Re: [PATCH v2 2/2] extcon: add optional debounce-timeout-ms attribute

From: Chanwoo Choi
Date: Thu Oct 19 2017 - 01:22:46 EST


On 2017ë 10ì 19ì 13:59, Chanwoo Choi wrote:
> Hi,
>
> On 2017ë 10ì 19ì 12:26, Raveendra Padasalagi wrote:
>> Add changes to capture optional dt attribute "debounce-timeout-ms"
>> provided in extcon node and used the same value if provided otherwise
>> default value of 20ms is used for id and vbus gpios debounce time.
>>
>> Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@xxxxxxxxxxxx>
>> Reviewed-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
>> Reviewed-by: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
>> ---
>>
>> Changes in v2:
>> Rename gpio_debounce_timeout_ms to debounce_usecs
>>
>> drivers/extcon/extcon-usb-gpio.c | 12 +++++++++---
>> 1 file changed, 9 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c
>> index 9c925b0..76ef1da 100644
>> --- a/drivers/extcon/extcon-usb-gpio.c
>> +++ b/drivers/extcon/extcon-usb-gpio.c
>> @@ -41,6 +41,7 @@ struct usb_extcon_info {
>>
>> unsigned long debounce_jiffies;
>> struct delayed_work wq_detcable;
>> + unsigned int debounce_usecs;
>> };
>>
>> static const unsigned int usb_extcon_cable[] = {
>> @@ -133,6 +134,11 @@ static int usb_extcon_probe(struct platform_device *pdev)
>> if (IS_ERR(info->vbus_gpiod))
>> return PTR_ERR(info->vbus_gpiod);
>>
>> + ret = of_property_read_u32(np, "input-debounce",
>> + &info->debounce_usecs);
>> + if (ret)
>> + info->debounce_usecs = USB_GPIO_DEBOUNCE_MS;
>
> The USB_GPIO_DEBOUNCE_MS indicates 20 millisecond.
> You need to redefine it as following:
> -#define USB_GPIO_DEBOUNCE_MS 20 /* ms */
> +#define USB_GPIO_DEBOUNCE_USEC 20000
>
> info->debounce_usecs = USB_GPIO_DEBOUNCE_USEC;
>
> or
> info->debounce_usecs = USB_GPIO_DEBOUNCE_MS * 1000;
>
>
>> +
>> info->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable);
>> if (IS_ERR(info->edev)) {
>> dev_err(dev, "failed to allocate extcon device\n");
>> @@ -147,13 +153,13 @@ static int usb_extcon_probe(struct platform_device *pdev)
>>
>> if (info->id_gpiod)
>> ret = gpiod_set_debounce(info->id_gpiod,
>> - USB_GPIO_DEBOUNCE_MS * 1000);
>> + info->debounce_usecs * 1000);
>
> The debounce_usecs is already microsecond, You don't need to mutiply with 1000.
>
>
>> if (!ret && info->vbus_gpiod)
>> ret = gpiod_set_debounce(info->vbus_gpiod,
>> - USB_GPIO_DEBOUNCE_MS * 1000);
>> + info->debounce_usecs * 1000);

You don't need to mutiply with 1000.

>>
>> if (ret < 0)
>> - info->debounce_jiffies = msecs_to_jiffies(USB_GPIO_DEBOUNCE_MS);
>> + info->debounce_jiffies = msecs_to_jiffies(info->debounce_usecs);

You should you the 'usecs_to_jiffies' because info->debounce_usecs indicates the usec.

--
Best Regards,
Chanwoo Choi
Samsung Electronics