Re: [PATCH i2c/slave-mqueue v1] i2c: slave-mqueue: add a slave backend to receive and queue messages
From: Wang, Haiyue
Date: Mon Mar 19 2018 - 21:44:25 EST
Thanks, Andy.
Hi Wolfram,
Let me introduce some development background, it is used for OpenBMC
project,
which belongs to the Linux Foundation now
(https://www.linuxfoundation.org/blog/openbmc-project-community-comes-together-at-the-linux-foundation-to-define-open-source-implementation-of-bmc-firmware-stack/).
1. *https://goo.gl/WgvPFi*
***
<https://goo.gl/WgvPFi>***https://lists.ozlabs.org/pipermail/openbmc/2018-January/010493.html*
<https://goo.gl/WgvPFi>*
**
*IPMI is embedded within IPMB (similar to KCS, BT?)*
*
*
Who started, who responded to messages
*
We need a kernel interface for handling a multi-master slave
*
Dell has a non-standard i2c IPMB interface
o
Kernel maintains table of outstanding commands
*
Brendan suggests we need a kernel driver for doing both MCTP and IPMB
*
We canât do them both in usersland as MCTP makes extensions to SMBUS
in order to allow arbitration. Problematic extension is the âMCTP
fairness arbitrationâ. Requires the i2c controllers on the bus
(masters/slaves) to observe the line for a certain period of time in
order to see who is using the line. Thereâs no userspace API for
this, and it the timing requirements are tight
*
Slave mode is not yet exposed to the user
*
As we donât have a userspace interface, it makes sense to add a new one
*
BR,
Haiyue
On 2018-03-20 03:32, Andy Shevchenko wrote:
On Sat, 2018-03-17 at 11:48 +0800, Haiyue Wang wrote:
Some protocols over I2C are designed for bi-directional transferring
messages by using I2C Master Write protocol. Like the MCTP (Management
Component Transport Protocol) and IPMB (Intelligent Platform
Management
Bus), they both require that the userspace can receive messages from
I2C dirvers under slave mode.
This new slave mqueue backend is used to receive and queue messages,
it
will exposes these messages to userspace by sysfs bin file.
Wolfram, I'm not sure this is the best approach, though I can't propose
anything else right now.
If you are satisfied with it, I give a formal
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Signed-off-by: Haiyue Wang <haiyue.wang@xxxxxxxxxxxxxxx>
---
Documentation/i2c/slave-mqueue-backend.rst | 125 ++++++++++++++++++
drivers/i2c/Kconfig | 13 ++
drivers/i2c/Makefile | 1 +
drivers/i2c/i2c-slave-mqueue.c | 202
+++++++++++++++++++++++++++++
4 files changed, 341 insertions(+)
create mode 100644 Documentation/i2c/slave-mqueue-backend.rst
create mode 100644 drivers/i2c/i2c-slave-mqueue.c
diff --git a/Documentation/i2c/slave-mqueue-backend.rst
b/Documentation/i2c/slave-mqueue-backend.rst
new file mode 100644
index 0000000..69d6437
--- /dev/null
+++ b/Documentation/i2c/slave-mqueue-backend.rst
@@ -0,0 +1,125 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+Linux I2C slave message queue backend
+=====================================
+
+:Author: Haiyue Wang <haiyue.wang@xxxxxxxxxxxxxxx>
+
+Some protocols over I2C/SMBus are designed for bi-directional
transferring
+messages by using I2C Master Write protocol. This requires that both
sides
+of the communication have slave addresses.
+
+Like MCTP (Management Component Transport Protocol) and IPMB
(Intelligent
+Platform Management Bus), they both require that the userspace can
receive
+messages from i2c dirvers under slave mode.
+
+This I2C slave mqueue (message queue) backend is used to receive and
queue
+messages from the remote i2c intelligent device; and it will add the
target
+slave address (with R/W# bit is always 0) into the message at the
first byte,
+so that userspace can use this byte to dispatch the messages into
different
+handling modules. Also, like IPMB, the address byte is in its message
format,
+it needs it to do checksum.
