[PATCH v8 1/2] of: Documentation: Specify local APIC ID in "reg"

From: Ivan Gorinov
Date: Thu Mar 22 2018 - 17:43:38 EST


Use the "reg" property to specify the processor's local APIC ID instead of
setting it to the CPU node index in Device Tree.

Local APIC ID is assigned by hardware and visible in the APIC ID register.
Some processor models allow APIC ID to be changed by software, but CPUID
instruction executed with %eax = 0x0b always returns the initial ID in %edx.

Local APIC ID does not match the node index in many systems.

Signed-off-by: Ivan Gorinov <ivan.gorinov@xxxxxxxxx>
---
Documentation/devicetree/bindings/x86/ce4100.txt | 37 ++++++++++++++++++------
1 file changed, 28 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/x86/ce4100.txt b/Documentation/devicetree/bindings/x86/ce4100.txt
index b49ae59..4bbfed1 100644
--- a/Documentation/devicetree/bindings/x86/ce4100.txt
+++ b/Documentation/devicetree/bindings/x86/ce4100.txt
@@ -7,17 +7,36 @@ Many of the "generic" devices like HPET or IO APIC have the ce4100
name in their compatible property because they first appeared in this
SoC.

-The CPU node
-------------
- cpu@0 {
- device_type = "cpu";
- compatible = "intel,ce4100";
- reg = <0>;
- lapic = <&lapic0>;
+The CPU nodes
+-------------
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0x00 {
+ device_type = "cpu";
+ compatible = "intel,ce4100";
+ reg = <0x00>;
+ };
+
+ cpu@0x02 {
+ device_type = "cpu";
+ compatible = "intel,ce4100";
+ reg = <0x02>;
+ };
};

-The reg property describes the CPU number. The lapic property points to
-the local APIC timer.
+A "cpu" node describes one logical processor (hardware thread).
+
+Required properties:
+
+- device_type
+ Device type, must be "cpu".
+
+- reg
+ Local APIC ID, the unique number assigned to each processor by
+ system hardware.

The SoC node
------------
--
2.7.4