Re: [PATCH 2/2] backlight: pwm_bl: add configurable delay between re-enabling PWM and switching backlight power on

From: Lee Jones
Date: Wed Nov 08 2017 - 04:12:26 EST


On Wed, 08 Nov 2017, Lothar WaÃmann wrote:

> Hi,
>
> On Tue, 7 Nov 2017 18:46:18 -0600 Rob Herring wrote:
> > On Mon, Oct 30, 2017 at 5:33 AM, Lee Jones <lee.jones@xxxxxxxxxx> wrote:
> > > On Fri, 27 Oct 2017, Rob Herring wrote:
> > >
> > >> On Thu, Oct 26, 2017 at 02:49:46PM +0200, Lothar WaÃmann wrote:
> > >> > When switching the backlight on, the LCD may need some time to adjust
> > >> > to the configured PWM duty cycle. Add a configurable delay between
> > >> > configuring the PWM and enabling the backlight regulator to account
> > >> > for this.
> > >> >
> > >> > Signed-off-by: Lothar WaÃmann <LW@xxxxxxxxxxxxxxxxxxx>
> > >> > ---
> > >> > .../bindings/leds/backlight/pwm-backlight.txt | 4 ++++
> > >> > drivers/video/backlight/pwm_bl.c | 22 +++++++++++++++++++---
> > >> > 2 files changed, 23 insertions(+), 3 deletions(-)
> > >> >
> > >> > diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt
> > >> > index 764db86..95594c3 100644
> > >> > --- a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt
> > >> > +++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt
> > >> > @@ -17,6 +17,10 @@ Optional properties:
> > >> > "pwms" property (see PWM binding[0])
> > >> > - enable-gpios: contains a single GPIO specifier for the GPIO which enables
> > >> > and disables the backlight (see GPIO binding[1])
> > >> > + - turn-on-delay-ms: delay in milliseconds between configuring the PWM
> > >> > + and switching PWM on. This may be required to eliminate
> > >> > + flicker when switching the PWM on after it has been
> > >> > + disabled.
> > >>
> > >> The subject talks about turning on the backlight regulator, but this
> > >> only talks about the PWM.
> > >
> > > From my understanding "switching PWM on" == enabling the regulator.
> > >
> > > I don't see any disparity here. Or am I missing something?
> >
> > The delay is from (re-)enabling the PWM (turning it on) to switching
> > backlight power on. That sounds like 2 different things to me.

I read it as the delay being between "configuring the PWM" (still not
on) and "switching <the> PWM on" (enabling the regulator).

> The text should better read:
> + - turn-on-delay-ms: delay in milliseconds between configuring the PWM
> + and switching the backlight regulator on. This may be
> + required to eliminate flicker when switching the backlight
> + on after it had been disabled.

How is the regulator described in the datasheet?

Is it for the Backlight or the PWM?

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog