Re: [PATCH] X86/KVM: Update the exit_qualification access bits while walking an address

From: Raslan, KarimAllah
Date: Mon Mar 12 2018 - 04:56:01 EST


On Mon, 2018-03-12 at 08:52 +0000, Raslan, KarimAllah wrote:
> On Sun, 2018-03-04 at 10:17 +0000, Raslan, KarimAllah wrote:
> >
> > On Fri, 2018-03-02 at 18:41 +0100, Paolo Bonzini wrote:
> > >
> > >
> > > On 28/02/2018 19:06, KarimAllah Ahmed wrote:
> > > >
> > > >
> > > >
> > > > ... to avoid having a stale value when handling an EPT misconfig for MMIO
> > > > regions.
> > > >
> > > > MMIO regions that are not passed-through to the guest are handled through
> > > > EPT misconfigs. The first time a certain MMIO page is touched it causes an
> > > > EPT violation, then KVM marks the EPT entry to cause an EPT misconfig
> > > > instead. Any subsequent accesses to the entry will generate an EPT
> > > > misconfig.
> > > >
> > > > Things gets slightly complicated with nested guest handling for MMIO
> > > > regions that are not passed through from L0 (i.e. emulated by L0
> > > > user-space).
> > > >
> > > > An EPT violation for one of these MMIO regions from L2, exits to L0
> > > > hypervisor. L0 would then look at the EPT12 mapping for L1 hypervisor and
> > > > realize it is not present (or not sufficient to serve the request). Then L0
> > > > injects an EPT violation to L1. L1 would then update its EPT mappings. The
> > > > EXIT_QUALIFICATION value for L1 would come from exit_qualification variable
> > > > in "struct vcpu". The problem is that this variable is only updated on EPT
> > > > violation and not on EPT misconfig. So if an EPT violation because of a
> > > > read happened first, then an EPT misconfig because of a write happened
> > > > afterwards. The L0 hypervisor will still contain exit_qualification value
> > > > from the previous read instead of the write and end up injecting an EPT
> > > > violation to the L1 hypervisor with an out of date EXIT_QUALIFICATION.
> > > >
> > > > The EPT violation that is injected from L0 to L1 needs to have the correct
> > > > EXIT_QUALIFICATION specially for the access bits because the individual
> > > > access bits for MMIO EPTs are updated only on actual access of this
> > > > specific type. So for the example above, the L1 hypervisor will keep
> > > > updating only the read bit in the EPT then resume the L2 guest. The L2
> > > > guest would end up causing another exit where the L0 *again* will inject
> > > > another EPT violation to L1 hypervisor with *again* an out of date
> > > > exit_qualification which indicates a read and not a write. Then this
> > > > ping-pong just keeps happening without making any forward progress.
> > > >
> > > > The behavior of mapping MMIO regions changed in:
> > > >
> > > > commit a340b3e229b24 ("kvm: Map PFN-type memory regions as writable (if possible)")
> > > >
> > > > ... where an EPT violation for a read would also fixup the write bits to
> > > > avoid another EPT violation which by acciddent would fix the bug mentioned
> > > > above.
> > > >
> > > > This commit fixes this situation and ensures that the access bits for the
> > > > exit_qualifcation is up to date. That ensures that even L1 hypervisor
> > > > running with a KVM version before the commit mentioned above would still
> > > > work.
> > > >
> > > > ( The description above assumes EPT to be available and used by L1
> > > > hypervisor + the L1 hypervisor is passing through the MMIO region to the L2
> > > > guest while this MMIO region is emulated by the L0 user-space ).
> > >
> > > This looks okay. Would it be possible to add a kvm-unit-tests testcase
> > > for this?
> >
> > Yup, makes sense. Just sent out a patch for kvm-unit-tests.
>
> Was the kvm-unit-test that I posted sufficient?

Never mind, I just noticed that Radim already pulled this fix to theÂ
kvm/queue.

Thanks Radim :)

>
> >
> >
> > Thanks.
> >
> > >
> > >
> > >
> > > Thanks,
> > >
> > > Paolo
> > >
> > > >
> > > >
> > > >
> > > > Cc: Paolo Bonzini <pbonzini@xxxxxxxxxx>
> > > > Cc: Radim KrÄmÃÅ <rkrcmar@xxxxxxxxxx>
> > > > Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> > > > Cc: Ingo Molnar <mingo@xxxxxxxxxx>
> > > > Cc: H. Peter Anvin <hpa@xxxxxxxxx>
> > > > Cc: x86@xxxxxxxxxx
> > > > Cc: kvm@xxxxxxxxxxxxxxx
> > > > Cc: linux-kernel@xxxxxxxxxxxxxxx
> > > > Signed-off-by: KarimAllah Ahmed <karahmed@xxxxxxxxx>
> > > > ---
> > > > arch/x86/kvm/paging_tmpl.h | 11 +++++++++--
> > > > 1 file changed, 9 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
> > > > index 5abae72..6288e9d 100644
> > > > --- a/arch/x86/kvm/paging_tmpl.h
> > > > +++ b/arch/x86/kvm/paging_tmpl.h
> > > > @@ -452,14 +452,21 @@ static int FNAME(walk_addr_generic)(struct guest_walker *walker,
> > > > * done by is_rsvd_bits_set() above.
> > > > *
> > > > * We set up the value of exit_qualification to inject:
> > > > - * [2:0] - Derive from [2:0] of real exit_qualification at EPT violation
> > > > + * [2:0] - Derive from the access bits. The exit_qualification might be
> > > > + * out of date if it is serving an EPT misconfiguration.
> > > > * [5:3] - Calculated by the page walk of the guest EPT page tables
> > > > * [7:8] - Derived from [7:8] of real exit_qualification
> > > > *
> > > > * The other bits are set to 0.
> > > > */
> > > > if (!(errcode & PFERR_RSVD_MASK)) {
> > > > - vcpu->arch.exit_qualification &= 0x187;
> > > > + vcpu->arch.exit_qualification &= 0x180;
> > > > + if (write_fault)
> > > > + vcpu->arch.exit_qualification |= EPT_VIOLATION_ACC_WRITE;
> > > > + if (user_fault)
> > > > + vcpu->arch.exit_qualification |= EPT_VIOLATION_ACC_READ;
> > > > + if (fetch_fault)
> > > > + vcpu->arch.exit_qualification |= EPT_VIOLATION_ACC_INSTR;
> > > > vcpu->arch.exit_qualification |= (pte_access & 0x7) << 3;
> > > > }
> > > > #endif
> > > >
> > >
> > >
Amazon Development Center Germany GmbH
Berlin - Dresden - Aachen
main office: Krausenstr. 38, 10117 Berlin
Geschaeftsfuehrer: Dr. Ralf Herbrich, Christian Schlaeger
Ust-ID: DE289237879
Eingetragen am Amtsgericht Charlottenburg HRB 149173 B