+
+For messages are time related, so this backend will flush the oldest
message
+to queue the newest one.
+
+Link
+----
+`Intelligent Platform Management Bus
+Communications Protocol Specification
+<https://www.intel.com/content/dam/www/public/us/en/documents/product
-briefs/ipmp-spec-v1.0.pdf>`_
+
+`Management Component Transport Protocol (MCTP)
+SMBus/I2C Transport Binding Specification
+<https://www.dmtf.org/sites/default/files/standards/documents/DSP0237
_1.1.0.pdf>`_
+
+How to use
+----------
+For example, the I2C5 bus has slave address 0x10, bellowing command
will create
+the related message queue interface:
+
+ echo slave-mqueue 0x1010 > /sys/bus/i2c/devices/i2c-5/new_device
+
+Then you can dump the messages like this:
+
+ hexdump -C /sys/bus/i2c/devices/5-1010/slave-mqueue
+
+Code Example
+------------
+*Note: call 'lseek' before 'read', this is a requirement from kernfs'
design.*
+
+::
+
+ #include <sys/types.h>
+ #include <sys/stat.h>
+ #include <unistd.h>
+ #include <poll.h>
+ #include <time.h>
+ #include <fcntl.h>
+ #include <stdio.h>
+
+ int main(int argc, char *argv[])
+ {
+ int i, r;
+ struct pollfd pfd;
+ struct timespec ts;
+ unsigned char data[256];
+
+ pfd.fd = open(argv[1], O_RDONLY | O_NONBLOCK);
+ if (pfd.fd < 0)
+ return -1;
+
+ pfd.events = POLLPRI;
+
+ while (1) {
+ r = poll(&pfd, 1, 5000);
+
+ if (r < 0)
+ break;
+
+ if (r == 0 || !(pfd.revents & POLLPRI))
+ continue;
+
+ lseek(pfd.fd, 0, SEEK_SET);
+ r = read(pfd.fd, data, sizeof(data));
+ if (r <= 0)
+ continue;
+
+ clock_gettime(CLOCK_MONOTONIC, &ts);
+ printf("[%ld.%.9ld] :", ts.tv_sec, ts.tv_nsec);
+ for (i = 0; i < r; i++)
+ printf(" %02x", data[i]);
+ printf("\n");
+ }
+
+ close(pfd.fd);
+
+ return 0;
+ }
+
+Result
+------
+*./a.out "/sys/bus/i2c/devices/5-1010/slave-mqueue"*
+
+::
+
+ [10183.232500449] : 20 18 c8 2c 78 01 5b
+ [10183.479358348] : 20 18 c8 2c 78 01 5b
+ [10183.726556812] : 20 18 c8 2c 78 01 5b
+ [10183.972605863] : 20 18 c8 2c 78 01 5b
+ [10184.220124772] : 20 18 c8 2c 78 01 5b
+ [10184.467764166] : 20 18 c8 2c 78 01 5b
+ [10193.233421784] : 20 18 c8 2c 7c 01 57
+ [10193.480273460] : 20 18 c8 2c 7c 01 57
+ [10193.726788733] : 20 18 c8 2c 7c 01 57
+ [10193.972781945] : 20 18 c8 2c 7c 01 57
+ [10194.220487360] : 20 18 c8 2c 7c 01 57
+ [10194.468089259] : 20 18 c8 2c 7c 01 57
+ [10203.233433099] : 20 18 c8 2c 80 01 53
+ [10203.481058715] : 20 18 c8 2c 80 01 53
+ [10203.727610472] : 20 18 c8 2c 80 01 53
+ [10203.974044856] : 20 18 c8 2c 80 01 53
+ [10204.220734634] : 20 18 c8 2c 80 01 53
+ [10204.468461664] : 20 18 c8 2c 80 01 53
+
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index efc3354..7053b5b 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -118,6 +118,19 @@ if I2C_SLAVE
config I2C_SLAVE_EEPROM
tristate "I2C eeprom slave driver"
+config I2C_SLAVE_MQUEUE
+ tristate "I2C mqueue (message queue) slave driver"
+ help
+ Some protocols over I2C are designed for bi-directional
transferring
+ messages by using I2C Master Write protocol. This driver is
used to
+ receive and queue messages from the remote I2C device.
