[PATCH 01/18] thermal/drivers/hisi: Fix missing interrupt enablement

From: Daniel Lezcano
Date: Thu Oct 19 2017 - 13:08:39 EST


The interrupt for the temperature threshold is not enabled at the end of the
probe function, enable it after the setup is complete.

On the other side, the irq_enabled is not correctly set as we are checking if
the interrupt is masked where 'yes' means irq_enabled=false.

irq_get_irqchip_state(data->irq, IRQCHIP_STATE_MASKED,
&data->irq_enabled);

As we are always enabling the interrupt, it is pointless to check if
the interrupt is masked or not, just set irq_enabled to 'true'.

Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
Reviewed-by: Leo Yan <leo.yan@xxxxxxxxxx>
Tested-by: Leo Yan <leo.yan@xxxxxxxxxx>
---
drivers/thermal/hisi_thermal.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
index 9c3ce34..f3b50b0 100644
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -345,8 +345,7 @@ static int hisi_thermal_probe(struct platform_device *pdev)
}

hisi_thermal_enable_bind_irq_sensor(data);
- irq_get_irqchip_state(data->irq, IRQCHIP_STATE_MASKED,
- &data->irq_enabled);
+ data->irq_enabled = true;

for (i = 0; i < HISI_MAX_SENSORS; ++i) {
ret = hisi_thermal_register_sensor(pdev, data,
@@ -358,6 +357,8 @@ static int hisi_thermal_probe(struct platform_device *pdev)
hisi_thermal_toggle_sensor(&data->sensors[i], true);
}

+ enable_irq(data->irq);
+
return 0;
}

--
2.7.4