[PATCH] spi: jcore: disable clock on remove

From: Alexey Khoroshilov
Date: Fri Mar 16 2018 - 18:21:40 EST


The driver does not disable ref_clk on remove.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
---
drivers/spi/spi-jcore.c | 26 ++++++++++++++++++++------
1 file changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-jcore.c b/drivers/spi/spi-jcore.c
index dafed6280df3..68cac15ff54a 100644
--- a/drivers/spi/spi-jcore.c
+++ b/drivers/spi/spi-jcore.c
@@ -38,6 +38,7 @@ struct jcore_spi {
unsigned int speed_reg;
unsigned int speed_hz;
unsigned int clock_freq;
+ struct clk *clk;
};

static int jcore_spi_wait(void __iomem *ctrl_reg)
@@ -143,7 +144,6 @@ static int jcore_spi_probe(struct platform_device *pdev)
struct spi_master *master;
struct resource *res;
u32 clock_freq;
- struct clk *clk;
int err = -ENODEV;

master = spi_alloc_master(&pdev->dev, sizeof(struct jcore_spi));
@@ -183,10 +183,10 @@ static int jcore_spi_probe(struct platform_device *pdev)
* requested rate. If the clock is omitted, 50 MHz is assumed.
*/
clock_freq = 50000000;
- clk = devm_clk_get(&pdev->dev, "ref_clk");
- if (!IS_ERR_OR_NULL(clk)) {
- if (clk_enable(clk) == 0)
- clock_freq = clk_get_rate(clk);
+ hw->clk = devm_clk_get(&pdev->dev, "ref_clk");
+ if (!IS_ERR_OR_NULL(hw->clk)) {
+ if (clk_enable(hw->clk) == 0)
+ clock_freq = clk_get_rate(hw->clk);
else
dev_warn(&pdev->dev, "could not enable ref_clk\n");
}
@@ -199,7 +199,7 @@ static int jcore_spi_probe(struct platform_device *pdev)
/* Register our spi controller */
err = devm_spi_register_master(&pdev->dev, master);
if (err) {
- clk_disable(clk);
+ clk_disable(hw->clk);
goto exit;
}

@@ -212,6 +212,19 @@ static int jcore_spi_probe(struct platform_device *pdev)
return err;
}

+static int jcore_spi_remove(struct platform_device *pdev)
+{
+ struct spi_master *master;
+ struct jcore_spi *hw;
+
+ master = platform_get_drvdata(pdev);
+ hw = spi_master_get_devdata(master);
+
+ clk_disable(hw->clk);
+
+ return 0;
+}
+
static const struct of_device_id jcore_spi_of_match[] = {
{ .compatible = "jcore,spi2" },
{},
@@ -220,6 +233,7 @@ MODULE_DEVICE_TABLE(of, jcore_spi_of_match);

static struct platform_driver jcore_spi_driver = {
.probe = jcore_spi_probe,
+ .remove = jcore_spi_remove,
.driver = {
.name = DRV_NAME,
.of_match_table = jcore_spi_of_match,
--
2.7.4