Re: Simplifying our RCU models

From: Lai Jiangshan
Date: Fri Mar 09 2018 - 04:49:06 EST


On Tue, Mar 6, 2018 at 12:14 AM, Paul E. McKenney
<paulmck@xxxxxxxxxxxxxxxxxx> wrote:
> On Mon, Mar 05, 2018 at 08:33:20AM -0600, Eric W. Biederman wrote:
>>
>> Moving this discussion to a public list as discussing how to reduce the
>> number of rcu variants does not make sense in private. We should have
>> an archive of such discussions.
>>
>> Ingo Molnar <mingo@xxxxxxxxxx> writes:
>>
>> > * Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx> wrote:
>> >
>> >> > So if people really want that low-cost RCU, and some people really
>> >> > need the sleepable version, the only one that can _possibly_ be dumped
>> >> > is the preempt one.
>> >> >
>> >> > But I may - again - be confused and/or missing something.
>> >>
>> >> I am going to do something very stupid and say that I was instead thinking in
>> >> terms of getting rid of RCU-bh, thus reminding you of its existence. ;-)
>> >>
>> >> The reason for believing that it is possible to get rid of RCU-bh is the work
>> >> that has gone into improving the forward progress of RCU grace periods under
>> >> heavy load and in corner-case workloads.
>> >>
>> >
>> > [...]
>> >
>> >> The other reason for RCU-sched is it has the side effect of waiting
>> >> for all in-flight hardware interrupt handlers, NMI handlers, and
>> >> preempt-disable regions of code to complete, and last I checked, this side
>> >> effect is relied on. In contrast, RCU-preeempt is only guaranteed to wait
>> >> on regions of code protected by rcu_read_lock() and rcu_read_unlock().
>> >
>> > Instead of only trying to fix the documentation (which is never a bad idea but it
>> > is fighting the symptom in this case), I think the first step should be to
>> > simplify the RCU read side APIs of RCU from 4 APIs:
>> >
>> > rcu_read_lock()
>> > srcu_read_lock()
>> > rcu_read_lock_sched()
>> > rcu_read_lock_bh()
>> >
>> > ... which have ~8 further sub-model variations depending on CONFIG_PREEMPT,
>> > CONFIG_PREEMPT_RCU - which is really a crazy design!
>
> If it is possible to set CONFIG_PREEMPT_RCU differently than CONFIG_PREEMPT,
> then that is a bug that I need to fix.
>
>> > I think we could reduce this to just two APIs with no Kconfig dependencies:
>> >
>> > rcu_read_lock()
>> > rcu_read_lock_preempt_disable()
>> >
>> > Which would be much, much simpler.
>
> No argument on the simpler part, at least from an API perspective.
>
>> > This is how we could do it I think:
>> >
>> > 1)
>> >
>> > Getting rid of the _bh() variant should be reasonably simple and involve a
>> > treewide replacement of:
>> >
>> > rcu_read_lock_bh() -> local_bh_disable()
>> > rcu_read_unlock_bh() -> local_bh_enable()
>> >
>> > Correct?
>
> Assuming that I have done enough forward-progress work on grace periods, yes.
>
>> > 2)
>> >
>> > Further reducing the variants is harder, due to this main asymmetry:
>> >
>> > !PREEMPT_RCU PREEMPT_RCU=y
>> > rcu_read_lock_sched(): atomic atomic
>> > rcu_read_lock(): atomic preemptible
>> >
>> > ('atomic' here is meant in the scheduler, non-preemptible sense.)
>> >
>> > But if we look at the bigger API picture:
>> >
>> > !PREEMPT_RCU PREEMPT_RCU=y
>> > rcu_read_lock(): atomic preemptiblep
>> > rcu_read_lock_sched(): atomic atomic
>> > srcu_read_lock(): preemptible preemptible
>> >
>> > Then we could maintain full read side API flexibility by making PREEMPT_RCU=y the
>> > only model, merging it with SRCU and using these main read side APIs:
>> >
>> > rcu_read_lock_preempt_disable((): atomic
>> > rcu_read_lock() preemptible
>
> One issue with merging SRCU into rcu_read_lock() is the general blocking
> within SRCU readers. Once merged in, these guys block everyone. We should
> focus initially on the non-SRCU variants.
>
> On the other hand, Linus's suggestion of merging rcu_read_lock_sched()
> into rcu_read_lock() just might be feasible. If that really does pan
> out, we end up with the following:
>
> !PREEMPT PREEMPT=y
> rcu_read_lock(): atomic preemptible
> srcu_read_lock(): preemptible preemptible
>
> In this model, rcu_read_lock_sched() maps to preempt_disable() and (as
> you say above) rcu_read_lock_bh() maps to local_bh_disable(). The way
> this works is that in PREEMPT=y kernels, synchronize_rcu() waits not
> only for RCU read-side critical sections, but also for regions of code
> with preemption disabled. The main caveat seems to be that there be an
> assumed point of preemptibility between each interrupt and each softirq
> handler, which should be OK.
>
> There will be some adjustments required for lockdep-RCU, but that should
> be reasonably straightforward.
>
> Seem reasonable?

