[PATCH v7 10/13] dt-bindings: Add qcom slimbus controller bindings

From: srinivas . kandagatla
Date: Wed Nov 15 2017 - 09:16:47 EST


From: Sagar Dharia <sdharia@xxxxxxxxxxxxxx>

This patch add device tree bindings for Qualcomm slimbus controller.

Signed-off-by: Sagar Dharia <sdharia@xxxxxxxxxxxxxx>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
.../devicetree/bindings/slimbus/slim-qcom-ctrl.txt | 43 ++++++++++++++++++++++
1 file changed, 43 insertions(+)
create mode 100644 Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt

diff --git a/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt
new file mode 100644
index 000000000000..e4d28910b2e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt
@@ -0,0 +1,43 @@
+Qualcomm SLIMBUS controller
+This controller is used if applications processor driver controls slimbus
+master component.
+
+Required properties:
+
+ - #address-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt
+ - #size-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt
+
+ - reg : Offset and length of the register region(s) for the device
+ - reg-names : Register region name(s) referenced in reg above
+ Required register resource entries are:
+ "ctrl": Physical address of controller register blocks
+ - compatible : should be "qcom,<SOC-NAME>-slim" for SOC specific compatible
+ followed by "qcom,slim" for fallback.
+ - interrupts : Interrupt number used by this controller
+ - clocks : Interface and core clocks used by this slimbus controller
+ - clock-names : Required clock-name entries are:
+ "iface_clk" : Interface clock for this controller
+ "core_clk" : Interrupt for controller core's BAM
+
+
+Optional property:
+ - reg entry for slew rate : If slew rate control register is provided, this
+ entry should be used.
+ - reg-name for slew rate: "slew"
+
+Example:
+
+ slim@28080000 {
+ compatible = "qcom,apq8064-slim", "qcom,slim";
+ reg = <0x28080000 0x2000>,
+ interrupts = <0 33 0>;
+ clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
+ clock-names = "iface", "core";
+ #address-cells = <2>;
+ #size-cell = <0>;
+
+ codec: wcd9310@1,0{
+ compatible = "slim217,60";
+ reg = <1 0>;
+ };
+ };
--
2.15.0