> > > + continue;
> > > +
> > > + r = efi_check_md_for_embedded_firmware(md, &fw_desc[i]);
> > > + if (r == 0) {
> > > + /*
> > > + * On success efi_mem_reserve() has been called
> > > + * installing a new memmap, so our pointers
> > > + * are invalid now and we MUST break the loop.
> > > + */
> > > + break;
> >
> > Yeah this seems fragile. Can we do better?
>
> If we want to use efi_mem_reserve() no, because the memory descriptors
> are in an array and the entire array gets re-allocated on changes.
>
> Note AFAICT this MUST be an array because we pass it to the EFI firmware,
> but your suggestion to use kmemdup on the firmware would fix the need for
> efi_mem_reserve() fixing the fragility, so that probably is a better way
> to deal with this.

OK!

Luis
>
> Regards,
>
> Hans
>
>
> >
> > Luis
> >
> > > + }
> > > + }
> > > + }
> > > +}
> > > +
> > > +int efi_get_embedded_fw(const char *name, void **data, size_t *size,
> > > + size_t msize)
> > > +{
> > > + struct embedded_fw *fw = NULL;
> > > + void *buf = *data;
> > > + int i;
> > > +
> > > + for (i = 0; i < found_fw_count; i++) {
> > > + if (strcmp(name, found_fw[i].name) == 0) {
> > > + fw = &found_fw[i];
> > > + break;
> > > + }
> > > + }
> > > +
> > > + if (!fw)
> > > + return -ENOENT;
> > > +
> > > + if (msize && msize < fw->length)
> > > + return -EFBIG;
> > > +
> > > + if (!buf) {
> > > + buf = vmalloc(fw->length);
> > > + if (!buf)
> > > + return -ENOMEM;
> > > + }
> > > +
> > > + memcpy(buf, fw->data, fw->length);
> > > + *size = fw->length;
> > > + *data = buf;
> > > +
> > > + return 0;
> > > +}
> > > diff --git a/include/linux/efi.h b/include/linux/efi.h
> > > index f5083aa72eae..bbdfda1d9e8d 100644
> > > --- a/include/linux/efi.h
> > > +++ b/include/linux/efi.h
> > > @@ -1573,6 +1573,8 @@ efi_enable_reset_attack_mitigation(efi_system_table_t *sys_table_arg) { }
> > > #endif
> > > void efi_retrieve_tpm2_eventlog(efi_system_table_t *sys_table);
> > > +void efi_check_for_embedded_firmwares(void);
> > > +int efi_get_embedded_fw(const char *name, void **dat, size_t *sz, size_t msize);
> > > /*
> > > * Arch code can implement the following three template macros, avoiding
> > > diff --git a/init/main.c b/init/main.c
> > > index 969eaf140ef0..79b4a1b12509 100644
> > > --- a/init/main.c
> > > +++ b/init/main.c
> > > @@ -710,6 +710,7 @@ asmlinkage __visible void __init start_kernel(void)
> > > sfi_init_late();
> > > if (efi_enabled(EFI_RUNTIME_SERVICES)) {
> > > + efi_check_for_embedded_firmwares();
> > > efi_free_boot_services();
> > > }
> > > --
> > > 2.17.0.rc2
> > >
> > >
> >
>

--
Luis Rodriguez, SUSE LINUX GmbH
Maxfeldstrasse 5; D-90409 Nuernberg