[PATCH 00/10] ARM: bcm: Add support for Broadcom Hurricane 2 SoC

From: Florian Fainelli
Date: Mon Sep 25 2017 - 20:09:51 EST


Hi all,

This patch series adds basic (boot to prompt with essential peripherals
working) support for Broadcom's Hurricane 2 SoC which is found in switching
applications.

This is also an iProc-family chip with a number of variations, including
some in the clock controller that I have not been able to identify yet.

Florian Fainelli (10):
MAINTAINERS: Update Broadcom iProc regexp with Hurricane 2
dt-bindings: Add documentation for Broadcom Hurricane 2 SoCs
ARM: bcm: Add support for Broadcom Hurricane 2 SoC
dt-bindings: Document Broadcom Hurricane 2 clocks
clk: bcm: Add Broadcom Hurricane 2 clock support
ARM: dts: Add Broadcom Hurricane 2 DTS include file
ARM: debug: Add Hurricane 2 UART2 debug addresses
dt-bindings: Add Ubiquiti Networks vendor prefix
ARM: dts: Hurricane 2: Add basic support for Ubiquiti UniFi Switch 8
ARM: multi_v7_defconfig: Enable CONFIG_ARCH_BCM_HR2

.../devicetree/bindings/arm/bcm/brcm,hr2.txt | 14 +
.../bindings/clock/brcm,iproc-clocks.txt | 14 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
MAINTAINERS | 1 +
arch/arm/Kconfig.debug | 10 +-
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/bcm-hr2.dtsi | 368 +++++++++++++++++++++
arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts | 85 +++++
arch/arm/configs/multi_v7_defconfig | 1 +
arch/arm/mach-bcm/Kconfig | 9 +
arch/arm/mach-bcm/Makefile | 3 +
arch/arm/mach-bcm/bcm_hr2.c | 25 ++
drivers/clk/bcm/Kconfig | 9 +
drivers/clk/bcm/Makefile | 1 +
drivers/clk/bcm/clk-hr2.c | 27 ++
15 files changed, 569 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt
create mode 100644 arch/arm/boot/dts/bcm-hr2.dtsi
create mode 100644 arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
create mode 100644 arch/arm/mach-bcm/bcm_hr2.c
create mode 100644 drivers/clk/bcm/clk-hr2.c

--
2.14.1