Re: [RESEND PATCH v5 10/16] mtd: nand: qcom: add command elements in BAM transaction

From: Boris Brezillon
Date: Thu Oct 05 2017 - 03:22:36 EST


On Mon, 25 Sep 2017 13:21:25 +0530
Abhishek Sahu <absahu@xxxxxxxxxxxxxx> wrote:

> All the QPIC register read/write through BAM DMA requires
> command descriptor which contains the array of command elements.
>
> Reviewed-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
> Signed-off-by: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>

Applied both.

Thanks,

Boris

> ---
>
> * Changes from v4: None
>
> The BAM DMA patches [1] got merged in 4.14-rc1 so now all the build
> dependencies are solved and this patch can be merged.
> This patch can be cleanly applied over v4.14-rc1.
>
> [1] http://www.spinics.net/lists/dmaengine/msg13665.html
>
> drivers/mtd/nand/qcom_nandc.c | 19 ++++++++++++++++++-
> 1 file changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c
> index 7977a70..b0a4734 100644
> --- a/drivers/mtd/nand/qcom_nandc.c
> +++ b/drivers/mtd/nand/qcom_nandc.c
> @@ -22,6 +22,7 @@
> #include <linux/of.h>
> #include <linux/of_device.h>
> #include <linux/delay.h>
> +#include <linux/dma/qcom_bam_dma.h>
>
> /* NANDc reg offsets */
> #define NAND_FLASH_CMD 0x00
> @@ -199,6 +200,7 @@
> */
> #define dev_cmd_reg_addr(nandc, reg) ((nandc)->props->dev_cmd_reg_start + (reg))
>
> +#define QPIC_PER_CW_CMD_ELEMENTS 32
> #define QPIC_PER_CW_CMD_SGL 32
> #define QPIC_PER_CW_DATA_SGL 8
>
> @@ -221,8 +223,13 @@
> /*
> * This data type corresponds to the BAM transaction which will be used for all
> * NAND transfers.
> + * @bam_ce - the array of BAM command elements
> * @cmd_sgl - sgl for NAND BAM command pipe
> * @data_sgl - sgl for NAND BAM consumer/producer pipe
> + * @bam_ce_pos - the index in bam_ce which is available for next sgl
> + * @bam_ce_start - the index in bam_ce which marks the start position ce
> + * for current sgl. It will be used for size calculation
> + * for current sgl
> * @cmd_sgl_pos - current index in command sgl.
> * @cmd_sgl_start - start index in command sgl.
> * @tx_sgl_pos - current index in data sgl for tx.
> @@ -231,8 +238,11 @@
> * @rx_sgl_start - start index in data sgl for rx.
> */
> struct bam_transaction {
> + struct bam_cmd_element *bam_ce;
> struct scatterlist *cmd_sgl;
> struct scatterlist *data_sgl;
> + u32 bam_ce_pos;
> + u32 bam_ce_start;
> u32 cmd_sgl_pos;
> u32 cmd_sgl_start;
> u32 tx_sgl_pos;
> @@ -462,7 +472,8 @@ static void free_bam_transaction(struct qcom_nand_controller *nandc)
>
> bam_txn_size =
> sizeof(*bam_txn) + num_cw *
> - ((sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) +
> + ((sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS) +
> + (sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) +
> (sizeof(*bam_txn->data_sgl) * QPIC_PER_CW_DATA_SGL));
>
> bam_txn_buf = devm_kzalloc(nandc->dev, bam_txn_size, GFP_KERNEL);
> @@ -472,6 +483,10 @@ static void free_bam_transaction(struct qcom_nand_controller *nandc)
> bam_txn = bam_txn_buf;
> bam_txn_buf += sizeof(*bam_txn);
>
> + bam_txn->bam_ce = bam_txn_buf;
> + bam_txn_buf +=
> + sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS * num_cw;
> +
> bam_txn->cmd_sgl = bam_txn_buf;
> bam_txn_buf +=
> sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL * num_cw;
> @@ -489,6 +504,8 @@ static void clear_bam_transaction(struct qcom_nand_controller *nandc)
> if (!nandc->props->is_bam)
> return;
>
> + bam_txn->bam_ce_pos = 0;
> + bam_txn->bam_ce_start = 0;
> bam_txn->cmd_sgl_pos = 0;
> bam_txn->cmd_sgl_start = 0;
> bam_txn->tx_sgl_pos = 0;