[PATCH 13/25] arm: spear: dts: Remove leading 0x and 0s from bindings notation

From: Mathieu Malaterre
Date: Fri Dec 15 2017 - 07:52:02 EST


Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

and

Warning (unit_address_format): Node /XXX unit name should not have leading 0s

Converted using the following command:

find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C

For simplicity, two sed expressions were used to solve each warnings separately.

To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:

https://elinux.org/Device_Tree_Linux#Linux_conventions

This will solve as a side effect warning:

Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"

This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")

Reported-by: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
Suggested-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Mathieu Malaterre <malat@xxxxxxxxxx>
---
arch/arm/boot/dts/spear1310-evb.dts | 4 ++--
arch/arm/boot/dts/spear300.dtsi | 2 +-
arch/arm/boot/dts/spear310.dtsi | 2 +-
arch/arm/boot/dts/spear320-hmi.dts | 4 ++--
arch/arm/boot/dts/spear320.dtsi | 2 +-
5 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index 84101e4eebbf..438e3e16aeda 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -133,7 +133,7 @@
label = "u-boot";
reg = <0x80000 0x140000>;
};
- partition@1C0000 {
+ partition@1c0000 {
label = "environment";
reg = <0x1C0000 0x40000>;
};
@@ -145,7 +145,7 @@
label = "linux";
reg = <0x240000 0xC00000>;
};
- partition@E40000 {
+ partition@e40000 {
label = "rootfs";
reg = <0xE40000 0x0>;
};
diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
index f4e92e599729..266fefa67223 100644
--- a/arch/arm/boot/dts/spear300.dtsi
+++ b/arch/arm/boot/dts/spear300.dtsi
@@ -52,7 +52,7 @@
status = "disabled";
};

- shirq: interrupt-controller@0x50000000 {
+ shirq: interrupt-controller@50000000 {
compatible = "st,spear300-shirq";
reg = <0x50000000 0x1000>;
interrupts = <28>;
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
index da210b454753..f995ecf09acf 100644
--- a/arch/arm/boot/dts/spear310.dtsi
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -40,7 +40,7 @@
status = "disabled";
};

- shirq: interrupt-controller@0xb4000000 {
+ shirq: interrupt-controller@b4000000 {
compatible = "st,spear310-shirq";
reg = <0xb4000000 0x1000>;
interrupts = <28 29 30 1>;
diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts
index 0d0da1f65f0e..6591cd616d0e 100644
--- a/arch/arm/boot/dts/spear320-hmi.dts
+++ b/arch/arm/boot/dts/spear320-hmi.dts
@@ -113,7 +113,7 @@
label = "u-boot";
reg = <0x80000 0x140000>;
};
- partition@1C0000 {
+ partition@1c0000 {
label = "environment";
reg = <0x1C0000 0x40000>;
};
@@ -125,7 +125,7 @@
label = "linux";
reg = <0x240000 0xC00000>;
};
- partition@E40000 {
+ partition@e40000 {
label = "rootfs";
reg = <0xE40000 0x0>;
};
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
index 22be6e5edaac..2a062a3ee139 100644
--- a/arch/arm/boot/dts/spear320.dtsi
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -55,7 +55,7 @@
status = "disabled";
};

- shirq: interrupt-controller@0xb3000000 {
+ shirq: interrupt-controller@b3000000 {
compatible = "st,spear320-shirq";
reg = <0xb3000000 0x1000>;
interrupts = <30 28 29 1>;
--
2.11.0