Re: [PATCH v4 2/2] PCI: mediatek: Set up class type and vendor ID for MT7622

From: Ryder Lee
Date: Mon Dec 25 2017 - 05:28:05 EST


On Fri, 2017-12-22 at 13:39 +0800, honghui.zhang@xxxxxxxxxxxx wrote:
> From: Honghui Zhang <honghui.zhang@xxxxxxxxxxxx>
>
> The hardware default value of IDs and class type is not correct,
> fix that by setup the correct values before start up.
>
> Signed-off-by: Honghui Zhang <honghui.zhang@xxxxxxxxxxxx>
> ---
> drivers/pci/host/pcie-mediatek.c | 12 ++++++++++++
> include/linux/pci_ids.h | 3 +++
> 2 files changed, 15 insertions(+)
>
> diff --git a/drivers/pci/host/pcie-mediatek.c b/drivers/pci/host/pcie-mediatek.c
> index fc29a9a..0ef33e4 100644
> --- a/drivers/pci/host/pcie-mediatek.c
> +++ b/drivers/pci/host/pcie-mediatek.c
> @@ -74,6 +74,10 @@
>
> /* PCIe V2 per-port registers */
> #define PCIE_MSI_VECTOR 0x0c0
> +
> +#define PCIE_CONF_ID 0x100
> +#define PCIE_CONF_CLASS 0x104
> +
> #define PCIE_INT_MASK 0x420
> #define INTX_MASK GENMASK(19, 16)
> #define INTX_SHIFT 16
> @@ -393,6 +397,14 @@ static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
> val |= PCIE_CSR_LTSSM_EN(port->slot) |
> PCIE_CSR_ASPM_L1_EN(port->slot);
> writel(val, pcie->base + PCIE_SYS_CFG_V2);
> +
> + /* Set up vendor ID and device ID for MT7622*/
> + val = PCI_VENDOR_ID_MEDIATEK | (PCI_DEVICE_ID_MT7622 << 16);
> + writel(val, port->base + PCIE_CONF_ID);

IMHO, this is a general function so you can ignore "device ID for
MT7622" here, but just make sure class code/vendor ID correct.

> + /* Set up class code for MT7622 */
> + val = PCI_CLASS_BRIDGE_PCI << 16;
> + writel(val, port->base + PCIE_CONF_CLASS);
> }
>
> /* Assert all reset signals */
> diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
> index ab20dc5..000c5df 100644
> --- a/include/linux/pci_ids.h
> +++ b/include/linux/pci_ids.h
> @@ -2113,6 +2113,9 @@
>
> #define PCI_VENDOR_ID_MYRICOM 0x14c1
>
> +#define PCI_VENDOR_ID_MEDIATEK 0x14c3
> +#define PCI_DEVICE_ID_MT7622 0x5396
> +
> #define PCI_VENDOR_ID_TITAN 0x14D2
> #define PCI_DEVICE_ID_TITAN_010L 0x8001
> #define PCI_DEVICE_ID_TITAN_100L 0x8010