+
+ Userspace can get the messages by reading sysfs file that
this driver
+ exposes.
+
+ This support is also available as a module. If so, the
module will be
+ called i2c-slave-mqueue.
+
endif
config I2C_DEBUG_CORE
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 72c94c6..7ec287b 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_I2C_MUX) += i2c-mux.o
obj-y += algos/ busses/ muxes/
obj-$(CONFIG_I2C_STUB) += i2c-stub.o
obj-$(CONFIG_I2C_SLAVE_EEPROM) += i2c-slave-eeprom.o
+obj-$(CONFIG_I2C_SLAVE_MQUEUE) += i2c-slave-mqueue.o
ccflags-$(CONFIG_I2C_DEBUG_CORE) := -DDEBUG
CFLAGS_i2c-core-base.o := -Wno-deprecated-declarations
diff --git a/drivers/i2c/i2c-slave-mqueue.c b/drivers/i2c/i2c-slave-
mqueue.c
new file mode 100644
index 0000000..a486e85
--- /dev/null
+++ b/drivers/i2c/i2c-slave-mqueue.c
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017 - 2018, Intel Corporation.
+
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/sysfs.h>
+
+#define MQ_MSGBUF_SIZE 128
+#define MQ_QUEUE_SIZE 32
+#define MQ_QUEUE_NEXT(x) (((x) + 1) & (MQ_QUEUE_SIZE - 1))
+
+struct mq_msg {
+ int len;
+ u8 *buf;
+};
+
+struct mq_queue {
+ struct bin_attribute bin;
+ struct kernfs_node *kn;
+
+ spinlock_t lock; /* spinlock for queue index
handling */
+ int in;
+ int out;
+
+ struct mq_msg *curr;
+ int truncated; /* drop current if
truncated */
+ struct mq_msg queue[MQ_QUEUE_SIZE];
+};
+
+static int i2c_slave_mqueue_callback(struct i2c_client *client,
+ enum i2c_slave_event event, u8
*val)
+{
+ struct mq_queue *mq = i2c_get_clientdata(client);
+ struct mq_msg *msg = mq->curr;
+ int ret = 0;
+
+ switch (event) {
+ case I2C_SLAVE_WRITE_REQUESTED:
+ mq->truncated = 0;
+
+ msg->len = 1;
+ msg->buf[0] = client->addr << 1;
+ break;
+
+ case I2C_SLAVE_WRITE_RECEIVED:
+ if (msg->len < MQ_MSGBUF_SIZE) {
+ msg->buf[msg->len++] = *val;
+ } else {
+ dev_err(&client->dev, "message is
truncated!\n");
+ mq->truncated = 1;
+ ret = -EINVAL;
+ }
+ break;
+
+ case I2C_SLAVE_STOP:
+ if (unlikely(mq->truncated))
+ break;
+
+ spin_lock(&mq->lock);
+ mq->in = MQ_QUEUE_NEXT(mq->in);
+ mq->curr = &mq->queue[mq->in];
+
+ /* Flush the oldest message */
+ if (mq->out == mq->in)
+ mq->out = MQ_QUEUE_NEXT(mq->out);
+ spin_unlock(&mq->lock);
+
+ kernfs_notify(mq->kn);
+ break;
+
+ default:
+ *val = 0xFF;
+ break;
+ }
+
+ return ret;
+}
+
+static ssize_t i2c_slave_mqueue_bin_read(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *attr,
+ char *buf, loff_t pos,
size_t count)
+{
+ struct mq_queue *mq;
+ struct mq_msg *msg;
+ unsigned long flags;
