Re: [PATCH] uwb: ensure that endpoint is interrupt

From: Greg Kroah-Hartman
Date: Thu Sep 14 2017 - 12:09:15 EST


On Thu, Sep 14, 2017 at 04:52:59PM +0200, Andrey Konovalov wrote:
> hwarc_neep_init() assumes that endpoint 0 is interrupt, but there's no
> check for that, which results in a WARNING in USB core code, when a bad
> USB descriptor is provided from a device:
>
> usb 1-1: BOGUS urb xfer, pipe 1 != type 3
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 3 at drivers/usb/core/urb.c:449 usb_submit_urb+0xf8a/0x11d0
> Modules linked in:
> CPU: 0 PID: 3 Comm: kworker/0:0 Not tainted 4.13.0+ #111
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
> Workqueue: usb_hub_wq hub_event
> task: ffff88006bdc1a00 task.stack: ffff88006bde8000
> RIP: 0010:usb_submit_urb+0xf8a/0x11d0 drivers/usb/core/urb.c:448
> RSP: 0018:ffff88006bdee3c0 EFLAGS: 00010282
> RAX: 0000000000000029 RBX: ffff8800672a7200 RCX: 0000000000000000
> RDX: 0000000000000029 RSI: ffff88006c815c78 RDI: ffffed000d7bdc6a
> RBP: ffff88006bdee4c0 R08: fffffbfff0fe00ff R09: fffffbfff0fe00ff
> R10: 0000000000000018 R11: fffffbfff0fe00fe R12: 1ffff1000d7bdc7f
> R13: 0000000000000003 R14: 0000000000000001 R15: ffff88006b02cc90
> FS: 0000000000000000(0000) GS:ffff88006c800000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 00007fe4daddf000 CR3: 000000006add6000 CR4: 00000000000006f0
> Call Trace:
> hwarc_neep_init+0x4ce/0x9c0 drivers/uwb/hwa-rc.c:710
> uwb_rc_add+0x2fb/0x730 drivers/uwb/lc-rc.c:361
> hwarc_probe+0x34e/0x9b0 drivers/uwb/hwa-rc.c:858
> usb_probe_interface+0x351/0x8d0 drivers/usb/core/driver.c:361
> really_probe drivers/base/dd.c:385
> driver_probe_device+0x610/0xa00 drivers/base/dd.c:529
> __device_attach_driver+0x230/0x290 drivers/base/dd.c:625
> bus_for_each_drv+0x15e/0x210 drivers/base/bus.c:463
> __device_attach+0x269/0x3c0 drivers/base/dd.c:682
> device_initial_probe+0x1f/0x30 drivers/base/dd.c:729
> bus_probe_device+0x1da/0x280 drivers/base/bus.c:523
> device_add+0xcf9/0x1640 drivers/base/core.c:1703
> usb_set_configuration+0x1064/0x1890 drivers/usb/core/message.c:1932
> generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174
> usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266
> really_probe drivers/base/dd.c:385
> driver_probe_device+0x610/0xa00 drivers/base/dd.c:529
> __device_attach_driver+0x230/0x290 drivers/base/dd.c:625
> bus_for_each_drv+0x15e/0x210 drivers/base/bus.c:463
> __device_attach+0x269/0x3c0 drivers/base/dd.c:682
> device_initial_probe+0x1f/0x30 drivers/base/dd.c:729
> bus_probe_device+0x1da/0x280 drivers/base/bus.c:523
> device_add+0xcf9/0x1640 drivers/base/core.c:1703
> usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457
> hub_port_connect drivers/usb/core/hub.c:4890
> hub_port_connect_change drivers/usb/core/hub.c:4996
> port_event drivers/usb/core/hub.c:5102
> hub_event+0x23c8/0x37c0 drivers/usb/core/hub.c:5182
> process_one_work+0x9fb/0x1570 kernel/workqueue.c:2097
> worker_thread+0x1e4/0x1350 kernel/workqueue.c:2231
> kthread+0x324/0x3f0 kernel/kthread.c:231
> ret_from_fork+0x25/0x30 arch/x86/entry/entry_64.S:425
> Code: 48 8b 85 30 ff ff ff 48 8d b8 98 00 00 00 e8 8e 93 07 ff 45 89
> e8 44 89 f1 4c 89 fa 48 89 c6 48 c7 c7 a0 e5 55 86 e8 20 08 8f fd <0f>
> ff e9 9b f7 ff ff e8 4a 04 d6 fd e9 80 f7 ff ff e8 60 11 a6
> ---[ end trace 55d741234124cfc3 ]---
>
> Check that endpoint is interrupt.
>
> Found by syzkaller.
>
> Signed-off-by: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
> ---
> drivers/uwb/hwa-rc.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/uwb/hwa-rc.c b/drivers/uwb/hwa-rc.c
> index 35a1e777b449..9a53912bdfe9 100644
> --- a/drivers/uwb/hwa-rc.c
> +++ b/drivers/uwb/hwa-rc.c
> @@ -825,6 +825,8 @@ static int hwarc_probe(struct usb_interface *iface,
>
> if (iface->cur_altsetting->desc.bNumEndpoints < 1)
> return -ENODEV;
> + if (!usb_endpoint_xfer_int(&iface->cur_altsetting->endpoint[0].desc))
> + return -ENODEV;

Ah, nice fix, thanks for this.

greg k-h