[PATCH 3/4] irqchip: imgpdc: Set sys wake polarities to active high

From: Ed Blake
Date: Mon Oct 02 2017 - 05:56:42 EST


Set all sys wake polarities to active high during initial setup. The
default is active low, which currently causes the 'flow_type' passed
into the set_type function to be effectively inverted.

Signed-off-by: Ed Blake <ed.blake@xxxxxxxxxxx>
---
drivers/irqchip/irq-imgpdc.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-imgpdc.c b/drivers/irqchip/irq-imgpdc.c
index 22d8f8a..d1bcfef 100644
--- a/drivers/irqchip/irq-imgpdc.c
+++ b/drivers/irqchip/irq-imgpdc.c
@@ -49,6 +49,8 @@
#define PDC_IRQ_ROUTE_EXT_EN_WD 0x00000004
#define PDC_IRQ_ROUTE_EXT_EN_IR 0x00000002
#define PDC_IRQ_ROUTE_EXT_EN_RTC 0x00000001
+#define PDC_SYS_WAKE_POL 0x00000020
+#define PDC_SYS_WAKE_POL_SHIFT 5
#define PDC_SYS_WAKE_RESET 0x00000010
#define PDC_SYS_WAKE_INT_MODE 0x0000000e
#define PDC_SYS_WAKE_INT_MODE_SHIFT 1
@@ -63,6 +65,9 @@
#define PDC_SYS_WAKE_INT_CHANGE 0x6
#define PDC_SYS_WAKE_INT_NONE 0x4

+#define PDC_SYS_WAKE_ACTIVE_LOW 0x0
+#define PDC_SYS_WAKE_ACTIVE_HIGH 0x1
+
/**
* struct pdc_intc_priv - private pdc interrupt data.
* @nr_perips: Number of peripheral interrupt signals.
@@ -335,8 +340,9 @@ static void pdc_intc_setup(struct pdc_intc_priv *priv)
for (i = 0; i < priv->nr_syswakes; ++i) {
/* set the IRQ mode to none */
soc_sys_wake_regoff = PDC_SYS_WAKE_BASE + i*PDC_SYS_WAKE_STRIDE;
- soc_sys_wake = PDC_SYS_WAKE_INT_NONE
- << PDC_SYS_WAKE_INT_MODE_SHIFT;
+ soc_sys_wake =
+ PDC_SYS_WAKE_ACTIVE_HIGH << PDC_SYS_WAKE_POL_SHIFT |
+ PDC_SYS_WAKE_INT_NONE << PDC_SYS_WAKE_INT_MODE_SHIFT;
pdc_write(priv, soc_sys_wake_regoff, soc_sys_wake);
}
}
--
1.9.1