+ bool more = false;
+ ssize_t ret = 0;
+
+ mq = dev_get_drvdata(container_of(kobj, struct device,
kobj));
+
+ spin_lock_irqsave(&mq->lock, flags);
+ if (mq->out != mq->in) {
+ msg = &mq->queue[mq->out];
+
+ if (msg->len <= count) {
+ ret = msg->len;
+ memcpy(buf, msg->buf, ret);
+ } else {
+ ret = -EOVERFLOW; /* Drop this HUGE one. */
+ }
+
+ mq->out = MQ_QUEUE_NEXT(mq->out);
+ if (mq->out != mq->in)
+ more = true;
+ }
+ spin_unlock_irqrestore(&mq->lock, flags);
+
+ if (more)
+ kernfs_notify(mq->kn);
+
+ return ret;
+}
+
+static int i2c_slave_mqueue_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct mq_queue *mq;
+ int ret, i;
+ void *buf;
+
+ mq = devm_kzalloc(dev, sizeof(*mq), GFP_KERNEL);
+ if (!mq)
+ return -ENOMEM;
+
+ BUILD_BUG_ON(!is_power_of_2(MQ_QUEUE_SIZE));
+
+ buf = devm_kmalloc_array(dev, MQ_QUEUE_SIZE, MQ_MSGBUF_SIZE,
+ GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ for (i = 0; i < MQ_QUEUE_SIZE; i++)
+ mq->queue[i].buf = buf + i * MQ_MSGBUF_SIZE;
+
+ i2c_set_clientdata(client, mq);
+
+ spin_lock_init(&mq->lock);
+ mq->curr = &mq->queue[0];
+
+ sysfs_bin_attr_init(&mq->bin);
+ mq->bin.attr.name = "slave-mqueue";
+ mq->bin.attr.mode = 0400;
+ mq->bin.read = i2c_slave_mqueue_bin_read;
+ mq->bin.size = MQ_MSGBUF_SIZE * MQ_QUEUE_SIZE;
+
+ ret = sysfs_create_bin_file(&dev->kobj, &mq->bin);
+ if (ret)
+ return ret;
+
+ mq->kn = kernfs_find_and_get(dev->kobj.sd, mq-
bin.attr.name);
+ if (!mq->kn) {
+ sysfs_remove_bin_file(&dev->kobj, &mq->bin);
+ return -EFAULT;
+ }
+
+ ret = i2c_slave_register(client, i2c_slave_mqueue_callback);
+ if (ret) {
+ kernfs_put(mq->kn);
+ sysfs_remove_bin_file(&dev->kobj, &mq->bin);
+ return ret;
+ }
+
+ return 0;
+};
+
+static int i2c_slave_mqueue_remove(struct i2c_client *client)
+{
+ struct mq_queue *mq = i2c_get_clientdata(client);
+
+ i2c_slave_unregister(client);
+
+ kernfs_put(mq->kn);
+ sysfs_remove_bin_file(&client->dev.kobj, &mq->bin);
+
+ return 0;
+}
+
+static const struct i2c_device_id i2c_slave_mqueue_id[] = {
+ { "slave-mqueue", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, i2c_slave_mqueue_id);
+
+static struct i2c_driver i2c_slave_mqueue_driver = {
+ .driver = {
+ .name = "i2c-slave-mqueue",
+ },
+ .probe = i2c_slave_mqueue_probe,
+ .remove = i2c_slave_mqueue_remove,
+ .id_table = i2c_slave_mqueue_id,
+};
+module_i2c_driver(i2c_slave_mqueue_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Haiyue Wang <haiyue.wang@xxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("I2C slave mode for receiving and queuing
messages");