Re: [PATCH v2 1/2] ASoC: codecs: Add support for AK5558 ADC driver

From: Andy Shevchenko
Date: Fri Feb 02 2018 - 14:33:32 EST


On Fri, Feb 2, 2018 at 6:20 PM, Daniel Baluta <daniel.baluta@xxxxxxx> wrote:
> AK5558 is a 32-bit, 768 kHZ sampling, differential input ADC
> for digital audio systems.
>
> Datasheet is available at:
>
> https://www.akm.com/akm/en/file/datasheet/AK5558VN.pdf
>
> Initial patch includes support for normal and TDM modes.
>
> Signed-off-by: Junichi Wakasugi <wakasugi.jb@xxxxxxxxxxxxxxxxxxxx>
> [initial coding for 3.18 kernel]
> Signed-off-by: Mihai Serban <mihai.serban@xxxxxxx>
> [cleanups and porting to 4.9 kernel]
> Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx>
> [tdm support]
> Signed-off-by: Daniel Baluta <daniel.baluta@xxxxxxx>
> [pm support, cleanups and porting to latest kernel]

Thanks for an update.

Couple of nitpicks below, otherwise FWIW,
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>


> @@ -0,0 +1,626 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*

> + * ak5558.c -- audio driver for AK5558 ADC

I would remove filename. If file is ever be renamed this will make an
additional noise.

> + *
> + * Copyright (C) 2015 Asahi Kasei Microdevices Corporation
> + * Copyright 2018 NXP
> + */

> +#include <linux/module.h>
> +#include <linux/delay.h>
> +#include <linux/slab.h>
> +#include <linux/gpio/consumer.h>
> +#include <sound/soc.h>
> +#include <sound/soc-dapm.h>
> +#include <sound/pcm.h>
> +#include <sound/pcm_params.h>
> +#include <linux/pm_runtime.h>
> +#include <sound/initval.h>
> +#include <linux/i2c.h>
> +#include <sound/tlv.h>
> +#include <linux/of_gpio.h>
> +#include <linux/regmap.h>

I would rather keep it sorted

+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
// yeah keep an empty line here to split groups
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/tlv.h>

+#include <linux/of_gpio.h>

This one is redundant.

> +static int ak5558_set_dai_mute(struct snd_soc_dai *dai, int mute)
> +{
> + struct snd_soc_codec *codec = dai->codec;
> + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec);

> + int ndt = 0;

It might be even

int ndt = max(ak5558->fs ? 583000 / ak5558->fs : 5, 5);

> + if (!mute)
> + return 0;
> +

> + if (ak5558->fs != 0)
> + ndt = 583000 / ak5558->fs;
> +
> + msleep(max(ndt, 5));

...and here just

msleep(ndt);

But I don't know if Mark is okay with that.

> +
> + return 0;
> +}

> + pm_runtime_enable(&i2c->dev);
> + pm_runtime_disable(&client->dev);

I'm also not sure about these calls, but I leave it to you.

> +static const struct i2c_device_id ak5558_i2c_id[] = {
> + { "ak5558", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, ak5558_i2c_id);

I dunno if it's really helpful to have. Though it's up to Mark and you.

--
With Best Regards,
Andy Shevchenko