It's good. I hope there is only one global(non-srcu) rcu variant.

It does have the trade-off, the grace period will be extended a little
in some cases,
so will the call_rcu()/synchronze_rcu(). But it simplifies the coding a lot.

>
>> > It's a _really_ simple and straightforward RCU model, with very obvious semantics
>> > all around:
>> >
>> > - Note how the 'atomic' (non-preempt) variant uses the well-known
>> > preempt_disable() name as a postfix to signal its main property. (It's also a
>> > bit of a mouthful, which should discourage over-use.)
>
> My thought is to eliminate the atomic variant entirely. If you want
> to disable preemption, interrupts, or whatever, you simply do so.
> It might turn out that there are documentation benefits to having a
> separate rcu_read_lock_preempt_disable() that maps to preempt_disable()
> with lockdep semantics, and if so, that can be provided trivially.
>
>> > - The read side APIs are really as straightforward as possible: there's no SRCU
>> > distinction on the read side, no _bh() distinction and no _sched() distinction.
>> > (On -rt all of these would turn into preemptible sections,
>> > obviously.)
>
> Agreed, and both models accomplish that.
>
>> And it looses the one advantage of srcu_read_lock. That you don't have
>> to wait for the entire world. If you actually allow sleeping that is an
>> important distinction to have. Or are you proposing that we add the
>> equivalent of init_srcu_struct to all of the rcu users?
>
> I am instead proposing folding rcu_read_lock_bh() and rcu_read_lock_sched()
> into rcu_read_lock(), and leaving srcu_read_lock() separate.
>
>> That rcu_read_lock would need to take an argument about which rcu region
>> we are talking about.
>
> From what I can see, it would be far better to leave SRCU separate. As you
> say, it really does have very different semantics.
>
>> > rcu_read_lock_preempt_disable() would essentially be all the current
>> > rcu_read_lock_sched() users (where the _sched() postfix was a confusing misnomer
>> > anyway).
>
> I agree that rcu_read_lock_preempt_disable() is a better name.
> We might not need it at all, though. There are only about 20 uses of
> rcu_read_lock_sched() in v4.15. ;-)
>
>> > Wrt. merging SRCU and RCU: this can be done by making PREEMPT_RCU=y the one and
>> > only main RCU model and converting all SRCU users to main RCU. This is relatively
>> > straightforward to perform, as there are only ~170 SRCU critical sections, versus
>> > the 3000+ main RCU critical sections ...
>>
>> It really sounds like you are talking about adding a requirement that
>> everyone update their rcu_read_lock() calls with information about which
>> region you are talking about. That seems like quite a bit of work.
>
> Agreed, merging RCU, RCU-bh, and RCU-sched seems much more straightforward
> to me from the viewpoint of both usage and implementation.
>
>> Doing something implicit when PREEMPT_RCU=y and converting
>> "rcu_read_lock()" to "srcu_read_lock(&kernel_srcu_region)" only in that
>> case I can see.
>>
>> Except in very specific circustances I don't think I ever want to run a
>> kernel with PREEMPT_RCU the default. All of that real time stuff trades
>> off predictability with performance. Having lost enough performance to
>> spectre and meltdown I don't think it makes sense for us all to start
>> runing predictable^H^H^H^H^H^H^H^H^H^H^H time kernels now.
>
> Yes, in PREEMPT=n kernels RCU would act exactly as it does today.
>
>> > AFAICS this should be a possible read side design that keeps correctness, without
>> > considering grace period length patterns, i.e. without considering GC latency and
>> > scalability aspects.
>> >
>> > Before we get into ways to solve the latency and scalability aspects of such a
>> > simplified RCU model, do you agree with this analysis so far, or have I missed
>> > something important wrt. correctness?
>>
>> RCU region specification. If we routinely allow preemption of rcu
>> critical sections for any length of time I can't imagine we will want to
>> wait for every possible preempted rcu critical section.
>>
>> Of course I could see the merge working the other way. Adding the
>> debugging we need to find rcu critical secions that are held to long and
>> shrinking them so we don't need PREEMPT_RCU at all.
>
> Again, from what I can see, merging rcu_read_lock(), rcu_read_lock_sched(),
> and rcu_read_lock_bh() together should get us to a much better place.
>
> Make sense, or am I missing something?
>
> Thanx, Paul
>