Re: [RFC] android: ion: How to properly clean caches for uncached allocations

From: Liam Mark
Date: Thu Mar 08 2018 - 19:45:22 EST


On Wed, 7 Mar 2018, Laura Abbott wrote:

> On 02/28/2018 09:18 PM, Liam Mark wrote:
> > The issue:
> >
> > Currently in ION if you allocate uncached memory it is possible that there
> > are still dirty lines in the cache. And often these dirty lines in the
> > cache are the zeros which were meant to clear out any sensitive kernel
> > data.
> >
> > What this means is that if you allocate uncached memory from ION, and then
> > subsequently write to that buffer (using the uncached mapping you are
> > provided by ION) then the data you have written could be corrupted at some
> > point in the future if a dirty line is evicted from the cache.
> >
> > Also this means there is a potential security issue. If an un-privileged
> > userspace user allocated uncached memory (for example from the system heap)
> > and then if they were to read from that buffer (through the un-cached
> > mapping they are provided by ION), and if some of the zeros which were
> > written to that memory are still in the cache then this un-privileged
> > userspace user could read potentially sensitive kernel data.
>
> For the use case you are describing we don't actually need the
> memory to be non-cached until it comes time to do the dma mapping.
> Here's a proposal to shoot holes in:
>
> - Before any dma_buf attach happens, all mmap mappings are cached
> - At the time attach happens, we shoot down any existing userspace
> mappings, do the dma_map with appropriate flags to clean the pages
> and then allow remapping to userspace as uncached. Really this
> looks like a variation on the old Ion faulting code which I removed
> except it's for uncached buffers instead of cached buffers.
>

Thanks Laura, I will take a look to see if I can think of any concerns.

Initial thoughts.
- What about any kernel mappings (kmap/vmap) the client has made?

- I guess it would be tempting to only do this behavior for memory that
came from buddy (as opposed to the pool since it should be clean), but we
would need to be careful that no pages sneak into the pool without being
cleaned (example: client allocs then frees without ever call
dma_buf_attach).

> Potential problems:
> - I'm not 100% about the behavior here if the attaching device
> is already dma_coherent. I also consider uncached mappings
> enough of a device specific optimization that you shouldn't
> do them unless you know it's needed.

I don't believe we want to allow uncached memory to be dma mapped by an
io-coherent device and this is something I would like to eventually block.

Since there is always a kernel cached mapping for ION uncached memory then
speculative access could still be putting lines in the cache, so when an
io-coherent device tries to read this uncached memory its snoop into the
cache could find one of these 'stale' clean cache lines and end up using
stale data.
Agree?

> - The locking/sequencing with userspace could be tricky
> since userspace may not like us ripping mappings out from
> underneath if it's trying to access.

Perhaps delay this work to the dma_map_attachment call since when the data
is dma mapped the CPU shouldn't be accessing it?

Or worst case perhaps fail all map attempts to uncached memory until the
memory has been dma mapped (and cleaned) at least once?

Thanks,
Liam

Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project