Re: [PATCH V2] Input: pm8941-pwrkey: add resin key capabilities

From: Dmitry Torokhov
Date: Wed Mar 14 2018 - 12:43:56 EST


On Tue, Mar 13, 2018 at 07:40:48PM -0700, Bjorn Andersson wrote:
> On Tue 13 Mar 01:35 PDT 2018, Tirupathi Reddy wrote:
>
> > Add resin key support to handle different types of key events
> > defined in different platforms.
> >
> > Signed-off-by: Tirupathi Reddy <tirupath@xxxxxxxxxxxxxx>
> > ---
> > .../bindings/input/qcom,pm8941-pwrkey.txt | 20 ++++++-
> > drivers/input/misc/pm8941-pwrkey.c | 65 +++++++++++++++++++++-
> > 2 files changed, 83 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> > index 07bf55f..f499cf8 100644
> > --- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> > +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> > @@ -20,6 +20,14 @@ PROPERTIES
> > defined by the binding document describing the node's
> > interrupt parent.
> >
> > +- interrupt-names:
> > + Usage: required
> > + Value type: <stringlist>
> > + Definition: Interrupt names. This list must match up 1-to-1 with the
> > + interrupts specified in the 'interrupts' property. "kpdpwr"
> > + must be specified and should be the first entry of the list.
> > + "resin" may be specified for some platforms.
> > +
> > - debounce:
> > Usage: optional
> > Value type: <u32>
> > @@ -32,12 +40,22 @@ PROPERTIES
> > Definition: presence of this property indicates that the KPDPWR_N pin
> > should be configured for pull up.
> >
> > +- linux,code:
> > + Usage: required for "resin" key
> > + Value type: <u32>
> > + Definition: The input key-code associated with the resin key.
> > + Use the linux event codes defined in
> > + include/dt-bindings/input/linux-event-codes.h
>
> For completeness sake I think this should list both the key code for the
> power key and for the RESIN key.
>
> > +
> > EXAMPLE
> >
> > pwrkey@800 {
> > compatible = "qcom,pm8941-pwrkey";
> > reg = <0x800>;
> > - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> > + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>,
> > + <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
> > + interrupt-names = "kpdpwr", "resin";
> > debounce = <15625>;
> > bias-pull-up;
>
> Do we need to support defining the bias for the resin as well?
>
> Perhaps it makes more sense to describe the RESIN key with a separate
> compatible and define that in a node of its own (we can still implement
> this in the same driver - if there's any chance of reuse...).
>
> > + linux,code = <KEY_VOLUMEDOWN>;
> > };
> > diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
> > index 18ad956..2fffc7c 100644
> > --- a/drivers/input/misc/pm8941-pwrkey.c
> > +++ b/drivers/input/misc/pm8941-pwrkey.c
> > @@ -28,6 +28,7 @@
> >
> > #define PON_RT_STS 0x10
> > #define PON_KPDPWR_N_SET BIT(0)
> > +#define PON_RESIN_N_SET BIT(1)
> >
> > #define PON_PS_HOLD_RST_CTL 0x5a
> > #define PON_PS_HOLD_RST_CTL2 0x5b
> > @@ -46,6 +47,7 @@
> > struct pm8941_pwrkey {
> > struct device *dev;
> > int irq;
> > + u32 resin_key_code;
> > u32 baseaddr;
> > struct regmap *regmap;
> > struct input_dev *input;
> > @@ -130,6 +132,24 @@ static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data)
> > return IRQ_HANDLED;
> > }
> >
> > +static irqreturn_t pm8941_resinkey_irq(int irq, void *_data)
> > +{
> > + struct pm8941_pwrkey *pwrkey = _data;
> > + unsigned int sts;
> > + int error;
> > +
> > + error = regmap_read(pwrkey->regmap,
> > + pwrkey->baseaddr + PON_RT_STS, &sts);
>
> This needs to be broken because the line is 81 chars long, if you use a
> shorter name for the return value (e.g. "ret") you don't need to do
> this.

I prefer keeping it as "error" please.

>
> > + if (error)
> > + return IRQ_HANDLED;
> > +
> > + input_report_key(pwrkey->input, pwrkey->resin_key_code,
> > + !!(sts & PON_RESIN_N_SET));
>
> Put pwrkey->resin_key_code in a local variable named "key" (or even
> key_code) and you don't need to line wrap this one.
>
> > + input_sync(pwrkey->input);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
>
> Regards,
> Bjorn

--
Dmitry