Re: [PATCH 3/4] tsi108_eth: use dma API properly

[Bjorn Helgaas]

[+cc David, FYI, I plan to merge this via PCI along with the rest of
Christoph's series]

On Wed, Jan 10, 2018 at 07:03:21PM +0100, Christoph Hellwig wrote:
> We need to pass a struct device to the dma API, even if some
> architectures still support that for legacy reasons, and should not mix
> it with the old PCI dma API.
> 
> Note that the driver also seems to never actually unmap its dma mappings,
> but to fix that we'll need someone more familar with the driver.
> 
> Signed-off-by: Christoph Hellwig <hch@xxxxxx>
> ---
>  drivers/net/ethernet/tundra/tsi108_eth.c | 36 ++++++++++++++++++--------------
>  1 file changed, 20 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/net/ethernet/tundra/tsi108_eth.c b/drivers/net/ethernet/tundra/tsi108_eth.c
> index 0624b71ab5d4..edcd1e60b30d 100644
> --- a/drivers/net/ethernet/tundra/tsi108_eth.c
> +++ b/drivers/net/ethernet/tundra/tsi108_eth.c
> @@ -152,6 +152,8 @@ struct tsi108_prv_data {
>  	u32 msg_enable;			/* debug message level */
>  	struct mii_if_info mii_if;
>  	unsigned int init_media;
> +
> +	struct platform_device *pdev;
>  };
>  
>  /* Structure for a device driver */
> @@ -703,17 +705,18 @@ static int tsi108_send_packet(struct sk_buff * skb, struct net_device *dev)
>  		data->txskbs[tx] = skb;
>  
>  		if (i == 0) {
> -			data->txring[tx].buf0 = dma_map_single(NULL, skb->data,
> -					skb_headlen(skb), DMA_TO_DEVICE);
> +			data->txring[tx].buf0 = dma_map_single(&data->pdev->dev,
> +					skb->data, skb_headlen(skb),
> +					DMA_TO_DEVICE);
>  			data->txring[tx].len = skb_headlen(skb);
>  			misc |= TSI108_TX_SOF;
>  		} else {
>  			const skb_frag_t *frag = &skb_shinfo(skb)->frags[i - 1];
>  
> -			data->txring[tx].buf0 = skb_frag_dma_map(NULL, frag,
> -								 0,
> -								 skb_frag_size(frag),
> -								 DMA_TO_DEVICE);
> +			data->txring[tx].buf0 =
> +				skb_frag_dma_map(&data->pdev->dev, frag,
> +						0, skb_frag_size(frag),
> +						DMA_TO_DEVICE);
>  			data->txring[tx].len = skb_frag_size(frag);
>  		}
>  
> @@ -808,9 +811,9 @@ static int tsi108_refill_rx(struct net_device *dev, int budget)
>  		if (!skb)
>  			break;
>  
> -		data->rxring[rx].buf0 = dma_map_single(NULL, skb->data,
> -							TSI108_RX_SKB_SIZE,
> -							DMA_FROM_DEVICE);
> +		data->rxring[rx].buf0 = dma_map_single(&data->pdev->dev,
> +				skb->data, TSI108_RX_SKB_SIZE,
> +				DMA_FROM_DEVICE);
>  
>  		/* Sometimes the hardware sets blen to zero after packet
>  		 * reception, even though the manual says that it's only ever
> @@ -1308,15 +1311,15 @@ static int tsi108_open(struct net_device *dev)
>  		       data->id, dev->irq, dev->name);
>  	}
>  
> -	data->rxring = dma_zalloc_coherent(NULL, rxring_size, &data->rxdma,
> -					   GFP_KERNEL);
> +	data->rxring = dma_zalloc_coherent(&data->pdev->dev, rxring_size,
> +			&data->rxdma, GFP_KERNEL);
>  	if (!data->rxring)
>  		return -ENOMEM;
>  
> -	data->txring = dma_zalloc_coherent(NULL, txring_size, &data->txdma,
> -					   GFP_KERNEL);
> +	data->txring = dma_zalloc_coherent(&data->pdev->dev, txring_size,
> +			&data->txdma, GFP_KERNEL);
>  	if (!data->txring) {
> -		pci_free_consistent(NULL, rxring_size, data->rxring,
> +		dma_free_coherent(&data->pdev->dev, rxring_size, data->rxring,
>  				    data->rxdma);
>  		return -ENOMEM;
>  	}
> @@ -1428,10 +1431,10 @@ static int tsi108_close(struct net_device *dev)
>  		dev_kfree_skb(skb);
>  	}
>  
> -	dma_free_coherent(0,
> +	dma_free_coherent(&data->pdev->dev,
>  			    TSI108_RXRING_LEN * sizeof(rx_desc),
>  			    data->rxring, data->rxdma);
> -	dma_free_coherent(0,
> +	dma_free_coherent(&data->pdev->dev,
>  			    TSI108_TXRING_LEN * sizeof(tx_desc),
>  			    data->txring, data->txdma);
>  
> @@ -1576,6 +1579,7 @@ tsi108_init_one(struct platform_device *pdev)
>  	printk("tsi108_eth%d: probe...\n", pdev->id);
>  	data = netdev_priv(dev);
>  	data->dev = dev;
> +	data->pdev = pdev;
>  
>  	pr_debug("tsi108_eth%d:regs:phyresgs:phy:irq_num=0x%x:0x%x:0x%x:0x%x\n",
>  			pdev->id, einfo->regs, einfo->phyregs,
> -- 
> 2.14.2
>