Re: [PATCH v3] ARC: [plat-hsdk]: Add reset controller node to manage ethernet reset

From: Vineet Gupta
Date: Wed Sep 27 2017 - 13:40:38 EST


On 09/22/2017 09:49 AM, Eugeniy Paltsev wrote:
DW ethernet controller on HSDK hangs sometimes after SW reset, so
add reset node to make possible to reset DW ethernet controller HW.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@xxxxxxxxxxxx>
---
Changes v2 -> v3:
* Remove v1 suffix as we finaly got rid of v1 suffix in reset
driver and docs.
* Rename reset node to "reset-controller" for consistency with
the other bindings.

Changes v1 -> v2:
* Enable HSDK reset driver in hsdk_defconfig

arch/arc/boot/dts/hsdk.dts | 9 +++++++++
arch/arc/configs/hsdk_defconfig | 1 +
2 files changed, 10 insertions(+)

diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index b922f3f..8adde1b 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -12,6 +12,7 @@
/dts-v1/;
#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/reset/snps,hsdk-reset.h>
/ {
model = "snps,hsdk";
@@ -102,6 +103,12 @@
ranges = <0x00000000 0xf0000000 0x10000000>;
+ cgu_rst: reset-controller@8a0 {
+ compatible = "snps,hsdk-reset";
+ #reset-cells = <1>;
+ reg = <0x8A0 0x4>, <0xFF0 0x4>;
+ };
+
core_clk: core-clk@0 {
compatible = "snps,hsdk-core-pll-clock";
reg = <0x00 0x10>, <0x14B8 0x4>;
@@ -158,6 +165,8 @@
clocks = <&gmacclk>;
clock-names = "stmmaceth";
phy-handle = <&phy0>;
+ resets = <&cgu_rst HSDK_ETH_RESET>;
+ reset-names = "stmmaceth";
mdio {
#address-cells = <1>;
diff --git a/arch/arc/configs/hsdk_defconfig b/arch/arc/configs/hsdk_defconfig
index 7b8f8fa..15f0f6b 100644
--- a/arch/arc/configs/hsdk_defconfig
+++ b/arch/arc/configs/hsdk_defconfig
@@ -63,6 +63,7 @@ CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_DW=y
# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_RESET_HSDK=y

Since we need this feature for our platform, better to just select it in Kconfig.

I can fix it up here if you agree !

-Vineet

CONFIG_EXT3_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y