[PATCH] ASoC: stm32: Add synchronization to SAI bindings

From: Olivier Moysan
Date: Thu Oct 19 2017 - 09:03:17 EST


Add synchronization configuration to STM32 SAI bindings.
This patch also adds peripheral clock which is required
to access synchronization register.

Signed-off-by: Olivier Moysan <olivier.moysan@xxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
Documentation/devicetree/bindings/sound/st,stm32-sai.txt | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
index f1c5ae59e7c9..1f9cd7095337 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
@@ -10,13 +10,21 @@ Required properties:
- reg: Base address and size of SAI common register set.
- clocks: Must contain phandle and clock specifier pairs for each entry
in clock-names.
- - clock-names: Must contain "x8k" and "x11k"
+ - clock-names: Must contain "pclk" "x8k" and "x11k"
+ "pclk": Clock which feeds the peripheral bus interface.
+ Mandatory for "st,stm32h7-sai" compatible.
+ Not used for "st,stm32f4-sai" compatible.
"x8k": SAI parent clock for sampling rates multiple of 8kHz.
"x11k": SAI parent clock for sampling rates multiple of 11.025kHz.
- interrupts: cpu DAI interrupt line shared by SAI sub-blocks

Optional properties:
- resets: Reference to a reset controller asserting the SAI
+ - st,sync: specify synchronization mode.
+ By default SAI sub-block is in asynchronous mode.
+ This property sets SAI sub-block as slave of another SAI sub-block.
+ Must contain the phandle and index of the sai sub-block providing
+ the synchronization.

SAI subnodes:
Two subnodes corresponding to SAI sub-block instances A et B can be defined.
@@ -52,8 +60,8 @@ sai1: sai1@40015800 {
#size-cells = <1>;
ranges = <0 0x40015800 0x400>;
reg = <0x40015800 0x4>;
- clocks = <&rcc PLL1_Q>, <&rcc PLL2_P>;
- clock-names = "x8k", "x11k";
+ clocks = <&rcc SAI1_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
+ clock-names = "pclk", "x8k", "x11k";
interrupts = <87>;

sai1a: audio-controller@40015804 {
--
2.14.1