Re: [PATCH 06/47] net: smsc: remove m32r specific smc91x configuration

[Nicolas Pitre]

On Wed, 14 Mar 2018, Arnd Bergmann wrote:

> The m32r architecture is getting removed, so this part can be
> cleaned up as well.
> 
> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>

Acked-by: Nicolas Pitre <nico@xxxxxxxxxxx>

> ---
>  drivers/net/ethernet/smsc/Kconfig  |  4 ++--
>  drivers/net/ethernet/smsc/smc91x.h | 26 --------------------------
>  2 files changed, 2 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
> index 4c2f612e4414..1c2b6663f7ce 100644
> --- a/drivers/net/ethernet/smsc/Kconfig
> +++ b/drivers/net/ethernet/smsc/Kconfig
> @@ -37,8 +37,8 @@ config SMC91X
>  	select CRC32
>  	select MII
>  	depends on !OF || GPIOLIB
> -	depends on ARM || ARM64 || ATARI_ETHERNAT || BLACKFIN || COLDFIRE || \
> -		   M32R || MIPS || MN10300 || NIOS2 || SUPERH || XTENSA || H8300
> +	depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \
> +		   MIPS || NIOS2 || SUPERH || XTENSA || H8300
>  	---help---
>  	  This is a driver for SMC's 91x series of Ethernet chipsets,
>  	  including the SMC91C94 and the SMC91C111. Say Y if you want it
> diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h
> index 08b17adf0a65..b337ee97e0c0 100644
> --- a/drivers/net/ethernet/smsc/smc91x.h
> +++ b/drivers/net/ethernet/smsc/smc91x.h
> @@ -144,32 +144,6 @@ static inline void _SMC_outw_align4(u16 val, void __iomem *ioaddr, int reg,
>  
>  #define SMC_IRQ_FLAGS		(0)
>  
> -#elif   defined(CONFIG_M32R)
> -
> -#define SMC_CAN_USE_8BIT	0
> -#define SMC_CAN_USE_16BIT	1
> -#define SMC_CAN_USE_32BIT	0
> -
> -#define SMC_inb(a, r)		inb(((u32)a) + (r))
> -#define SMC_inw(a, r)		inw(((u32)a) + (r))
> -#define SMC_outb(v, a, r)	outb(v, ((u32)a) + (r))
> -#define SMC_outw(lp, v, a, r)	outw(v, ((u32)a) + (r))
> -#define SMC_insw(a, r, p, l)	insw(((u32)a) + (r), p, l)
> -#define SMC_outsw(a, r, p, l)	outsw(((u32)a) + (r), p, l)
> -
> -#define SMC_IRQ_FLAGS		(0)
> -
> -#define RPC_LSA_DEFAULT		RPC_LED_TX_RX
> -#define RPC_LSB_DEFAULT		RPC_LED_100_10
> -
> -#elif defined(CONFIG_MN10300)
> -
> -/*
> - * MN10300/AM33 configuration
> - */
> -
> -#include <unit/smc91111.h>
> -
>  #elif defined(CONFIG_ATARI)
>  
>  #define SMC_CAN_USE_8BIT        1
> -- 
> 2.9.0
> 
>