Re: [PATCH] clk: stm32: add configuration flags for each of the stm32 drivers

[Gabriel FERNANDEZ]

Hi Benjamin,

Just remove the extra blanck line.

Otherwise you can addmy

Acked-by: Gabriel Fernandez <gabriel.fernandez@xxxxxx>

Best regards
Gabriel

On 01/15/2018 03:21 PM, Benjamin Gaignard wrote:
> Add two configuration flags to be able to not compile all the time
> stm32f and stm32h7 drivers when ARCH_STM32 is set.
> That help to save some space on those small platforms.
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
> ---
>   drivers/clk/Kconfig  | 15 +++++++++++++++
>   drivers/clk/Makefile |  4 ++--
>   2 files changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 1c4e1aa6767e..c876eb828fc4 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -226,6 +226,21 @@ config COMMON_CLK_VC5
>   	  This driver supports the IDT VersaClock 5 and VersaClock 6
>   	  programmable clock generators.
>   
> +config COMMON_CLK_STM32F
> +	bool "Clock driver for stm32f4 and stm32f7 SoC families"
> +	depends on MACH_STM32F429 || MACH_STM32F469 || MACH_STM32F746
> +	help
> +	---help---
> +	  Support for stm32f4 and stm32f7 SoC families clocks
> +
> +config COMMON_CLK_STM32H7
> +	bool "Clock driver for stm32h7 SoC family"
> +	depends on MACH_STM32H743
> +	help
> +	---help---
> +	  Support for stm32h7 SoC family clocks
> +
> +
Removeextrablankline
>   source "drivers/clk/bcm/Kconfig"
>   source "drivers/clk/hisilicon/Kconfig"
>   source "drivers/clk/imgtec/Kconfig"
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index f7f761b02bed..4a8e063a7159 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -44,8 +44,8 @@ obj-$(CONFIG_COMMON_CLK_SCPI)           += clk-scpi.o
>   obj-$(CONFIG_COMMON_CLK_SI5351)		+= clk-si5351.o
>   obj-$(CONFIG_COMMON_CLK_SI514)		+= clk-si514.o
>   obj-$(CONFIG_COMMON_CLK_SI570)		+= clk-si570.o
> -obj-$(CONFIG_ARCH_STM32)		+= clk-stm32f4.o
> -obj-$(CONFIG_ARCH_STM32)		+= clk-stm32h7.o
> +obj-$(CONFIG_COMMON_CLK_STM32F)		+= clk-stm32f4.o
> +obj-$(CONFIG_COMMON_CLK_STM32H7)	+= clk-stm32h7.o
>   obj-$(CONFIG_ARCH_TANGO)		+= clk-tango4.o
>   obj-$(CONFIG_CLK_TWL6040)		+= clk-twl6040.o
>   obj-$(CONFIG_ARCH_U300)			+= clk-u300.o