[PATCH v2 0/2] mtd: nand: introduce NAND_ROW_ADDR_3 flag and improve Denali driver

From: Masahiro Yamada
Date: Tue Sep 12 2017 - 22:08:05 EST


Currently, Denali NAND driver always expects 3 row address cycle
devices because the driver init code hard-code the register setting.
I will fix it in 2/2.

Many drivers check chip->chipsize if the third row address cycle
is needed or not. This is not nice because 32MB, 128MB are
magic numbers. nand_scan_ident can decide it and provide a
driver-friendly flag.

1/2 is touching verious drivers.
I hope Acked-by from driver maintainers if this change looks good.


Changes in v2:
- Fix build error

Masahiro Yamada (2):
mtd: nand: introduce NAND_ROW_ADDR_3 flag
mtd: nand: denali: support two row address cycle devices

drivers/mtd/nand/atmel/nand-controller.c | 3 +--
drivers/mtd/nand/au1550nd.c | 3 +--
drivers/mtd/nand/denali.c | 4 ++--
drivers/mtd/nand/diskonchip.c | 3 +--
drivers/mtd/nand/hisi504_nand.c | 3 +--
drivers/mtd/nand/mxc_nand.c | 3 +--
drivers/mtd/nand/nand_base.c | 9 +++++----
drivers/mtd/nand/nuc900_nand.c | 2 +-
include/linux/mtd/rawnand.h | 3 +++
9 files changed, 16 insertions(+), 17 deletions(-)

--
2.7.4