Re: [PATCH v2 2/2] reset: stm32mp1: Enable stm32mp1 reset driver

From: Gabriel FERNANDEZ
Date: Fri Mar 16 2018 - 10:36:34 EST



Hi Philipp,

Thanks for reviewing.

On 03/16/2018 02:29 PM, Philipp Zabel wrote:
> Hi Gabriel,
>
> this looks mostly good to me, a few questions and comments below:
>
> On Wed, 2018-03-14 at 17:30 +0100, gabriel.fernandez@xxxxxx wrote:
>> From: Gabriel Fernandez <gabriel.fernandez@xxxxxx>
>>
>> stm32mp1 RCC IP 1 has a reset SET register and a reset CLEAR register.
>>
>> Writing '0' on reset SET register has no effect
>> Writing '1' on reset SET register
>> activates the reset of the corresponding peripheral
>>
>> Writing '0' on reset CLEAR register has no effect
>> Writing '1' on reset CLEAR register
>> releases the reset of the corresponding peripheral
>>
>> See Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt
>>
>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@xxxxxx>
>> ---
>> drivers/reset/Kconfig | 6 ++
>> drivers/reset/Makefile | 1 +
>> drivers/reset/reset-stm32mp1.c | 122 +++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 129 insertions(+)
>> create mode 100644 drivers/reset/reset-stm32mp1.c
>>
>> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
>> index 1efbc6c..c0b292b 100644
>> --- a/drivers/reset/Kconfig
>> +++ b/drivers/reset/Kconfig
>> @@ -97,6 +97,12 @@ config RESET_SIMPLE
>> - Allwinner SoCs
>> - ZTE's zx2967 family
>>
>> +config RESET_STM32MP157
>> + bool "STM32MP157 Reset Driver" if COMPILE_TEST
>> + default MACH_STM32MP157
>> + help
>> + This enables the RCC reset controller driver for STM32 MPUs.
>> +
>> config RESET_SUNXI
>> bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
>> default ARCH_SUNXI
>> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
>> index 132c24f..c1261dc 100644
>> --- a/drivers/reset/Makefile
>> +++ b/drivers/reset/Makefile
>> @@ -15,6 +15,7 @@ obj-$(CONFIG_RESET_MESON) += reset-meson.o
>> obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
>> obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
>> obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
>> +obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o
>> obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
>> obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
>> obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
>> diff --git a/drivers/reset/reset-stm32mp1.c b/drivers/reset/reset-stm32mp1.c
>> new file mode 100644
>> index 0000000..5e25388
>> --- /dev/null
>> +++ b/drivers/reset/reset-stm32mp1.c
>> @@ -0,0 +1,122 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
>> + * Author: Gabriel Fernandez <gabriel.fernandez@xxxxxx> for STMicroelectronics.
>> + */
>> +
>> +#include <linux/arm-smccc.h>
> This does not seem to be necessary.
right
>> +#include <linux/device.h>
>> +#include <linux/err.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
> This does not seem to be necessary either.
ok
>> +#include <linux/platform_device.h>
>> +#include <linux/reset-controller.h>
>> +
>> +#define CLR_OFFSET 0x4
>> +
>> +struct stm32_reset_data {
>> + struct reset_controller_dev rcdev;
>> + void __iomem *membase;
>> +};
>> +
>> +static inline struct stm32_reset_data *
>> +to_stm32_reset_data(struct reset_controller_dev *rcdev)
>> +{
>> + return container_of(rcdev, struct stm32_reset_data, rcdev);
>> +}
>> +
>> +static int stm32_reset_update(struct reset_controller_dev *rcdev,
>> + unsigned long id, bool assert)
>> +{
>> + struct stm32_reset_data *data = to_stm32_reset_data(rcdev);
>> + int reg_width = sizeof(u32);
>> + int bank = id / (reg_width * BITS_PER_BYTE);
>> + int offset = id % (reg_width * BITS_PER_BYTE);
>> + void __iomem *addr;
>> +
>> + addr = data->membase + (bank * reg_width);
>> + if (!assert)
>> + addr += CLR_OFFSET;
>> +
>> + writel(BIT(offset), addr);
>> +
>> + return 0;
>> +}
>> +
>> +static int stm32_reset_assert(struct reset_controller_dev *rcdev,
>> + unsigned long id)
>> +{
>> + return stm32_reset_update(rcdev, id, true);
>> +}
>> +
>> +static int stm32_reset_deassert(struct reset_controller_dev *rcdev,
>> + unsigned long id)
>> +{
>> + return stm32_reset_update(rcdev, id, false);
>> +}
>> +
>> +static int stm32_reset_status(struct reset_controller_dev *rcdev,
>> + unsigned long id)
>> +{
>> + struct stm32_reset_data *data = to_stm32_reset_data(rcdev);
>> + int reg_width = sizeof(u32);
>> + int bank = id / (reg_width * BITS_PER_BYTE);
>> + int offset = id % (reg_width * BITS_PER_BYTE);
>> + u32 reg;
>> +
>> + reg = readl(data->membase + (bank * reg_width));
>> +
>> + return !(reg & BIT(offset));
>> +}
> So the SET register can be read back and returns 0 for reset lines that
> are currently asserted and returns 1 for reset lines that are currently
> deasserted?
yes you have spotted a error, i will replace by'return !!(reg &
BIT(offset));'
>> +
>> +const struct reset_control_ops stm32_reset_ops = {
>> + .assert = stm32_reset_assert,
>> + .deassert = stm32_reset_deassert,
>> + .status = stm32_reset_status,
>> +};
>> +
>> +static const struct of_device_id stm32_reset_dt_ids[] = {
>> + { .compatible = "st,stm32mp1-rcc"},
>> + { /* sentinel */ },
>> +};
> From the DT bindings it looks like the clock and reset drivers are
> sharing the same node. Is there just no clock platform_driver at all?
there is one hardware block that is used for clock, reset and power,
they share the same node but each have it own platform_driver

>> +
>> +static int stm32_reset_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct stm32_reset_data *data;
>> + void __iomem *membase;
>> + struct resource *res;
>> +
>> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
>> + if (!data)
>> + return -ENOMEM;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + membase = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(membase))
>> + return PTR_ERR(membase);
>> +
>> + data->membase = membase;
>> + data->rcdev.owner = THIS_MODULE;
>> + data->rcdev.nr_resets = resource_size(res) * BITS_PER_BYTE;
>> + data->rcdev.ops = &stm32_reset_ops;
>> + data->rcdev.of_node = dev->of_node;
>> +
>> + return devm_reset_controller_register(dev, &data->rcdev);
>> +}
>> +
>> +static struct platform_driver stm32_reset_driver = {
>> + .probe = stm32_reset_probe,
>> + .driver = {
>> + .name = "stm32mp1-reset",
>> + .of_match_table = stm32_reset_dt_ids,
>> + },
>> +};
>> +
>> +static int __init stm32_reset_init(void)
>> +{
>> + return platform_driver_register(&stm32_reset_driver);
>> +}
>> +
>> +postcore_initcall(stm32_reset_init);
> Isn't builtin_platform_driver early enough?
ok

Best Regards

Gabriel

>
> regards
> Philipp